Date: Mon, 3 Jul 2000 14:32:01 EDT From: MadBeing@aol.com To: freebsd-hardware@freebsd.org Subject: Problem with sound on K7V motherboard (/w built in audio) Message-ID: <3a.752d3bb.26923621@aol.com>
next in thread | raw e-mail | index | archive | help
Hi,
I've been attempting to get the sound working on a K7V motherboard and have
had
little luck. I've enabled the chip in the bios using the default soundblaster
address/values. According to the boot probes it seems to be finding the
hardware but I've had no success at getting any software to talk to the sound
devices. My best guess is that I've either left out a piece of hardware
config
info or I'm missing an entry in /dev I used MAKEDEV to create /dev/pcaudio
and /dev/pcaudioctl. and I get a 'not configured' when I attempt to open the
device.
I would also like to get the midi port working on the board if anyone has the
right incantations (but that's a lower priority).
Anyway, here's the slice from my config file (4.0-release - I haven't had a
chance to upgrade to -stable yet)
Hints are appreciated.
Thanks,
Dan Smith
Slice from my config
[...]
device pcm
device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
[...]
And the output of dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #1: Sun Jul 2 19:17:49 CDT 2000
dansmith@kickapoo.comm-x.net:/usr/src/sys/compile/kickapoo
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (650.03-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x621 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 268419072 (262128K bytes)
config> q
avail memory = 257167360 (251140K bytes)
Preloaded elf kernel "kernel" at 0xc0325000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032509c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA Apollo ATA controller> at 4.1
chip2: <VIA 82C686 AC97 Audio> port 0xb000-0xb003,0xb400-0xb403,0xb800-0xb8ff
irq 15 at device 4.5 on pci0
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xa400-0xa4ff mem
0xe0000000-0xe0000fff irq 14 at device 9.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xa000-0xa03f mem
0xdf000000-0xdf0fffff,0xdf800000-0xdf800fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:90:27:5d:85:43
fxp0: supplying EUI64: 00:90:27:ff:fe:5d:85:43
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sbc0: <Soundblaster Pro> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
pcm0: <SB DSP 3.02> on sbc0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <PIONEER DVD-ROM DVD-303 1.09> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 8)
cd0: cd present [252480 x 2048 byte records]
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
fxp0: starting DAD for fe80:0001::0290:27ff:fe5d:8543
fxp0: DAD complete for fe80:0001::0290:27ff:fe5d:8543 - no duplicates found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3a.752d3bb.26923621>