Date: Wed, 24 May 2000 10:11:53 +1200 From: "David Clarke" <djclarke@cm-solutions.co.nz> To: <freebsd-questions@freebsd.org> Subject: Re: 250MB ZIP Drive on FBSD 4.0 Message-ID: <007b01bfc503$e6d425e0$0201a8c0@eskimo.cm-solutions.co.nz>
next in thread | raw e-mail | index | archive | help
Thanks, mount_msdos /dev/afd0s4 /zip works just fine. I must have tried all combinations but the one that worked :) Dave -----Original Message----- From: Kent Stewart <kstewart@3-cities.com> To: David Clarke <djclarke@cm-solutions.co.nz> Cc: freebsd-questions@freebsd.org <freebsd-questions@freebsd.org> Date: Wednesday, 24 May 2000 09:50 Subject: Re: 250MB ZIP Drive on FBSD 4.0 > > >> David Clarke wrote: >> >> Hi, >> >> I'm having trouble mounting an ATAPI 250MB ZIP Drive under FreeBSD >> 4.0. Any help much appreciated. >> >> Trying to mount the ZIP drive always provides the following errors: >> mount_msdos /dev/afd0 /zip >> mount_msdos: /dev/afd0: Input/output error > >You need to read Mark Mayo's Zip Drive Freebsd Info sheet at >http://www.vmunix.com/mark/FreeBSD/ZIP-FAQ.html > >The basic part to mounting the MSDOS partition is to use afd0s4. Read >the sheet. It is also covered in the FreeBSD/FAQ/hardware pages at >http://www.freebsd.org/FAQ/hardware.html > >Kent > >> or >> >> mount_msdos /dev/afd0a /zip >> mount_msdos: /dev/afd0a: Invalid argument >> >> >> Output from dmesg: >> ata1-master: Aladdin: two atapi devices on this channel, no DMA >> afd0: 239MB <IOMEGA ZIP 250 ATAPI> [239/64/32] at ata1-master using >> PIO3 >> ls of /dev/afd*: >> /dev/afd0 /dev/afd0c /dev/afd0f /dev/afd0s1 >> /dev/afd0s4 >> /dev/afd0a /dev/afd0d /dev/afd0g /dev/afd0s2 >> /dev/afd0b /dev/afd0e /dev/afd0h /dev/afd0s3 >> Kernel config file for ATAPI devices: >> # ATA and ATAPI devices >> device ata0 at isa? port IO_WD1 irq 14 >> device ata1 at isa? port IO_WD2 irq 15 >> device ata >> device atadisk # ATA disk drives >> device atapicd # ATAPI CDROM drives >> device atapifd # ATAPI floppy drives >> device atapist # ATAPI tape drives >> options ATA_STATIC_ID #Static device numbering >> options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices >> >> Thanks >> Dave >> >> >> David Clarke www.cm-solutions.co.nz www.sportsnz.co.nz >> Director - Technology >> >> Custom Made Solutions Ltd >> PO Box 10-819, Wellington >> Tel +64-4-384-7922 Fax +64-4-384-7924 > >-- >Kent Stewart >Richland, WA > >mailto:kstewart@3-cities.com >http://www.3-cities.com/~kstewart/index.html >FreeBSD News http://daily.daemonnews.org/ > >SETI(Search for Extraterrestrial Intelligence) @ HOME >http://setiathome.ssl.berkeley.edu/ > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?007b01bfc503$e6d425e0$0201a8c0>