Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 14 Jun 2002 23:34:02 -0500
From:      "David W. Chapman Jr." <dwcjr@inethouston.net>
To:        mobile@freebsd.org, current@freebsd.org
Subject:   ACPI errors on laptop running latest -current
Message-ID:  <20020615043402.GA2973@leviathan.inethouston.net>

next in thread | raw e-mail | index | archive | help

--4Ckj6UjgE2iN1+kY
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

When I boot up my gateway solo 2550, I get the following errors

    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR

I've attached my dmesg.  I also think there is a problem with acpi 
detecting the battery properly.  IF anyone has any ideas I'd 
appreciate it.

hw.acpi.acline: 0
hw.acpi.battery.life: 0
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5


-- 
David W. Chapman Jr.
dwcjr@inethouston.net	Raintree Network Services, Inc. <www.inethouston.net>
dwcjr@freebsd.org	FreeBSD Committer <www.FreeBSD.org>

--4Ckj6UjgE2iN1+kY
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Wed Jun 12 22:44:45 CDT 2002
    root@:/usr/obj/usr/src/sys/DWCJR
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03e9000.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc03e90a8.
Preloaded elf module "/boot/kernel/random.ko" at 0xc03e9150.
Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc03e91fc.
Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc03e92a8.
Preloaded elf module "/boot/kernel/snp.ko" at 0xc03e9354.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03e93fc.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 647189041 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 167706624 (163776K bytes)
avail memory = 158613504 (154896K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 15 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1000-0x100f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pccbb0: <TI1225 PCI-CardBus Bridge> irq 10 at device 10.0 on pci0
cardbus0: <CardBus bus> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <TI1225 PCI-CardBus Bridge> irq 10 at device 10.1 on pci0
cardbus1: <CardBus bus> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
pci0: <multimedia, audio> at device 14.0 (no driver attached)
pci0: <simple comms> at device 16.0 (no driver attached)
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pmtimer0 on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
cardbus1: Expecting link target, got 0x22
cardbus1: Resource not specified in CIS: id=10, size=100
cardbus1: Resource not specified in CIS: id=14, size=200
rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem 0x84002000-0x840021ff irq 10 at device 0.0 on cardbus1
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:50:22:00:23:f5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ad0: 9590MB <FUJITSU MHM2100AT> [19485/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2202> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1305: *** Error: Method execution failed, AE_ERROR
WARNING: /tmp was not properly dismounted
/tmp: lost blocks 0 files 1
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: superblock summary recomputed
VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc00c8cff (c0008cff)
VESA: Silicon Motion SM710 VGA BIOS
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 5 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6

--4Ckj6UjgE2iN1+kY--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020615043402.GA2973>