Date: Sat, 07 Apr 2007 06:03:45 +0000 From: "Rick Nekus" <solarux@hotmail.com> To: freebsd-multimedia@freebsd.org Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. Message-ID: <BAY134-F31C4A16F66BD74596411BAA15B0@phx.gbl> In-Reply-To: <BAY134-F14590A84AD680802691A9AA15B0@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi all, its me again,ha ha, sorry I forgot to setchannel - And (thanks Greg), I just found your older thread regarding "cxm0: video decoder isn't locked ... " :( -I rebooted, (without) the cxm modules loaded and then "kldload cxm,..." (and of course setting up tuner/channel should help ;) /usr/local/bin/pvr250-setchannel -a on -m 1 13 ok, yipee, I got Channel 13 (NTSC, Ottawa, Canada) NOTE: 1st:/ I initialy tried installing with the "pvrxxx" port. but no go. 2nd:/ I don't know if its was usleeps "pvrxxx_port-01042007.tgz" port install (which didn't seem to work, but it did appear to make a couple changes?, or it might have been me, ?) 3./ In either caes, I then (re)installed a fresh /usr/ports/multimedia/pvr250 <- which did install successfully this time and I was able to load the cxm drivers, ... -anyway, jus' wanted to note this for anyone who has a newer pvr-350 (North-america NTSC) which may be similar. -I'm sure much better instructions and port updates will follow. Thanks so very much guys/gals and MythTV, here I come ! Rick. >From: "Rick Nekus" <solarux@hotmail.com> >To: freebsd-multimedia@freebsd.org >Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. >Date: Sat, 07 Apr 2007 04:52:07 +0000 > >Hi All, >First,thanks Torfinn Ingolfsen for the pci TV-card info tips, and for >heading me in the right direction. > >I tried installing the newer >http://usleepless.110mb.com/pvrxxx_port-01042007.tgz from usleep, >and it seemed to install some updates, sorry I didn't get the complete >"make" output at that time, >but the last several output lines gave me the same errors as "Anders >Troback" got from his subject thread >"Re: pvrxxx 0x75" >-at this point I cleaned up my pvr ports; and installed the pvr250 port >according to >Jim Stapleton's reply to Anders's subject above. I have a newer pvr-350 >too. >sorry about these threads gettin' a little messy now > >anyway, for the first time I've been able to load the cxm drivers,.. > >I found a couple strange things; > >pv | grep pvr >0B 0:12:56 [ 0B/s ] [<=> > ] >the output just sits there? >and, >when I run "cat /dev/cxm0 > filneame.mpg" i get >"cxm0: video decoder isn't locked" in /var/log/messages >? > >-but everything else looks sane (see below) >Is there something else I can try to do. ? > >------------------------------------------------------------------------- > >pkg_info | grep -i pvr250 >pvr250-20051030 Hauppauge PVR-250/350 TV cards driver for the cxm >device > >------------------------------------------------------------------ >[rick@tiger ~]$ sudo pciconf -lv | grep -B 4 video >cxm0@pci2:10:0: class=0x040000 card=0x40000070 chip=0x08034444 rev=0x01 >hdr=0x00 > vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)' > device = 'iTVC15/CX23415 MPEG Codec' > class = multimedia > subclass = video >[rick@tiger ~]$ sudo lspci -vs 02:0a.0 >02:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 >MPEG-2 Encoder (rev 01) > Subsystem: Hauppauge computer works Inc. WinTV PVR-350 > Flags: bus master, medium devsel, latency 64, IRQ 21 > Memory at f4000000 (32-bit, prefetchable) > Capabilities: [44] Power Management version 2 >--------------------------------------------------------------------------------- >/var/log/messages > >Apr 6 22:23:25 tiger sudo: rick : TTY=ttyp1 ; PWD=/boot ; USER=root ; >COMMAND=/usr/bin/vi loader.conf >Apr 6 22:29:07 tiger sudo: rick : TTY=ttyp1 ; PWD=/usr/home/rick ; >USER=root ; COMMAND=/sbin/kldload cxm_iic >Apr 6 22:29:19 tiger sudo: rick : TTY=ttyp1 ; PWD=/usr/home/rick ; >USER=root ; COMMAND=/sbin/kldload cxm >Apr 6 22:32:13 tiger su: rick to root on /dev/ttyp1 >Apr 6 23:34:15 tiger kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem >0xf4000000-0xf7ffffff irq 21 at device 10.0 on pci2 >Apr 6 23:34:15 tiger kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C >controller> on cxm0 >Apr 6 23:34:15 tiger kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 >Apr 6 23:34:15 tiger kernel: iicbus0: <Philips I2C bus> on iicbb0 >master-only >Apr 6 23:34:15 tiger kernel: cxm0: LG Innotek TAPE-H001F tuner >Apr 6 23:34:15 tiger kernel: cxm0: SAA7115 rev 1 video decoder >Apr 6 23:34:15 tiger kernel: cxm0: MSP4448G-A2 audio decoder >Apr 6 23:34:15 tiger kernel: cxm0: IR Remote >Apr 6 23:34:15 tiger kernel: cxm0: [GIANT-LOCKED] >Apr 6 23:34:18 tiger kernel: cxm0: encoder firmware version 0x2050032 >Apr 6 23:34:18 tiger kernel: cxm0: decoder firmware version 0x2020023 >---------------------------------------------------------------------------------- >cr--r--r-- 1 root wheel 0, 41 Apr 6 23:40 /dev/cxm0 >---------------------------------------------------------------------------------- >dmesg: >... >cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at >device 10.0 on pci2 >cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 >iicbb0: <I2C bit-banging