Date: Mon, 24 Jun 2002 12:18:01 +0200 From: Juan Francisco Rodriguez Hervella <jrh@it.uc3m.es> To: johann@broadpark.no Cc: questions@FreeBSD.ORG Subject: Re: IPv6 on ADSL -- conflicts with onlamp.com article (IPv6, Meet FreeBSD) Message-ID: <3D16F1D9.D0BE495F@it.uc3m.es> References: <1024829192.3d15a70850446@mail.broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
johann@broadpark.no wrote: > Hi. > > I am having some problems setting up IPv6 on my network: > > [1] > I've added this to my g/w kernel: > options IPFIREWALL # Firewall > options IPFIREWALL_VERBOSE # Enable logging to > syslogd(8) > options IPFIREWALL_VERBOSE_LIMIT=100 # Limit verbosity > options IPV6FIREWALL # Firewall for IPv6 > options IPV6FIREWALL_VERBOSE > options IPV6FIREWALL_VERBOSE_LIMIT=100 > > And this to rc.conf: > firewall_enable="YES" > firewall_type="OPEN" > ipv6_firewall_enable="YES" > ipv6_firewall_type="OPEN" > > Yet, I get: > IPv6 packet filtering initialized, logging limited to 100 packets/entry > IP packet filtering initialized, divert enabled, rule-based forwarding > disabled, default to deny, logging limited to 100 packets/entry by default > > Note the `default to deny' -- where does that come from. After I added all > these settings not even my NFS will work. > > [2] > In O'Reilly's IPv6 article > (http://www.onlamp.com/lpt/a//bsd/2002/02/22/ipv6.html) in the `Configuring > Your Gateway Machine' section it describes the rtadvd configuration. On my > g/w I have two interfaces; lnc0 (10.0.0.2, and this address *has* to be > 10.0.0.2 for it to properly connect to my Cisco ADSL modem) and ep0 > (192.168.187.2, connected to my w/s). Excactly what interfaces am I going All your addresses are private ? > to add to /etc/rtadvd.conf? > > [3] > I have registered with Freenet6, and as far as I understand, tspc connects > to it. Both ping6 and traceroute6 doesn't work, but I believe this is > because of the rtadvd. Now, *what* is my IPv6 address? Freenet6 hasn't told > me. dmesg hasn't told me. Who will? > I suggest you to use "6to4" instead of tunnel brokers. I dont remember but I think that there is a "6to4" script for OpenBSD, written in Perl. Try it on. > > [4] > Once I find out what my address is, how will I set up my subnet so it may > work as my IPv4 one does? Will it be an internal subnet or an external > subnet? > > This is all a mess. That article is meant for you guys and not me. Should > it really be like that? > > Thanks. > > -- Johann > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D16F1D9.D0BE495F>