Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 17 Jan 2007 11:20:13 +0100
From:      Michele Heurs <michele.heurs@aei.mpg.de>
To:        freebsd-mobile@freebsd.org, freebsd-stable@freebsd.org
Subject:   still ACPI problems on HP Compaq nx6325
Message-ID:  <45ADF85D.1030402@aei.mpg.de>

next in thread | raw e-mail | index | archive | help
Hi,

in my previous mail (message ID <4517A8A1.50006@aei.mpg.de> ) I 
described problems with ACPI on my HP Compaq nx6325 with freeBSD 6.1 
release.

Meanwhile I have freeBSD 6.2 stable (of yesterday), but ACPI still 
doesn't work. Booting with ACPI enabled results in the the system being 
unresponsive, the mouse is "jumpy" and input is only recognised after 
long delays or when the mouse is moved.

I have attached the resulting bootlog at the end of this mail.

Do you need any other information? Please let me know. Any help is 
muchly appreciated :) Thanks!
Bye,
    Michèle

bootlog:

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #2: Tue Jan 16 17:27:28 CET 2007
     root@:/usr/obj/usr/src/sys/DRACO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-52 (1596.01-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
   AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
   Cores per package: 2
real memory  = 939327488 (895 MB)
avail memory = 896876544 (855 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 4.0 on pci0
pci16: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 5.0 on pci0
pci32: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 6.0 on pci0
pci48: <PCI bus> on pcib4
pci48: <network> at device 0.0 (no driver attached)
atapci0: <ATI IXP400 SATA150 controller> port 
0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x7018-0x701b,0x7020-0x702f 
mem 0xd4409000-0xd44091ff irq 10 at device 18.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ohci0: <ATI SB400 USB Controller> mem 0xd4401000-0xd4401fff irq 11 at 
device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xd4402000-0xd4402fff irq 11 at 
device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xd4403000-0xd4403fff irq 11 
at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP400 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7040-0x704f irq 10 at device 20.1 
on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <PCI-PCI bridge> at device 20.4 on pci0
pci2: <PCI bus> on pcib5
bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem 0xd4000000-0xd400ffff 
irq 10 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: Ethernet address: 00:15:60:c9:ca:4a
cbb0: <PCI-CardBus Bridge> mem 0xd4010000-0xd4010fff irq 10 at device 
4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 
0xd4011000-0xd40117ff,0xd4014000-0xd4017fff irq 10 at device 4.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:99:29:9d:25:0c
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:9d:25:0c
fwe0: Ethernet address: 02:02:3f:9d:25:0c
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci2: <mass storage> at device 4.2 (no driver attached)
pci2: <base peripheral> at device 4.3 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: cannot reserve I/O port range
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2
Timecounter "TSC" frequency 1596007602 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <PIONEER DVDRW DVR-K16/1.15> at ata0-master PIO4
ad4: 95396MB <FUJITSU MHV2100BH 892C> at ata2-master SATA150
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVDRW   DVR-K16 1.15> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s3a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
stray irq7
stray irq7
stray irq7
too many stray irq 7's: not logging anymore
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...17 4 5 2 1 0 0 done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #2: Tue Jan 16 17:27:28 CET 2007
     root@:/usr/obj/usr/src/sys/DRACO
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff807d5000.
Calibrating clock(s) ... i8254 clock: 1193175 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1596011806 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-52 (1596.01-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
   AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
HTT bit cleared - FreeBSD does not have licensing issues requiring it.

   Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way 
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 939327488 (895 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x00000000008d2000 - 0x0000000036549fff, 902266880 bytes (220280 pages)
avail memory = 896831488 (855 MB)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <HP     0944    >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 21
ioapic0: intpin 9 disabled
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
      ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HP 0944> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80009020
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=59501002)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 1 dev 5 func 0
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 48
acpi0: [MPSAFE]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 2 dev 4 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 18 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 20 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
unknown: I/O range not supported
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  10 11
   Validation          0  255   N     0  10 11
   After Disable       0  255   N     0  10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  10 11
   Validation          0  255   N     0  10 11
   After Disable       0  255   N     0  10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  10 11
   Validation          0  255   N     0  10 11
   After Disable       0  255   N     0  10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  10 11
   Validation          0  255   N     0  10 11
   After Disable       0  255   N     0  10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  10 11
   Validation          0  255   N     0  10 11
   After Disable       0  255   N     0  10 11
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  9
   Validation          0  255   N     0  9
   After Disable       0  255   N     0  9
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  10 11
   Validation          0  255   N     0  10 11
   After Disable       0  255   N     0  10 11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   10   N     0  10 11
   Validation          0   10   N     0  10 11
   After Disable       0  255   N     0  10 11
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x8010
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x1002, dev=0x5950, revid=0x10
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x5a3f, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x5a36, revid=0x00
	bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x1002, dev=0x5a37, revid=0x00
	bus=0, slot=5, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x1002, dev=0x5a38, revid=0x00
	bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x1002, dev=0x4379, revid=0x80
	bus=0, slot=18, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message
	map[10]: type 4, range 32, base 00009000, size  3, enabled
	map[14]: type 4, range 32, base 00009008, size  2, enabled
	map[18]: type 4, range 32, base 00009010, size  3, enabled
	map[1c]: type 4, range 32, base 00007018, size  2, enabled
	map[20]: type 4, range 32, base 00007020, size  4, enabled
	map[24]: type 1, range 32, base d4409000, size  9, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x4374, revid=0x80
	bus=0, slot=19, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	MSI supports 1 message
	map[10]: type 1, range 32, base d4401000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4375, revid=0x80
	bus=0, slot=19, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	MSI supports 1 message
	map[10]: type 1, range 32, base d4402000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4373, revid=0x80
	bus=0, slot=19, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message
	map[10]: type 1, range 32, base d4403000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4372, revid=0x81
	bus=0, slot=20, func=0
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00008200, size  4, enabled
	map[14]: type 1, range 32, base d4404000, size 10, enabled
found->	vendor=0x1002, dev=0x4376, revid=0x80
	bus=0, slot=20, func=1
	class=01-01-82, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	MSI supports 1 message
	map[20]: type 4, range 32, base 00007040, size  4, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x437b, revid=0x01
	bus=0, slot=20, func=2
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 64, base d4408000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x4377, revid=0x80
	bus=0, slot=20, func=3
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4371, revid=0x80
	bus=0, slot=20, func=4
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x6000-0x6fff
pcib1:   memory decode     0xd4300000-0xd43fffff
pcib1:   prefetched decode 0xc0000000-0xc7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1002, dev=0x5975, revid=0x00
	bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0207, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base c0000000, size 27, enabled
pcib1: requested memory range 0xc0000000-0xc7ffffff: good
	map[14]: type 4, range 32, base 00006000, size  8, enabled
pcib1: requested I/O range 0x6000-0x60ff: in range
	map[18]: type 1, range 32, base d4300000, size 16, enabled
pcib1: requested memory range 0xd4300000-0xd430ffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 17
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib2:   secondary bus     16
pcib2:   subordinate bus   16
pcib2:   I/O decode        0x4000-0x5fff
pcib2:   memory decode     0xd0000000-0xd3ffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.C074.C220 - 
AE_NOT_FOUND
pci16: <ACPI PCI bus> on pcib2
pci16: physical bus=16
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pcib3:   secondary bus     32
pcib3:   subordinate bus   32
pcib3:   I/O decode        0x2000-0x3fff
pcib3:   memory decode     0xcc000000-0xcfffffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pcib3: could not get PCI interrupt routing table for \\_SB_.C074.C229 - 
AE_NOT_FOUND
pci32: <ACPI PCI bus> on pcib3
pci32: physical bus=32
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib4:   secondary bus     48
pcib4:   subordinate bus   48
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xc8000000-0xc80fffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pcib4: could not get PCI interrupt routing table for \\_SB_.C074.C22B - 
AE_NOT_FOUND
pci48: <ACPI PCI bus> on pcib4
pci48: physical bus=48
found->	vendor=0x14e4, dev=0x4312, revid=0x01
	bus=48, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message
	map[10]: type 1, range 32, base c8000000, size 14, enabled
pcib4: requested memory range 0xc8000000-0xc8003fff: good
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
pcib4: slot 0 INTA is routed to irq 18
pci48: <network> at device 0.0 (no driver attached)
atapci0: <ATI IXP400 SATA150 controller> port 
0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x7018-0x701b,0x7020-0x702f 
