Date: Fri, 2 Oct 2009 15:08:44 +0200 (CEST) From: "JASSAL Aman" <aman.jassal@esigetel.fr> To: "Goran Gajic" <ggajic@afrodita.rcub.bg.ac.rs> Cc: freebsd-current@freebsd.org Subject: re: 8.0RC1: Can't mount usb stick Message-ID: <38424.83.206.131.26.1254488924.squirrel@webmail.esigetel.fr> In-Reply-To: <alpine.LRH.2.00.0910021023190.19560@afrodita.rcub.bg.ac.rs> References: <alpine.LRH.2.00.0910021023190.19560@afrodita.rcub.bg.ac.rs>
next in thread | previous in thread | raw e-mail | index | archive | help
I haven't tried mounting a USB stick on my 9.0-CURRENT just yet, but on 7.1, I used to do : # mount -t msdosfs /dev/da0s1 /"name of your target directory" You can try this, check what's in /dev/ to confirm what's in there, just in case. Aman Jassal Le Ven 2 octobre 2009 10:25, Goran Gajic a écrit : > > Same here: > > > ugen2.2: <vendor 0x1005> at usbus2 (disconnected) > umass0: at uhub2, port 5, addr 2 (disconnected) > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > ugen2.2: <vendor 0x1005> at usbus2 > umass0: <vendor 0x1005 USB FLASH DRIVE, class 0/0, rev 2.00/1.10, addr 2> > on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:1:0:-1: Attached to scbus1 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have > changed (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > da0 at umass-sim0 bus 0 target 0 lun 0 da0: < USB FLASH DRIVE PMAP> > Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > da0: 1968MB (4030464 512 byte sectors: 255H 63S/T 250C) > > > # mount -t msdosfs /dev/da0 /mnt > mount_msdosfs: /dev/da0: Invalid argument > > > > gg. _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38424.83.206.131.26.1254488924.squirrel>