Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 30 Aug 2000 13:20:51 -0700
From:      Steve Carter <scarter@gblx.net>
To:        Bernie Doehner <bad@wireless.net>
Cc:        Steve Carter <scarter@pobox.com>, multimedia@FreeBSD.ORG
Subject:   Re: fxtv help ...
Message-ID:  <20000830132051.A9742@gblx.net>
In-Reply-To: <Pine.BSF.3.95.1000830110954.8595A-100000@wireless.net>; from bad@wireless.net on Wed, Aug 30, 2000 at 11:10:23AM -0700
References:  <20000829222703.A5790@gblx.net> <Pine.BSF.3.95.1000830110954.8595A-100000@wireless.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Yes ... MetroX because I have a dual headed system.

[scarter@evil]$ env | grep DISPLAY
DISPLAY=:0.0
[scarter@evil]$ fxtv
^C

-Steve

* Bernie Doehner <bad@wireless.net> [000830 11:10]:
> What is your enviornmental variable DISPLAY set to?  Are you running X?
> 
> Bernie
> 
> On Tue, 29 Aug 2000, Steve Carter wrote:
> 
> > Machine:	IBM M-Pro IntelliStation
> > OS:		FreeBSD 4.1-STABLE
> > Kernel:		device          bktr
> > Application:	fxtv v1.02
> > Hardware:	Hauppauge WinTV PCI
> > 
> > dmesg output:
> > 
> > bktr0: <BrookTree 878> mem 0xf97fe000-0xf97fefff irq 10 at device 10.0 on pci2
> > bktr0: Hauppauge Model 61291 D110
> > 
> > Problem:
> > 
> > I run fxtv from the unix prompt and nothing happens.  Example:
> > 
> > $ fxtv
> > <hangs until I press ctrl-c>
> > 
> > I try debug and get the output following at the end of the mail.  I use
> > the default  Fxtv file at /etc/X11/app-defaults/Fxtv.
> > 
> > I am at a loss, the card and device drivers seem to startup correctly and
> > the debug output seems consistant.  I can't determine anything from the
> > documentation.  Anyone got any ideas?  I am probably doing something lame,
> > and I'll try not to be too embarrased when someone points that lameness
> > out ...
> > 
> > -Steve
> > 
> > ====
> > 
> > $ fxtv -debug startup
> > Fxtv v1.02
> > 
> > DETECTED CAPTURE CARD(S) [DRIVER PROBES]:
> >     bktr0: <BrookTree 878> mem 0xf97fe000-0xf97fefff irq 10 at device 10.0
> > on pci2
> >     bktr0: Hauppauge Model 61291 D110
> > 
> > SYSCTL MIB VALUES:
> >     kern.version: FreeBSD 4.1-STABLE #0: Mon Aug 28 18:21:09 MST 2000
> >         root@myhostname:/usr/src/sys/compile/EVIL
> >     
> >     hw.bt848.card: -1
> >     hw.bt848.tuner: -1
> >     hw.bt848.reverse_mute: -1
> >     hw.bt848.format: -1
> >     hw.bt848.slow_msp_audio: -1
> > 
> > TUNER SIGNATURE (0x01 - 0xff):
> >     00 00 00 01 00 00 00 00 00 00 01 00 02 00 00 00
> > 
> > TUNER I2C DEVICES FOUND AT:
> >     0x30, 0xa0, 0xc2
> > 
> > CAPTURE CARD EEPROM CONTENTS:
> >    Read 256 EEPROM bytes (0x00 - 0xff)
> >     84 12 00 00 05 50 0e 7f 08 0a 23 6b ef 50 14 91
> >     00 00 00 00 04 84 0a 00 01 01 20 77 00 40 7f 3e
> >     13 00 74 02 01 00 02 79 d7 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70
> >     84 12 00 00 05 50 0e 7f 08 0a 23 6b ef 50 14 91
> >     00 00 00 00 04 84 0a 00 01 01 20 77 00 40 7f 3e
> >     13 00 74 02 01 00 02 79 d7 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >     00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70
> > 
> > SUPPORTED FREQUENCY SETS:
> >      1 nabcst
> >      2 cableirc
> >      3 cablehrc
> >      4 weurope
> >      5 jpnbcst
> >      6 jpncable
> >      7 xussr
> >      8 australia
> >      9 france
> > 
> > Supported RGB Capture Pixel Formats:
> >    bpp  Bpp  RGB Masks                     Swap
> >    ---  ---  ----------------------------  ----
> >     15   2   00007c00, 000003e0, 0000001f  NB  
> >     16   2   0000f800, 000007e0, 0000001f  NB  
> >     24   3   00ff0000, 0000ff00, 000000ff   B  
> >     24   4   00ff0000, 0000ff00, 000000ff  NBWb
> > 
> > Supported YUV Capture Pixel Formats:
> >    YUVSize  HSamp  VSamp  Pack    CompOrder  T->B  L->R  YTrans
> >    -------  -----  -----  ------  ---------  ----  ----  ------
> >     8,8,8   1,2,2  1,1,1  PLANAR  YUV         Y     Y      N
> >     8,8,8   1,2,2  1,1,1  PACKED  YUYV        Y     Y      N
> >     8,8,8   1,2,2  1,2,2  PLANAR  YUV         Y     Y      N
> > 
> > 
> > XSERVER: 'Metro Link Incorporated' v6003,  Protocol Verson 11.0
> >          Screen Res = 1280x1024, DefDepth = 16; NumScreens = 2
> >          Bitmap Unit/BitOrder/Pad = 32/LSBFirst/32, Image ByteOrder = LSBFirst
> > 
> > XF86DGAQueryVersion() succeeded - vers = 1.01
> >    BaseAddr = 0xfa000000, Pitch = 1280, BankSize/RamSize = 16777216/16777216
> > 
> > Rating Available Visuals:
> >    Rating  Class        bpp  Bpp  R,G,B Masks                   Swap  DirectVid
> >    ------  -----------  ---  ---  ----------------------------  ----  ---------
> >      0     DirectColor   16  2,2  0000f800, 000007e0, 0000001f   --   No 
> >      5     TrueColor     16  2,2  0000f800, 000007e0, 0000001f   --   Yes
> > Chosen Visual is 16-bpp TrueColor
> > 
> > XF86VidModeQueryVersion() succeeded - version = 0.08
> > 
> > 
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-multimedia" in the body of the message
> > 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000830132051.A9742>