Date: Tue, 28 May 2013 11:54:45 +0100 From: Tom Evans <tevans.uk@googlemail.com> To: "Zane C. B-H." <vvelox@vvelox.net> Cc: freebsd-x11@freebsd.org Subject: Re: forcing a specific resolution with the nVidia driver Message-ID: <CAFHbX1KSzzawDXONctRQvb6TbzSmiWeDbY=8xBh_R%2BOjDkWDcg@mail.gmail.com> In-Reply-To: <20130526182928.084df236@vixen42> References: <20130526182928.084df236@vixen42>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, May 27, 2013 at 12:29 AM, Zane C. B-H. <vvelox@vvelox.net> wrote: > Any one have any luck forcing a specific resolution as one of the two mon= itor, both the same, does not detect properly because of a IPKVM switch in = the middle. It only detects as supporting up to 1600x1200, when it is reall= y capable of 1920x1080. Below are the two relevant sections from my Xorg co= nfig. > > Any one have any suggestions on what to try next? > > =E2=80=A6 > > # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz > Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 108= 1 1084 1118 -HSync +Vsync > =E2=80=A6 > Option "MetaModes" "1960x1080_60,1960x1080_60" Have you tried using the same name for the mode? "1920..." vs "1960...." Cheers Tom
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFHbX1KSzzawDXONctRQvb6TbzSmiWeDbY=8xBh_R%2BOjDkWDcg>