Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 5 Mar 2014 10:56:59 -0800
From:      <dteske@FreeBSD.org>
To:        "'aurfalien'" <aurfalien@gmail.com>, "'FreeBSD Mailing List'" <freebsd-questions@freebsd.org>
Cc:        'Devin Teske' <dteske@freebsd.org>
Subject:   RE: mdconfig via rc.conf
Message-ID:  <18af01cf38a4$b278b1c0$176a1540$@FreeBSD.org>
In-Reply-To: <A2D8BD58-D9D8-4E16-B84D-25D37E195ADE@gmail.com>
References:  <A2D8BD58-D9D8-4E16-B84D-25D37E195ADE@gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help


> -----Original Message-----
> From: aurfalien [mailto:aurfalien@gmail.com]
> Sent: Tuesday, March 4, 2014 2:14 PM
> To: FreeBSD Mailing List
> Subject: mdconfig via rc.conf
> 
> Hi,
> 
> Are there any other parameters I would need to setup a ram disk at boot
time?
> 
> I have this in my rc.conf;
> 
> mdconfig_md100="-t malloc -s 12G"
> 
> I've opted not to mount or format it for now.
> 
> But upon boot, I do not see the md100 device.
> 
> Is there anything I need in rc.conf to enable this?
> 
> Thanks in advance,
> 
> - aurf
> 
[Devin Teske] 

Sorry for late reply. But here's what you want...

# In /etc/rc.conf
mdconfig_md0="-t malloc -s 12G"

# In /etc/fstab
/dev/md0 /mymountpoint ufs rw,noatime 0 0

You see... /etc/rc.d/mdconfig will perform "mount -d /dev/md0" to see
if there is a mountpoint configured for md0 in /etc/fstab.

If "mount -d /dev/md0" reports that there is no entry for md0, then the
/etc/rc.d/mdconfig script will not mount your device.

Also, as others have mentioned, you can not (currently) arbitrarily have
gaps in the numbering system. You have to start with md0 and then use
md1, md2, ad nauseum. The script /etc/rc.d/mdconfig currently stops at
the first undefined value. So in the case of not setting md0 but only a
single md100, nothing will be done (0 being undefined terminates the
loop).
-- 
Devin

_____________
The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?18af01cf38a4$b278b1c0$176a1540$>