Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 5 Jan 2008 17:21:09 +0200 (EET)
From:      Mario Pavlov <freebsd@abv.bg>
To:        freebsd-amd64@freebsd.org
Subject:   Re: ata(4) problem (unable to burn CDs)
Message-ID:  <2036365664.292711.1199546469974.JavaMail.nobody@mail51.abv.bg>

next in thread | raw e-mail | index | archive | help
an important detail that I forgot to mention is that my DVD burner is SATA


 >Hi guys,
 >I'm experiencing problems with my DVD burner. I can't burn CDs.
 >When I start k3b and load some data and start the burning it just never starts writing and I'm getting the fallowing errors in the messages log
 >
 >************************************************************************************************************************
 >Jan  5 09:59:15 e-soul kernel: acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02
 >Jan  5 09:59:15 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >Jan  5 09:59:17 e-soul last message repeated 3 times
 >Jan  5 09:59:19 e-soul kernel: acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >Jan  5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >Jan  5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >Jan  5 10:02:45 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out
 >Jan  5 10:06:17 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out
 >Jan  5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >Jan  5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >************************************************************************************************************************
 >
 >
 >and this is the k3b debug output after I hit cancel
 >
 >
 >************************************************************************************************************************
 >System
 >-----------------------
 >K3b Version: 1.0.4
 >
 >KDE Version: 3.5.8
 >QT Version:  3.3.8
 >Kernel:      7.0-PRERELEASE
 >Devices
 >-----------------------
 >HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/cd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
 >
 >Used versions
 >-----------------------
 >cdrecord: 2.1
 >
 >cdrecord
 >-----------------------
 >/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
 >/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
 >/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
 >scsidev: '4,0,0'
 >scsibus: 4 target: 0 lun: 0
 >SCSI buffer size: 64512
 >/usr/local/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
 >/usr/local/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
 >/usr/local/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
 >Cdrecord-Clone 2.01 (amd64-unknown-freebsd7.0) Copyright (C) 1995-2004 J&#246;rg Schilling
 >TOC Type: 1 = CD-ROM
 >Using libscg version 'schily-0.8'.
 >Driveropts: 'burnfree'
 >atapi: 0
 >Device type    : Removable CD-ROM
 >Version        : 0
 >Response Format: 2
 >Capabilities   : 
 >Vendor_info    : 'HL-DT-ST'
 >Identifikation : 'DVDRAM GSA-H62N '
 >Revision       : 'CL00'
 >Device seems to be: Generic mmc2 DVD-R/DVD-RW.
 >Current: 0x0009
 >Profile: 0x0012 
 >Profile: 0x0011 
 >Profile: 0x0015 
 >Profile: 0x0016 
 >Profile: 0x0014 
 >Profile: 0x0013 
 >Profile: 0x001A 
 >Profile: 0x001B 
 >Profile: 0x002B 
 >Profile: 0x0010 
 >Profile: 0x0009 (current)
 >Profile: 0x000A 
 >Profile: 0x0008 
 >Profile: 0x0002 
 >Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
 >Driver flags   : MMC-3 SWABAUDIO BURNFREE 
 >Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
 >Drive buf size : 1053696 = 1029 KB
 >Drive DMA Speed: 5634 kB/s 32x CD 4x DVD
 >FIFO size      : 4194304 = 4096 KB
 >/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
 >/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
 >/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
 >/usr/local/bin/cdrecord: DMA speed too slow (OK for 26x). Cannot write at speed 48x.
 >Track 01: data   671 MB        
 >Total size:      770 MB (76:22.93) = 343720 sectors
 >Lout start:      771 MB (76:24/70) = 343720 sectors
 >Current Secsize: 2048
 >ATIP info from disk:
 >  Indicated writing power: 4
 >  Is not unrestricted
 >  Is not erasable
 >  Disk sub type: Medium Type A, low Beta category (A-) (2)
 >  ATIP start of lead in:  -12508 (97:15/17)
 >  ATIP start of lead out: 359845 (79:59/70)
 >Disk type:    Short strategy type (Phthalocyanine or similar)
 >Manuf. index: 22
 >Manufacturer: Ritek Co.
 >Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125
 >Starting to write CD/DVD at speed 48 in real SAO mode for single session.
 >Last chance to quit, starting real write in 2 seconds.
 >   1 seconds.
 >   0 seconds. Operation starts.
 >Waiting for reader process to fill input buffer ... input buffer ready.
 >BURN-Free is ON.
 >Performing OPC...
 >Sending CUE sheet...
