Date: Tue, 24 Jul 2001 00:44:59 +0000 (GMT) From: Sperber <sperber@w3.brgkepler.asn-graz.ac.at> To: <questions@freebsd.org> Subject: dmesg error Message-ID: <20010724004300.N354-100000@www.omega-project.net>
next in thread | raw e-mail | index | archive | help
Hi!
someone an idea what
> unknown: <PNP0303> can't assign resources <
means?
attached is my dmesg...
<-- dmesg -->
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Mon Jul 23 12:10:51 GMT 2001
sperber@www.omega-project.net:/usr/src/sys/compile/OMEGA
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1202.13-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 805240832 (786368K bytes)
avail memory = 778711040 (760460K bytes)
Preloaded elf kernel "kernel" at 0xc0477000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc047709c.
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc03ed5a2 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 5
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.08, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhid0: THRUSTMASTER Top Gun Afterburner, rev 1.10/1.00, addr 3, iclass 3/0
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
bktr0: <BrookTree 878> mem 0xdd003000-0xdd003fff irq 10 at device 14.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 61314 B1M
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 14.1 irq 10
sym0: <810a> port 0xdc00-0xdcff mem 0xdd001000-0xdd0010ff irq 11 at device 15.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 9 at device 16.0 on pci0
isic0: <AVM Fritz!Card PCI> port 0xe800-0xe81f mem 0xdd002000-0xdd00201f irq 5 at device 17.0 on pci0
isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xec00-0xec1f irq 10 at device 18.0 on pci0
ed0: address 48:54:e8:29:89:8c, type NE2000 (16 bit)
orm0: <Option ROM> at iomem 0xc0000-0xcb7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
IPv6 packet filtering initialized, logging limited to 100 packets/entry
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4b: ISDN call control device attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
i4brbch: 4 raw B channel access device(s) attached
IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled
ad0: 3445MB <IBM-DCAA-33610> [7000/16/63] at ata0-master WDMA2
ad1: 24405MB <IBM-DJNA-352500> [49585/16/63] at ata0-slave UDMA66
ad2: 514MB <Maxtor 7540 AV> [1046/16/63] at ata1-master PIO3
acd0: CDROM <ASUS CD-S500/A> at ata1-slave using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad1s1a
cd0 at sym0 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
i4b: unit 0, assigned TEI = 112 = 0x70
<-- -->
----------------------------* signature *-----------------------------
| _ |
| ~\\_ |
| \\\\ |
| ... .--. . .-. -... . .-. `\\\\\ |
| |\\\\\ |
| \\\\\|__.--~~\ |
| _--~ / |
| /~ ////// _-~~~~' |
| sperber@w3.brgkepler.asn-graz.ac.at ('-//////-// |
| http://sperber.cjb.net //////(((-) |
| /////" |
| _///" |
| ~ |
----------------------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010724004300.N354-100000>