driver> on cxm_iic0 >iicbus0: <Philips I2C bus> on iicbb0 master-only >cxm0: LG Innotek TAPE-H001F tuner >cxm0: SAA7115 rev 1 video decoder >cxm0: MSP4448G-A2 audio decoder >cxm0: IR Remote >cxm0: [GIANT-LOCKED] >cxm0: encoder firmware version 0x2050032 >cxm0: decoder firmware version 0x2020023 >cxm0: video decoder isn't locked >cxm0: video decoder isn't locked >cxm0: video decoder isn't locked >cxm0: video decoder isn't locked >... >---------------------------------------------------------------------------- >[rick@tiger ~]$ cat /boot/loader.conf >snd_ich_load="YES" >atapicam_load="YES" >hw.ata.atapi_dma="1" >nvidia_load="YES" >linux_load="YES" >#bktr_load="YES" >cxm_iic_load="YES" >cxm_load="YES" >------------------------------------------------------------------------------- >tiger# kldstat >Id Refs Address Size Name >1 19 0xc0400000 70aee8 kernel >2 2 0xc0b0b000 1adb8 linux.ko >3 1 0xc0b26000 5fa0 snd_ich.ko >4 2 0xc0b2c000 22b88 sound.ko >5 1 0xc0b4f000 4ae8 atapicam.ko >6 1 0xc0b54000 6d2a84 nvidia.ko >7 2 0xc1227000 2d80 cxm_iic.ko >8 1 0xc122a000 8fb04 cxm.ko >9 1 0xc12ba000 59f20 acpi.ko >------------------------------------------------------------------------- > > > >>From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> >>To: freebsd-multimedia@freebsd.org >>Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. >>Date: Sun, 01 Apr 2007 22:03:08 +0200 >> >>On Sun, 01 Apr 2007 19:08:48 +0000 >>Rick Nekus <solarux@hotmail.com> wrote: >> >> > I did portscan fetch;portscan extract; portscan update >> > that should do it right ?, or is there a special "usleepless" update >> >>If you mean "portsnap" here, yes, thayt should do it. >> >> >> > available? >> > umm, trying to make sense of other threads here, does this mean >> > install FreeBSD 5.3 ? (is that the alternative for now?), ... >> >>No, by all means. I know it is April Fools' Day, but therer is no need >>to go backwards. :-) >>FreeBSD 6.2 will be fine. >> >> > uhh ok, well thats' a small letdown, should I use the pvr250 ( they >> >>I should rephrase that; the pvrxxx port doesn't work with the pvr-350 >>in *my* machine right now. This might be caused by other things than >>the port itself, which I haven't ruled out yet (a bad cable, for >>example). >> >> > both look the same to me pvr250/xxx ?) or maybe (on a dry-humour note) >> >>The pvr250 and the pvrxxx port might look the same, but the last time I >>checked, the pvr250 port was missing some needed ioctl's that MythTV >>required. This is some months ago, so things might have changed. Or >>not, I haven't checked. >> >>You could try the pvr250 port; if it works - good. >> >> > it sounds close to me ?, am I reading this wrong, but how did you get >> >>Yes, I guess our cards are equal, perhaps except for the tuner. >> >> > "yours'" working (or did you?) being you have the same cx23415 chip >> >>I got mine working, or actually, usleep got mine working while >>testing the pvrxxx driver. Right now, the canle signal is down, so I >>can only watch recordings, not test drivers. >> >> > (PVR-350) set I have -or is this a tuner specific fullfilment that is >> > not supported? >> >>I don't think the tuner is shown in the pciconf / lspci output, I think >>you will have to load a driver for that. Here is what the pvrxxx driver >>says about my card (from dmesg): >>cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf8000000-0xfbffffff irq 20 at >>device 0.0 on pci2 >>cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 >>iicbb0: <I2C bit-banging driver> on cxm_iic0 >>iicbus0: <Philips I2C bus> on iicbb0 master-only >>cxm0: Philips FM1216ME MK3 tuner >>cxm0: SAA7115 rev 1 video decoder >>cxm0: MSP4418G-B3 audio decoder >>cxm0: IR Remote >>cxm0: [FAST] >>cxm0: encoder firmware version 0x2060039 >>cxm0: decoder firmware version 0x2020023 >> >>This is with driver: >>root@kg-quiet# pv | grep pvr >>pvrxxx-20060822 = up-to-date with port >> >>(possibly modified) >>on a machine running: >>root@kg-quiet# uname -a >>FreeBSD kg-quiet.kg4.no 6.2-STABLE FreeBSD 6.2-STABLE #15: Thu Jan 25 >>21:44:50 CET 2007 root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET >>amd64 >> >>HTH >>PS. You don't have to CC me, I am subscribed to the freebsd-mobile list. >>-- >>Regards, >>Torfinn Ingolfsen, >>Norway >>_______________________________________________ >>freebsd-multimedia@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >>To unsubscribe, send any mail to >>"freebsd-multimedia-unsubscribe@freebsd.org" > >_________________________________________________________________ >Your Space. Your Friends. Your Stories. Share your world with Windows Live >Spaces. http://spaces.live.com/?mkt=en-ca > >_______________________________________________ >freebsd-multimedia@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >To unsubscribe, send any mail to >"freebsd-multimedia-unsubscribe@freebsd.org" _________________________________________________________________ Fine Dining & Fancy Food. Check Out This Collection Of Good Eats. http://local.live.com/?mkt=en-ca/?v=2&cid=A6D6BDB4586E357F!378
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY134-F31C4A16F66BD74596411BAA15B0>