Date: Wed, 26 Jul 2000 12:33:37 +0200 From: "Miklos Niedermayer" <mico@bsd.hu> To: "Roberto Nunnari, AGIE" <roberto.Nunnari@agie.ch> Cc: Udo Schweigert <ust@cert.siemens.de>, isdn@freebsd.org Subject: Re: AVM Fritz!Card pnp Message-ID: <20000726123337.B379@bsd.hu> In-Reply-To: <397ED22B.535B891B@agie.ch>; from roberto.Nunnari@agie.ch on Wed, Jul 26, 2000 at 12:57:31PM %2B0100 References: <390EB6D8.1089A80A@agie.ch> <20000502122511.A66256@alaska.cert.siemens.de> <390EBD65.2EBDDEFA@agie.ch> <20000502124235.A66656@alaska.cert.siemens.de> <392CF53E.DE8CC0B4@agie.ch> <20000525112228.A53021@alaska.cert.siemens.de> <397C2D82.76A4F9DC@agie.ch> <20000724130727.A94126@alaska.cert.siemens.de> <20000724145702.F314@bsd.hu> <397ED22B.535B891B@agie.ch>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Roberto Nunnari, AGIE: > Jul 26 09:55:45 sunny /kernel: i4b-L3 T303_timeout: SETUP not answered, > cr = 43 > Jul 26 09:55:45 sunny /kernel: i4b-L3 next_l3state: FSM illegal state, > state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout! > Jul 26 09:55:45 sunny /kernel: i4b-L1 timer3_expired: state = F4 > Awaiting Signal > Jul 26 09:55:45 sunny /kernel: i4b-L1 ifpnp_recover: ISAC: ISTA = 0x2e > Jul 26 09:55:45 sunny /kernel: i4b-L1 ifpnp_recover: ISAC: CISQ = 0x3e > Jul 26 09:55:45 sunny /kernel: i4b-L1 ifpnp_recover: ISAC: IMASK = > 0x2a > Jul 26 09:57:37 sunny login: ROOT LOGIN (root) ON ttyv1 > ======================================================= > > As you see the AVM Fritz!Card PnP is recognized and all i4b > drivers are attached. But then something goes wrong. > Does that mean that the card don't receive any signal from > the ISDN BOX? Hmmm, don't know. > network_interfaces="ed0 lo0 tun0" > ifconfig_ed0="inet 192.168.1.1 netmask 255.255.255.0" > ifconfig_tun0="" I don't specify tun0 on my machines. > local-phone-incoming = 0332551018 > remote-phone-incoming = 1055411055 > local-phone-dialout = 0332551018 > remote-phone-dialout = 1055411055 remote-phone-dialout = * > set device /dev/cuaa0 > set log Phase Chat LCP IPCP CCP tun command > set speed 115200 > set redial 10 6 > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK > ATE1Q0M0 OK \\dATX3DT\\T TIMEOUT 40 CONNECT" you don't need set dial Anyway, i also had a similiar problem two times, but don't remember what is the solution. I haven't met those messages at startup. It was some simple setup problem for me. Mico To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000726123337.B379>