 >/usr/local/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
 >/usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after 206.695 (200) s
 >CDB:  2A 00 FF FF FF 6A 00 00 1F 00
 >cmd finished after 206.695s timeout 200s
 >/usr/local/bin/cdrecord: Input/output error. read buffer cap: scsi sendcmd: retryable error
 >CDB:  5C 00 00 00 00 00 00 00 0C 00
 >status: 0x2 (CHECK CONDITION)
 >Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 80 29 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >Sense Key: 0x6 Unit Attention, Segment 0
 >Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
 >Sense flags: Blk 0 (not valid) 
 >cmd finished after 5.095s timeout 200s
 >Writing pregap for track 1 at -150
 >write track pad data: error after 0 bytes
 >Starting new track at sector: 0
 >Track 01:    0 of  671 MB written.
 >/usr/local/bin/cdrecord: faio_wait_on_buffer for writer timed out.
 >/usr/local/bin/cdrecord: Caught interrupt.
 >Track 01: data   671 MB        
 >Total size:      770 MB (76:22.93) = 343720 sectors
 >Lout start:      771 MB (76:24/70) = 343720 sectors
 >Current Secsize: 2048
 >ATIP info from disk:
 >  Indicated writing power: 4
 >  Is not unrestricted
 >  Is not erasable
 >  Disk sub type: Medium Type A, low Beta category (A-) (2)
 >  ATIP start of lead in:  -12508 (97:15/17)
 >  ATIP start of lead out: 359845 (79:59/70)
 >Disk type:    Short strategy type (Phthalocyanine or similar)
 >Manuf. index: 22
 >Manufacturer: Ritek Co.
 >Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125
 >Writing  time:  426.405s
 >/usr/local/bin/cdrecord: fifo had 64 puts and 1 gets.
 >/usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
 >
 >cdrecord command:
 >-----------------------
 >/usr/local/bin/cdrecord -v gracetime=2 dev=4,0,0 speed=48 -dao driveropts=burnfree -eject -data -tsize=343720s - 
 >************************************************************************************************************************
 >
 >
 >cdrecord is complaining about permissions but I have this in /etc/devfs.conf
 >
 >
 >************************************************************************************************************************
 >perm cdrom 0666
 >own cdrom root:operator
 >link cd0 cdwriter
 >perm cdwriter 0666
 >own cdwriter root:operator
 >perm pass0 0666
 >own pass0 root:operator
 >perm xpt0 0666
 >own xpt0 root:operator
 >************************************************************************************************************************
 >
 >
 >and also
 >
 >
 >************************************************************************************************************************
 >$ ls -l acd0 cd0 pass0 xpt0
 >crw-rw-rw-  1 root  operator    0, 101 Jan  4 20:59 acd0
 >crw-rw-rw-  1 root  operator    0, 104 Jan  4 20:59 cd0
 >crw-rw-rw-  1 root  operator    0, 100 Jan  4 20:59 pass0
 >crw-rw-rw-  1 root  operator    0,  81 Jan  4 20:59 xpt0
 >************************************************************************************************************************
 >
 >
 >I have atapicam compiled in the kernel
 >I've found similar problem reported in the freebsd-stable mailing list
 >here is the thread http://lists.freebsd.org/pipermail/freebsd-stable/2007-May/035257.html
 >
 >I'm running the latest code from RELENG_7 for amd64
 >
 >
 >************************************************************************************************************************
 >$ uname -a
 >FreeBSD e-soul.org 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #6: Fri Jan  4 12:27:16 EET 2008     root@e-soul.org:/usr/obj/usr/src/sys/Ss  amd64
 >************************************************************************************************************************
 >
 >
 >************************************************************************************************************************
 >$ dmesg
 >Copyright (c) 1992-2008 The FreeBSD Project.
 >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 >        The Regents of the University of California. All rights reserved.
 >FreeBSD is a registered trademark of The FreeBSD Foundation.
