Date: Thu, 5 Apr 2001 15:41:06 -0400 From: "Ken Menzel" <kenm@icarz.com> To: <freebsd-stable@FreeBSD.ORG> Subject: Test of RC1 fresh install Message-ID: <02ff01c0be08$5b848080$711663cf@icarz.com>
next in thread | raw e-mail | index | archive | help
Thought I would try out my new FreeBSD release. I just installed
FreeBSD on two new Dell servers here. (The same as all my other
servers). But the tapes drives won't work! Any ideas on what I did
wrong? I have three other servers running FreeBSD-stable with the same
DELL hardware (2400) and tape drives that work fine (Installed on
FBSD4.2)
. Here is the error:
janeway# mt status
mt: /dev/nsa0: Device not configured
janeway#
However dmesg says differently:
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <SONY TSL-11000 L0u6> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
pass1 at ahc0 bus 0 target 6 lun 1
pass1: <SONY TSL-11000 L0u6> Removable Changer SCSI-2 device
pass1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
pass4 at asr0 bus 0 target 6 lun 0
pass4: <DELL 1x4 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device
output of uname
FreeBSD janeway.icarz.com 4.3-RC FreeBSD 4.3-RC #0: Thu Apr 5
12:24:51 EDT 2001
sysadm@janeway.icarz.com:/usr/obj/usr/src/sys/GENERIC i386
I tried rebuilding the kernel and sh MAKEDEV all, and a cvsup to
today.
What else should I do?
Thanks!
-----------------------------------------------------
Ken Menzel ICQ# 9325188
www.icarz.com kenm@icarz.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02ff01c0be08$5b848080$711663cf>