Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 20 Feb 2010 21:26:52 +0100
From:      "Enrico M." <enrico@majaglug.net>
To:        freebsd-emulation@freebsd.org
Subject:   Re: virtualbox-ose 3.1.2 and 7.3-PRERELEASE
Message-ID:  <201002202126.52609.enrico@majaglug.net>
In-Reply-To: <20100214090416.GA98426@bigb3.homeftp.net>
References:  <20100212112029.GA84672@bigb3.homeftp.net> <7865b0c564344ed9a6fcfdad0b425464@bluelife.at> <20100214090416.GA98426@bigb3.homeftp.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 14 February 2010 10:04:16 {BBLister} wrote:
> On Sat, Feb 13, 2010 at 03:48:19PM +0100, Bernhard Froehlich wrote:
> > On Fri, 12 Feb 2010 19:51:57 +0200, {BBLister} <bblister@gmail.com> wrote:
> > > On Fri, Feb 12, 2010 at 12:53:48PM +0100, Bernhard Froehlich wrote:
> > >> On Fri, 12 Feb 2010 13:20:29 +0200, {BBLister} <bblister@gmail.com>
> > >>
> > >> wrote:
> > >> >> Hi there
> > >> >>
> > >> >> 02/02/2010 I had update my workstation from 7.2-STABLE to
> > >> >> 7.3-PRERELEASE. After install new kernel and world all installed
> > >> >> ports
> > >> >> also was rebuilt too by portupgrade -af. Now, I have kernel panic
> > >> >> during attempt starts any virtual machine (Win or BSD) via GUI or
> > >> >> headless.
> > >> >> Any suggestions are welcome.
> > >> >>
> > >> >> Thanks.
> > >> >>
> > >> >>
> > >> >> Details:
> > >> >>
> > >> >>
> > >> >>I've got additional info with last panic:
> > >> >>
> > >> >>Unread portion of the kernel message buffer:
> > >> >>HHWWAACCCCMMRR00IInniittCCPPUU ccppuu 01
> > >> >>
> > >> >>HWACCMR0InitCPU failed with rc=-4013
> > >> >>panic: vm_fault: fault on nofault entry, addr: c19ee000
> > >> >>cpuid = 0
> > >> >>Uptime: 28m29s
> > >> >>Physical memory: 2026 MB
> > >> >>Dumping 108 MB: 93 77 61 45 29 13
> > >> >
> > >> > Hi,
> > >> >
> > >> > I can confirm this.
> > >> > When I upgraded to 7.3-PRELEASE and virtualbox-ose 3.1.2
> > >> > I couldn't start ANY virtualbox machine, but immediately (in couple
> >
> > of
> >
> > >> > secs)
> > >> > my system panic.
> > >> >
> > >> > I Upgraded to 8.0-STABLE   and still my machine panics with
> > >>
> > >> virtualbox-ose
> > >>
> > >> > 3.1.2
> > >> >
> > >> > I upgraded to 8.0-STABLE with Virtualbox-ose-devel (3.1.5) and I
> >
> > still
> >
> > >> > have panics.
> > >> >
> > >> > I downgraded port to virtualbox-3.0.51.r22902_3  and still my
> > >> > 8.0-STABLE
> > >> > machine immediatelly panics.
> > >> >
> > >> > Note that in 7.2-STABLE my virtualbox-3.0.51.r22902_3 run without
> > >> > any problem with many months uptime.
> > >> >
> > >> > How can I find out what were the changes from 7.2-STABLE to
> > >> > 7.3-PRELEASE
> > >>
> > >> ?
> > >>
> > >> > I have an "AMD Athlon(tm) Processor (1394.08-MHz 686-class CPU)"
> > >> >
> > >> >
> > >> > I always use the VBoxHeadless (no output on screen).
> > >>
> > >> Could you check out 8-stable at a specific date to narrow down what
> >
> > merge
> >
> > >> causes this problems? At home i use 8-stable from about a month ago
> > >> and could not reproduce that so it should have happened in the last
> > >> few weeks.
> > >>
> > >> So if you do not want to test that but only have virtualbox working
> >
> > again
> >
> > >> then try to check out the sources from about a month ago.
> > >>
> > >> Thanks!
> > >
> > > Hi,
> > >
> > > I can check out a previous 8-stable version.
> > > A) If I use the following lines in my cvsup will this be ok? I will
> >
> > check
> >
> > > out
> > > 8-stable of 10th of January 2010 of 01:01:01
> > > ( date=[cc]yy.mm.dd.hh.mm.ss )
> > >
> > > ===
> > >
> > > *default release=cvs tag=RELENG_8
> > > *default date=2010.01.10.01.01.01
> > >
> > > ===
> >
> > Yeah looks good. I have checked my laptop and have:
> >
> > FreeBSD 8.0-STABLE/amd64 #0: Fri Jan  8 09:39:23 CET 2010
> >
> > > B) What CPU do you have? Perhaps my AMD Athlon excibits the same
> >
> > behaviour
> >
> > > like AMD64 ? I see in wiki
> > > "Launching virtual machine on 8.0-BETA2/amd64 instantly panic the
> >
> > system"
> >
> > CPU: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (2194.52-MHz
> > K8-class CPU)
> >
> > The panic mentioned above was already solved before 8.0-RELEASE.
> 
> More on my tests:
> 
> After permorming a number of tests I found out that this strange bug was
> fixed somehow during the last days. I have checked until
> 2010.02.07.01.01.01 (7th of February 2010) and there was no panic.
> I then checked latest CVSUP (14th February 2010) and the panic had
> dissapeared. Thus, I can conclude that a fix was made to address this
>  problem and now I have:
> 
> virtualbox-ose-vnc   (3.1.2) execute succesfully on my 8.0-STABLE (with
> cvsup 14th February 2010).
> 
> My tests were performed by compiling the kernel and virtualbox kernel
>  module.
> 
> Because, all is normal now I will not continue the task to locate exactly
>  what went wrong during that period.
> 
> Thanks for the help,
> 
> 
> BB

Hi there,
I've got the same problem with my Athlon xp barton and 2Gb of ram, FreeBSD 8 
Stable and ZFS
I updated src with cvsup 17th February 2010, but my system panics again.
Tomorrow, I'll try to go back at 8th January 2010.
Any suggestions are welcome
Thans in advance
Enrico M.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201002202126.52609.enrico>