 >FreeBSD 7.0-PRERELEASE #6: Fri Jan  4 12:27:16 EET 2008
 >    root@e-soul.org:/usr/obj/usr/src/sys/Ss
 >Timecounter "i8254" frequency 1193182 Hz quality 0
 >CPU: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz (2206.71-MHz K8-class CPU)
 >  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
 >  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >  Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
 >  AMD Features=0x20100800<SYSCALL,NX,LM>
 >  AMD Features2=0x1<LAHF>
 >  Cores per package: 2
 >usable memory = 4285259776 (4086 MB)
 >avail memory  = 4084604928 (3895 MB)
 >ACPI APIC Table: <MSTEST OEMAPIC >
 >FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 > cpu0 (BSP): APIC ID:  0
 > cpu1 (AP): APIC ID:  1
 >ioapic0 <Version 2.0> irqs 0-23 on motherboard
 >kbd1 at kbdmux0
 >acpi0: <MSTEST OEMXSDT> on motherboard
 >acpi0: [ITHREAD]
 >acpi0: Power Button (fixed)
 >acpi0: reservation of 0, a0000 (3) failed
 >acpi0: reservation of 100000, 7ff00000 (3) failed
 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 >acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 >Timecounter "HPET" frequency 14318180 Hz quality 900
 >cpu0: <ACPI CPU> on acpi0
 >ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  EB, should be E6 [20070320]
 >est0: <Enhanced SpeedStep Frequency Control> on cpu0
 >est: CPU supports Enhanced Speedstep, but is not recognized.
 >est: cpu_vendor GenuineIntel, msr b280b2806000b28
 >device_attach: est0 attach returned 6
 >p4tcc0: <CPU Frequency Thermal Control> on cpu0
 >cpu1: <ACPI CPU> on acpi0
 >est1: <Enhanced SpeedStep Frequency Control> on cpu1
 >est: CPU supports Enhanced Speedstep, but is not recognized.
 >est: cpu_vendor GenuineIntel, msr b280b2806000b28
 >device_attach: est1 attach returned 6
 >p4tcc1: <CPU Frequency Thermal Control> on cpu1
 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 >pci0: <ACPI PCI bus> on pcib0
 >pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 >pci1: <ACPI PCI bus> on pcib1
 >vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
 >uhci0: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 16 at device 26.0 on pci0
 >uhci0: [GIANT-LOCKED]
 >uhci0: [ITHREAD]
 >usb0: <UHCI (generic) USB controller> on uhci0
 >usb0: USB revision 1.0
 >uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 >uhub0: 2 ports with 2 removable, self powered
 >uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 17 at device 26.1 on pci0
 >uhci1: [GIANT-LOCKED]
 >uhci1: [ITHREAD]
 >usb1: <UHCI (generic) USB controller> on uhci1
 >usb1: USB revision 1.0
 >uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 >uhub1: 2 ports with 2 removable, self powered
 >ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 18 at device 26.7 on pci0
 >ehci0: [GIANT-LOCKED]
 >ehci0: [ITHREAD]
 >usb2: waiting for BIOS to give up control
 >usb2: EHCI version 1.0
 >usb2: companion controllers, 2 ports each: usb0 usb1
 >usb2: <EHCI (generic) USB 2.0 controller> on ehci0
 >usb2: USB revision 2.0
 >uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
 >uhub2: 4 ports with 4 removable, self powered
 >pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
 >pcm0: [ITHREAD]
 >pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
 >pci4: <ACPI PCI bus> on pcib2
 >pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
 >pci3: <ACPI PCI bus> on pcib3
 >re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3
 >re0: Using 2 MSI messages
 >miibus0: <MII bus> on re0
 >rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
 >rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 >re0: Ethernet address: 00:1d:60:2a:4f:56
 >re0: [FILTER]
 >re0: [FILTER]
 >pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
 >pci2: <ACPI PCI bus> on pcib4
 >atapci0: <JMicron JMB363 SATA300 controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
 >atapci0: [ITHREAD]
 >atapci0: AHCI called from vendor specific driver
 >atapci0: AHCI Version 01.00 controller with 2 ports detected
 >ata2: <ATA channel 0> on atapci0
 >ata2: [ITHREAD]
 >ata3: <ATA channel 1> on atapci0
 >ata3: [ITHREAD]
 >ata4: <ATA channel 2> on atapci0
 >ata4: [ITHREAD]
 >uhci2: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 23 at device 29.0 on pci0
 >uhci2: [GIANT-LOCKED]
 >uhci2: [ITHREAD]
 >usb3: <UHCI (generic) USB controller> on uhci2
 >usb3: USB revision 1.0
 >uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
 >uhub3: 2 ports with 2 removable, self powered
 >uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
 >uhci3: [GIANT-LOCKED]
 >uhci3: [ITHREAD]
