Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 7 Jun 1996 19:43:50 -0400 (EDT)
From:      Jeffrey Wheat <jeff@tad.cetlink.net>
To:        questions@freebsd.org
Subject:   SMC 9332 (Digital DC21140) help needed
Message-ID:  <199606072343.TAA00468@tad.cetlink.net>

next in thread | raw e-mail | index | archive | help
Hi,
	I just got a new network controller for my machine and I am having
problems with the machine locking up on me when I try and boot. The system
is an acer ap43 mainboard with 32 megs of ram, 1542 scsi, 3 scsi drives, 
1 scsi cdrom, hercules pci video, 2 ne2000's, sb16 pro  and a smc 9332 
controller. I rebuilt my kernel to include the de device for the smc, removed 
one of the ne2000's and replaced the sysconfig entries to point use the de0 
instead. On boot, the system goes through all it's steps until it hits routed,
at which time the scsi light on the controller lights solid and I have to
reset. If I do not init the smc, the machien boots and runs fine. I suspect
some conflict with the aha controller but I am not sure where to look. Any
advice would be greatly appreciated! Many thanks in advance.

-Jeff

FreeBSD 2.1-STABLE #0: Fri Jun  7 18:28:10 EDT 1996
    root@tad:/usr/src/sys/compile/TAD
CPU: i486DX (486-class CPU)
  Origin = "AuthenticAMD"  Id = 0x494
real memory  = 33554432 (32768K bytes)
avail memory = 30560256 (29844K bytes)
Probing for devices on PCI bus 0:
chip0 <SiS 85c496> rev 49 on pci0:5
de0 <Digital DC21140 Fast Ethernet> rev 17 int a irq 9 on pci0:13
de0: DC21140 [10-100Mb/s] pass 1.1 Ethernet address 00:00:c0:98:95:c6
de0: enabling 10baseT UTP port
vga0 <VGA-compatible display device> rev 0 on pci0:15
Probing for devices on the ISA bus:
scprobe: keyboard RESET failed (result = 0xfa)
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <4 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 12 on isa
ed0: address 00:c0:f0:06:c5:c6, type NE2000 (16 bit) 
ed1 at 0x340-0x35f irq 10 on isa
ed1: address 00:00:b4:64:27:04, type NE2000 (16 bit) 
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
aha0 at 0x330-0x333 irq 11 drq 5 on isa
(aha0:0:0): "SEAGATE ST31200N 8648" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 1006MB (2061108 512 byte sectors)
sd0(aha0:0:0): with 2700 cyls, 9 heads, and an average 84 sectors/track
(aha0:1:0): "SEAGATE ST12550N 0014" type 0 fixed SCSI 2
sd1(aha0:1:0): Direct-Access 2040MB (4178874 512 byte sectors)
sd1(aha0:1:0): with 2708 cyls, 19 heads, and an average 81 sectors/track
(aha0:5:0): "NEC CD-ROM DRIVE:501 2.2" type 5 removable SCSI 2
cd0(aha0:5:0): CD-ROM cd present.[325252 x 2048 byte records]
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
matcdc0 not found at 0x320
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster 16 4.11>
sbxvi0 at 0x0 drq 7 on isa
sbxvo0: <SoundBlaster 16 4.11>
sbmidi0 at 0x300 on isa
 <SoundBlaster MPU-401>
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199606072343.TAA00468>