Date: Tue, 4 Nov 1997 21:38:07 +0100 (CET) From: robsch@robkaos.ruhr.de (Robert Schien) To: freebsd-emulation@freebsd.org Subject: Re: Problem running ADABAS D database Message-ID: <m0xSpjj-000695C@robkaos.ruhr.de> In-Reply-To: <199711032331.AAA00995@ghost.mep.ruhr-uni-bochum.de> from Robert Eckardt at "Nov 4, 97 00:31:53 am"
next in thread | previous in thread | raw e-mail | index | archive | help
Meanwhile I´m a few steps further. The database is trying to start up, but now I get the following messages: 11.04 21:26:16 209 -11081 RTE 6.1.15.42 LINUX DATE 1997-04-17 11.04 21:26:16 209 -11081 key for ipc resources 0x44005ac6 11.04 21:26:16 209 -11070 bw;2000*sv,br;l1;l2;sn,rc,ut;ti,30000*us;compress 11.04 21:26:16 209 -11070 number of users: 10 11.04 21:26:16 209 -11070 number of servers: 14 11.04 21:26:16 209 -11070 number of tasks: 32 11.04 21:26:16 209 -11070 number of ukps: 6 11.04 21:26:16 209 -11070 using dynamic KGS 11.04 21:26:16 209 -11070 creating shared section size 7634944 11.04 21:26:16 209 -11987 sql41_create_shm: shmctl (stat) error, Bad address 11.04 21:26:16 209 -11987 ABEND: cannot create kernel shared section It looks like something goes wrong with shared memory. Are there any other kernel parameters I should tune? TIA Robert My kernel config file (RELEASE-2.2.2): # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.77.2.8 1997/04/18 14:06:20 nate Exp $ machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident GENERIC maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem #options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console #options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SYSVSHM options SYSVSEM options SYSVMSG options "IBCS2" options USER_LDT options SHMALL=8193 options SHMMAXPGS=8193 options "SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)" options SHMMIN=2 options SHMMNI=33 options SHMSEG=9 options COMPAT_LINUX config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 #controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. #controller ncr0 #controller amd0 #controller ahb0 #controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device sd0 #device od0 #See LINT for possible `od' options. #device st0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 #options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # # Laptop support (see LINT for more options) # #device apm0 at isa? disable # Advanced Power Management #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # PCCARD (PCMCIA) support #controller crd0 #device pcic0 at crd? #device pcic1 at crd? #device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr #device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr #device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr #device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device vx0 device ed0 at isa? port 0x280 net irq 3 iomem 0xd8000 vector edintr #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr #device ie1 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ex0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log #pseudo-device sl 1 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0xSpjj-000695C>