 >usb4: <UHCI (generic) USB controller> on uhci3
 >usb4: USB revision 1.0
 >uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
 >uhub4: 2 ports with 2 removable, self powered
 >uhci4: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at device 29.2 on pci0
 >uhci4: [GIANT-LOCKED]
 >uhci4: [ITHREAD]
 >usb5: <UHCI (generic) USB controller> on uhci4
 >usb5: USB revision 1.0
 >uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
 >uhub5: 2 ports with 2 removable, self powered
 >ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0
 >ehci1: [GIANT-LOCKED]
 >ehci1: [ITHREAD]
 >usb6: EHCI version 1.0
 >usb6: companion controllers, 2 ports each: usb3 usb4 usb5
 >usb6: <EHCI (generic) USB 2.0 controller> on ehci1
 >usb6: USB revision 2.0
 >uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
 >uhub6: 6 ports with 6 removable, self powered
 >pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 >pci5: <ACPI PCI bus> on pcib5
 >dc0: <Davicom DM9102A 10/100BaseTX> port 0xb800-0xb8ff mem 0xfeaffc00-0xfeaffcff irq 22 at device 1.0 on pci5
 >miibus1: <MII bus> on dc0
 >amphy0: <DM9102 10/100 media interface> PHY 1 on miibus1
 >amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 >dc0: Ethernet address: 00:08:a1:27:88:1c
 >dc0: [ITHREAD]
 >rl0: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xfeaff800-0xfeaff8ff irq 23 at device 2.0 on pci5
 >miibus2: <MII bus> on rl0
 >rlphy0: <RealTek internal media interface> PHY 0 on miibus2
 >rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 >rl0: Ethernet address: 00:19:e0:0e:a7:fa
 >rl0: [ITHREAD]
 >isab0: <PCI-ISA bridge> at device 31.0 on pci0
 >isa0: <ISA bus> on isab0
 >atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0
 >atapci1: [ITHREAD]
 >ata5: <ATA channel 0> on atapci1
 >ata5: [ITHREAD]
 >ata6: <ATA channel 1> on atapci1
 >ata6: [ITHREAD]
 >pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 >atapci2: <Intel ICH8 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 31.5 on pci0
 >atapci2: [ITHREAD]
 >ata7: <ATA channel 0> on atapci2
 >ata7: [ITHREAD]
 >ata8: <ATA channel 1> on atapci2
 >ata8: [ITHREAD]
 >acpi_button0: <Power Button> on acpi0
 >sio0: configured irq 4 not in bitmap of probed irqs 0
 >sio0: port may not be enabled
 >sio0: configured irq 4 not in bitmap of probed irqs 0
 >sio0: port may not be enabled
 >sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 >sio0: type 16550A
 >sio0: [FILTER]
 >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 >atkbd0: <AT Keyboard> irq 1 on atkbdc0
 >kbd0 at atkbd0
 >atkbd0: [GIANT-LOCKED]
 >atkbd0: [ITHREAD]
 >psm0: <PS/2 Mouse> irq 12 on atkbdc0
 >psm0: [GIANT-LOCKED]
 >psm0: [ITHREAD]
 >psm0: model IntelliMouse, device ID 3
 >sc0: <System console> at flags 0x100 on isa0
 >sc0: VGA <16 virtual consoles, flags=0x300>
 >sio1: configured irq 3 not in bitmap of probed irqs 0
 >sio1: port may not be enabled
 >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 >ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub3
 >kbd2 at ukbd0
 >uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub3
 >Timecounters tick every 1.000 msec
 >ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
 >ad10: 476940MB <Seagate ST3500320AS SD15> at ata5-master SATA150
 >acd0: DVDR <HL-DT-ST DVDRAM GSA-H62N/CL00> at ata6-master SATA150
 >pcm0: <HDA Codec: Analog Devices AD1988>
 >pcm0: <HDA Driver Revision: 20071129_0050>
 >SMP: AP CPU #1 Launched!
 >acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
 >cd0 at ata4 bus 0 target 0 lun 0
 >cd0: <HL-DT-ST DVDRAM GSA-H62N CL00> Removable CD-ROM SCSI-0 device
 >cd0: 3.300MB/s transfers
 >cd0: cd present [325318 x 2048 byte records]
 >GEOM_LABEL: Label for provider acd0 is iso9660/BROODWAR.
 >Trying to mount root from ufs:/dev/ad10s2a
 >re0: link state changed to UP
 >dc0: link state changed to DOWN
 >dc0: link state changed to UP
 >acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - WRITE_BIG timed out
 >acd0: FAILURE - WRITE_BIG timed out
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - WRITE_BIG timed out
 >acd0: FAILURE - WRITE_BIG timed out
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02
 >************************************************************************************************************************
 >
 >this was all working on my previous machine running 7.0 BETA-3 for i386
 >
 >I've tested this DVD burner on windows and it's working
 >
 >anyone having the same problem ?
 >
 >Regards
 >MGP



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2036365664.292711.1199546469974.JavaMail.nobody>