Date: Mon, 18 Dec 95 14:07:32 EDT From: M C Wong <mcw@hpato.aus.hp.com> To: mcw@hpato.aus.hp.com (M C Wong) Cc: freebsd-questions@freefall.freebsd.org Subject: Re: [2.1] Hylafax problem when receiving incoming fax Message-ID: <199512180307.AA286436057@relay.hp.com> In-Reply-To: <199512172325.AA092942723@hp.com>; from "M C Wong" at Dec 18, 95 10:25 am
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- > Ok, > Installed the HylaFAX package for 2.1R, and it has no problem sending > fax. But upon receiving fax, I always get the sender's header line (fax > number, date, company etc info) only! But the contents have somehow vanished. > The fax modem is Netcomm E34F using Rockwell chipset, and configured as > Class 2 for fax. > Any ideas ? Ok, the log file detailing the conversation of the session which actually `received' something but nothing else other than the header info, 8-((( Can some HylaFAX guru please offer some help ? Thanks in advance. Dec 18 13:54:32.65: [ 5885]: SESSION BEGIN Dec 18 13:54:32.95: [ 5885]: <-- [3:ATA] Dec 18 13:54:34.45: [ 5885]: --> [3:FAX] Dec 18 13:54:34.50: [ 5885]: ANSWER: FAX CONNECTION Dec 18 13:54:34.50: [ 5885]: RECV FAX: begin Dec 18 13:54:42.23: [ 5885]: --> [2: ð] Dec 18 13:54:42.23: [ 5885]: --> [29:+FTSI: " +603 904 8201"] Dec 18 13:54:42.25: [ 5885]: REMOTE TSI "+603 904 8201" Dec 18 13:54:42.25: [ 5885]: ACCEPT TSI "+603 904 8201" Dec 18 13:54:42.53: [ 5885]: --> [22:+FDCS: 0,3,0,2,1,0,0,5] Dec 18 13:54:42.53: [ 5885]: REMOTE wants 9600 bit/s Dec 18 13:54:42.53: [ 5885]: REMOTE wants page width 1728 pixels in 215 mm Dec 18 13:54:42.53: [ 5885]: REMOTE wants unlimited page length Dec 18 13:54:42.53: [ 5885]: REMOTE wants 3.85 line/mm Dec 18 13:54:42.53: [ 5885]: REMOTE wants 2-D MR Dec 18 13:54:42.64: [ 5885]: --> [2:OK] Dec 18 13:54:42.64: [ 5885]: <-- [6:AT+FDR] Dec 18 13:54:44.26: [ 5885]: --> [5:+FCFR] Dec 18 13:54:46.43: [ 5885]: --> [22:+FDCS: 0,3,0,2,1,0,0,5] Dec 18 13:54:46.43: [ 5885]: REMOTE wants 9600 bit/s Dec 18 13:54:46.43: [ 5885]: REMOTE wants page width 1728 pixels in 215 mm Dec 18 13:54:46.43: [ 5885]: REMOTE wants unlimited page length Dec 18 13:54:46.43: [ 5885]: REMOTE wants 3.85 line/mm Dec 18 13:54:46.43: [ 5885]: REMOTE wants 2-D MR Dec 18 13:54:46.43: [ 5885]: --> [7:CONNECT] Dec 18 13:54:46.43: [ 5885]: RECV: begin page Dec 18 13:54:46.44: [ 5885]: RECV: send trigger 021 Dec 18 13:54:46.44: [ 5885]: <-- data [1] Dec 18 13:55:12.16: [ 5885]: RECV: 1519 bytes of data, 26 total lines Dec 18 13:55:12.16: [ 5885]: RECV: 0 bad lines 0 consecutive bad lines Dec 18 13:55:12.16: [ 5885]: --> [9:+FPTS: 1,] Dec 18 13:55:12.62: [ 5885]: --> [7:+FET: 0] Dec 18 13:55:12.62: [ 5885]: RECV recv MPS (more pages, same document) Dec 18 13:55:12.73: [ 5885]: --> [2:OK] Dec 18 13:55:12.73: [ 5885]: RECV send MCF (message confirmation) Dec 18 13:55:12.73: [ 5885]: <-- [6:AT+FDR] Dec 18 13:55:15.07: [ 5885]: --> [7:CONNECT] Dec 18 13:55:15.07: [ 5885]: RECV: begin page Dec 18 13:55:15.07: [ 5885]: RECV: send trigger 021 Dec 18 13:55:15.07: [ 5885]: <-- data [1] Dec 18 13:55:45.12: [ 5885]: RECV: 0 bad lines 0 consecutive bad lines Dec 18 13:55:45.12: [ 5885]: --> [9:+FPTS: 1,] Dec 18 13:55:45.57: [ 5885]: --> [7:+FET: 2] Dec 18 13:55:45.57: [ 5885]: RECV recv EOP (no more pages or documents) Dec 18 13:55:45.69: [ 5885]: --> [2:OK] Dec 18 13:55:45.69: [ 5885]: RECV send MCF (message confirmation) Dec 18 13:55:45.69: [ 5885]: <-- [6:AT+FDR] Dec 18 13:55:49.02: [ 5885]: --> [8:+FHNG: 0] Dec 18 13:55:49.02: [ 5885]: REMOTE HANGUP: Normal and proper end of connection (code 0) Dec 18 13:55:49.02: [ 5885]: RECV: recvq/fax005885 from +603 904 8201, 2 A4 pages, 98 dpi, 2-D MR, 1:03 at 9600 bps Dec 18 13:55:51.23: [ 5885]: RECV FAX: end Dec 18 13:55:51.23: [ 5885]: SESSION END - -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ M.C Wong Email: mcw@hpato.aus.hp.com Australian Telecom Operation Voice: +61 3 9210 5568 Hewlett-Packard Australia Ltd Fax: +61 3 9210 5550 P.O. Box 221, Blackburn 3130, Australia OS: FreeBSD-1.1.5.1 http://www-ato.aus.hp.com/~mcw -----BEGIN PGP SIGNATURE----- Version: 2.6.2i iQCVAwUBMNTa4UmThh0X7Um5AQEutgQAkVImSgw6f2r6t05DYVlgpjNi8QKFKoqf +Y+KAfbTEZcBR0mEGfDvG/sDHbNWk8X8/4juhI+Ydr5AvWMIDPLYG8XwValbqI8g iYQZlQeA4Z5vf6gMUu+zWnKBCOd/AsKJOGPxv3TYF9fSc3Zlj5SPT/+ZDGwGyihE k9z3toNt1iQ= =lLa5 -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199512180307.AA286436057>