Date: Mon, 23 Oct 2006 00:01:29 +0200 From: Carl Johan Gustavsson <carl.gustavsson@bahnhofbredband.se> To: Freek Nossin <freeknossin@planet.nl> Cc: freebsd-stable@freebsd.org Subject: Re: partioning failed Message-ID: <453BEA39.5000508@bahnhofbredband.se> In-Reply-To: <200610221640.25873.josh@tcbug.org> References: <007001c6f605$4f5fddf0$9f00000a@edx2> <200610221640.25873.josh@tcbug.org>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Josh Paetzel wrote: > On Sunday 22 October 2006 13:10, Freek Nossin wrote: >> Hello, >> >> I've run into some problems while I was trying to install freebsd >> 6.1 (i386). When I've finished partitioning and the installer >> wants to write the partition data to disk, it fails to do so. I >> used the typical settings, ie one slice on the disc, with a >> default partitioning scheme (except that I merged the /tmp with >> /var). >> >> The installer reports: unable to find device node for >> /dev/ad0s1b. >> >> I tried to use another hard disk, which resulted in the same >> error. >> >> On VTY1 I got the following messages: ad0: WARNING - READ_DMA >> UDMA ICRC error (retrying request) LBA=63 ad0: WARNING - READ_DMA >> UDMA ICRC error (retrying request) LBA=63 ad0: FAILURE - READ_DMA >> status=51<ready, dsc, error> error=84<ICRC, aborted> LBA=63 >> >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad0: FAILURE - READ_DMA status=51<ready, dsc, error> >> error=84<ICRC, aborted>LBA=0 >> >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=64 >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) >> LBA=64 ad0: FAILURE - READ_DMA status=51<ready, dsc, error> >> error=84<ICRC, aborted> LBA=64 >> >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63 >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) >> LBA=63 ad0: FAILURE - READ_DMA status=51<ready, dsc, error> >> error=84<ICRC, aborted> LBA=63 >> >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63 >> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) >> LBA=63 ad0: FAILURE - READ_DMA status=51<ready, dsc, error> >> error=84<ICRC, aborted> LBA=63 >> >> System information: Athlon XP 1700+ / 786 MB Asus A7V266 (bios >> v1.11) Maxtor 60 GB >> >> Has anyone any suggestions? >> >> Thanks, >> >> Freek > > I'd try a different cable for the drive. If that doesn't fix it > the controller on the motherboard is probably bad. Hi! If you are using a 40-pin cable and changing to another 40-pin doesn't help, test with a 80-pin cable. FreeBSD can be a bit picky about that. / Carl -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFO+o08UQ1gvZaLdMRAt/hAKCdVWbYJYZ3SVCvdsw3uagRq8I2GQCgiEl1 wsOmOG7XuGrmlt756+TVq8M= =r8I0 -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?453BEA39.5000508>