mem 0xd4409000-0xd44091ff irq 16 at device 18.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x7020
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
atapci0: [MPSAFE]
atapci0: Reserved 0x200 bytes for rid 0x24 type 3 at 0xd4409000
ata2: <ATA channel 0> on atapci0
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ohci0: <ATI SB400 USB Controller> mem 0xd4401000-0xd4401fff irq 19 at 
device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd4401000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xd4402000-0xd4402fff irq 19 at 
device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd4402000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xd4403000-0xd4403fff irq 19 
at device 19.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd4403000
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP400 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7040-0x704f irq 16 at device 20.1 
on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x7040
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib5:   secondary bus     2
pcib5:   subordinate bus   3
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xd4000000-0xd42fffff
pcib5:   prefetched decode 0xfff00000-0xfffff
pcib5:   Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib5
pci2: physical bus=2
found->	vendor=0x14e4, dev=0x169c, revid=0x03
	bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type 1, range 32, base d4000000, size 16, enabled
pcib5: requested memory range 0xd4000000-0xd400ffff: good
pcib5: matched entry for 2.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 23
found->	vendor=0x104c, dev=0x8039, revid=0x00
	bus=2, slot=4, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d4010000, size 12, enabled
pcib5: requested memory range 0xd4010000-0xd4010fff: good
pcib5: matched entry for 2.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 20
found->	vendor=0x104c, dev=0x803a, revid=0x00
	bus=2, slot=4, func=1
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d4011000, size 11, enabled
pcib5: requested memory range 0xd4011000-0xd40117ff: good
	map[14]: type 1, range 32, base d4014000, size 14, enabled
pcib5: requested memory range 0xd4014000-0xd4017fff: good
pcib5: matched entry for 2.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 20
found->	vendor=0x104c, dev=0x803b, revid=0x00
	bus=2, slot=4, func=2
	class=01-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d4018000, size 12, enabled
pcib5: requested memory range 0xd4018000-0xd4018fff: good
pcib5: matched entry for 2.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 20
found->	vendor=0x104c, dev=0x803c, revid=0x00
	bus=2, slot=4, func=3
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d4019000, size  8, enabled
pcib5: requested memory range 0xd4019000-0xd40190ff: good
pcib5: matched entry for 2.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 20
bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem 0xd4000000-0xd400ffff 
irq 23 at device 1.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd4000000
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:15:60:c9:ca:4a
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
bge0: [MPSAFE]
cbb0: <PCI-CardBus Bridge> mem 0xd4010000-0xd4010fff irq 20 at device 
4.0 on pci2
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd4010000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
   0x00: 0x8039104c 0x02100007 0x06070000 0x00824010
   0x10: 0xd4010000 0x020000a0 0x20030302 0xfffff000
   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
   0x30: 0x00000000 0xfffffffc 0x00000000 0x07440114
   0x40: 0x30b0103c 0x00000001 0x00000000 0x00000000
   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
   0x80: 0x18401060 0x02830203 0x00070010 0x01a11002
   0x90: 0x406402c0 0x00000000 0x00000000 0x00000000
   0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
   0xf0: 0x8551322b 0x25001506 0x00000000 0x00000000
fwohci0: vendor=104c, dev=803a
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> mem 
0xd4011000-0xd40117ff,0xd4014000-0xd4017fff irq 20 at device 4.1 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd4011000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:99:29:9d:25:0c
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:9d:25:0c
fwe0: bpf attached
fwe0: Ethernet address: 02:02:3f:9d:25:0c
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci2: <mass storage> at device 4.2 (no driver attached)
pci2: <base peripheral> at device 4.3 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ppc0: using extended I/O port range
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <ECP parallel printer port> port 0-0x7,0x400-0x402 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2
Device configuration finished.
linprocfs registered
procfs registered
lapic: Divisor 2, Frequency 99750454 hz
Timecounter "TSC" frequency 1596011806 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_tz0: _AC3: temperature 65.0 >= setpoint 15.9
acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
acpi_tz0: _AC1: temperature 65.0 >= setpoint 60.0
acpi_tz0: switched from NONE to _AC1: 65.0C
battery0: battery initialization start
acpi_tz0: _AC3: temperature 65.0 >= setpoint 15.9
acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
acpi_tz0: _AC3: temperature 65.0 >= setpoint 15.9
acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
battery1: battery initialization start
battery0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=80 wire
acd0: setting PIO4 on IXP400 chip
acd0: <PIONEER DVDRW DVR-K16/1.15> DVDR drive at ata0 as master
acd0: read 4133KB/s (4133KB/s) write 4133KB/s (4133KB/s), 2000KB buffer, 
PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 95396MB <FUJITSU MHV2100BH 892C> at ata2-master SATA150
ad4: 195371568 sectors [206742C/15H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Silicon Image check3 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
(probe7:ata0:0:0:0): error 22
(probe7:ata0:0:0:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at ata0 bus 0 target 0 lun 0
pass0: <PIONEER DVDRW   DVR-K16 1.15> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
GEOM: new disk cd0
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
      ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVDRW   DVR-K16 1.15> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad4s3a
start_init: trying /sbin/init
acpi_tz0: _AC3: temperature 59.0 >= setpoint 15.9
acpi_tz0: _AC2: temperature 59.0 >= setpoint 50.0
acpi_tz0: switched from _AC1 to _AC2: 59.0C
acpi_tz0: _AC3: temperature 59.0 >= setpoint 15.9
acpi_tz0: _AC3: temperature 59.0 >= setpoint 15.9






-- 
**********************************************
Dr. Michèle Heurs
Max-Planck-Institut für Gravitationsphysik
(Albert-Einstein-Institut)
Callinstr. 38
30167 Hannover
Germany

Tel.: +49 (0)511 - 762 - 5845
Fax:  +49 (0)511 - 762 - 2784
Web: http://www.aei.mpg.de
**********************************************




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45ADF85D.1030402>