Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 9 Dec 2005 01:15:22 +0100
From:      greg byshenk <gbyshenk@byshenk.demon.nl>
To:        freebsd-stable@freebsd.org
Cc:        Jason Harmening <jason.harmening@gmail.com>
Subject:   Re: [FreeBSD 6.0-RELEASE] Incorrect geometry for VIA RAID0 array
Message-ID:  <200512090015.jB90FMEA084040@byshenk.demon.nl>
In-Reply-To: <dn7nuo$2agc$1@FreeBSD.csie.nctu.edu.tw>
References:  <dn7nuo$2agc$1@FreeBSD.csie.nctu.edu.tw>

next in thread | previous in thread | raw e-mail | index | archive | help
On freebsd-stable, jason.harmening@gmail.com (Jason Harmening) wrote:

>  Here's the dmesg output from the installer:

>  ad4: 70911MB <WDC WD740GD-00FLA1 27.08D27> at ata2-master SATA150
>  ad6: 70911MB <WDC WD740GD-00FLC0 33.08F33> at ata3-master SATA150
>  ar0: 70911MB <VIA Tech V-RAID RAID0 (stripe 64 KB)> status: READY
>  ar0: disk0 READY using ad4 at ata2-master
>  ar0: disk1 READY using ad6 at ata3-master

Are you _sure_ that the array is being recognized properly?

Based on the dmesg output, it looks like the controller is being read
as a 74G drive.

FWIW, this is the section of my dmesg output, for a _mirror_:

   ad4: 78167MB <Maxtor 6Y080P0 YAR41BW0> at ata2-master UDMA133
   ad6: 78167MB <Maxtor 6Y080P0 YAR41BW0> at ata3-master UDMA133
   ar0: 77247MB <Promise Fasttrak RAID1> status: READY
   ar0: disk0 READY (master) using ad4 at ata2-master
   ar0: disk1 READY (mirror) using ad6 at ata3-master


>  On 12/7/05, Jason Harmening <jason.harmening@gmail.com> wrote:

> > I'm trying to install FreeBSD 6.0-RELEASE on a RAID0 array attached to the
> > VIA 8237 controller on my Asus A8V Deluxe motherboard.  The array consists
> > of two 74G drives.  The installer recognizes the array as ar0, but when I
> > enter FDISK to set up my partition, the size of the array is only recognized
> > as 74G, rather than the true 148G.  I've double-checked all my BIOS
> > settings, and nothing seems out of order.  Please help!


-- 
greg byshenk  -  gbyshenk@byshenk.net  -  Leiden, NL



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200512090015.jB90FMEA084040>