Date: Sat, 23 Mar 2002 08:22:25 +0100 From: Volker Stolz <stolz@hyperion.informatik.rwth-aachen.de> To: stable@freebsd.org Cc: sos@freebsd.org Subject: ATA-tags broken on STABLE (VIA,SMP) Message-ID: <20020323082225.A3087@margaux.informatik.rwth-aachen.de>
next in thread | raw e-mail | index | archive | help
Please find attached the dmesg of the affected machine.
After cvsupping the first time since Soren's changes went in,
the machine panics (trap 12) immediately after mounting the drives
when ata-tags are enable on the DTLA.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #7: Sat Mar 23 08:06:25 CET 2002
root@monster.ikea.net:/usr/obj/usr/src/sys/MONSTER
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (751.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 256757760 (250740K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0448000.
ccd0-3: Concatenated disk drivers
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdd20
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 5
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
sym0: <810a> port 0xdc00-0xdcff mem 0xf7001000-0xf70010ff irq 11 at device 9.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
de0: <Digital 21041 Ethernet> port 0xe000-0xe07f mem 0xf7000000-0xf700007f irq 10 at device 10.0 on pci0
de0: 21041 [10Mb/s] pass 2.1
de0: address 00:40:05:a6:fc:01
pcm0: <Creative EMU10K1> port 0xe400-0xe41f irq 5 at device 11.0 on pci0
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 12.0 irq 11
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 12.1 irq 11
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.20 initialized. Default = block all, Logging = enabled
SMP: AP CPU #1 Launched!
ad0: 32253MB <MAXTOR 6L040J2> [69899/15/63] at ata0-master UDMA100
ad1: 19623MB <IBM-DTLA-305020> [39870/16/63] at ata0-slave UDMA100
acd0: CD-RW <4X4X32> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at sym0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-303 1.09> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
--
Wonderful \hbox (0.80312pt too nice) in paragraph at lines 16--18
Volker Stolz * stolz@i2.informatik.rwth-aachen.de
Please use PGP or S/MIME for correspondence!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020323082225.A3087>