Date: Mon, 30 Apr 2001 10:12:14 -0600 From: "Kenneth D. Merry" <ken@kdm.org> To: Tomi Vainio - Sun Finland - <Tomi.Vainio@Sun.COM> Cc: freebsd-current@FreeBSD.ORG Subject: Re: camcontrol stop / restart broken Message-ID: <20010430101214.A46826@panzer.kdm.org> In-Reply-To: <15083.65379.523173.371122@ultrahot.Finland.Sun.COM>; from Tomi.Vainio@Sun.COM on Sun, Apr 29, 2001 at 02:47:47PM %2B0300 References: <15083.9059.887489.356984@ultrahot.Finland.Sun.COM> <20010428224047.A37268@panzer.kdm.org> <15083.65379.523173.371122@ultrahot.Finland.Sun.COM>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Apr 29, 2001 at 14:47:47 +0300, Tomi Vainio - Sun Finland - wrote: > Kenneth D. Merry writes: > > > > Can you do the following: > > > > camcontrol stop da1 > > camcontrol tur da1 -v > > [ then you can start it back up with camcontrol start ] > > > > What I want to see here is the sense information coming back from the drive > > when it is spun down. > > > > The new error recovery code should be doing the same thing as the old error > > recovery code -- sending a start unit. For some reason it isn't doing the > > right thing, though. > > > cat:~(10)# camcontrol stop da1 > Unit stopped successfully > cat:~(11)# camcontrol tur da1 -v > Unit is not ready > (pass1:ahc0:0:2:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (pass1:ahc0:0:2:0): CAM Status: SCSI Status Error > (pass1:ahc0:0:2:0): SCSI Status: Check Condition > (pass1:ahc0:0:2:0): NOT READY asc:4,2 > (pass1:ahc0:0:2:0): Logical unit not ready, initializing cmd. required field replaceable unit: 2 This should be fixed as of rev 1.22 of scsi_all.c. There was an errant search and replace that caused the 'start' bit in the start/stop unit to always be set to 0 (stop). So automatic spinups wouldn't work, and 'camcontrol start' wouldn't work. > Also messages file is full of these: > > Apr 29 00:55:42 cat /boot/kernel/kernel: (noperiph:ahc0:0:2:0): xpt_scan_lun: can't allocate path, can't continue > Apr 29 00:55:43 cat last message repeated 26 times > Apr 29 00:57:43 cat last message repeated 359 times > Apr 29 01:07:43 cat last message repeated 1793 times > Apr 29 01:17:43 cat last message repeated 1794 times > Apr 29 01:27:43 cat last message repeated 1793 times > Apr 29 01:34:13 cat last message repeated 1122 times > Apr 29 01:34:13 cat /boot/kernel/kernel: (noperiph:ahc0:0:2:0): xpt_scan_lun: can't allocate path, can't continue > Apr 29 01:34:13 cat last message repeated 43 times > Apr 29 01:36:02 cat last message repeated 322 times I'd still like to know when these messages are cropping up. Ken -- Kenneth Merry ken@kdm.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010430101214.A46826>