Date: Sat, 07 Apr 2007 09:33:12 +0000 From: "Rick Nekus" <solarux@hotmail.com> To: freebsd-multimedia@freebsd.org Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - MythTV not working. Message-ID: <BAY134-F21E6C13CE918857FA9C0AA15B0@phx.gbl> In-Reply-To: <BAY134-F31C4A16F66BD74596411BAA15B0@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
"mythtv-setup" Its coming along: -I realize these errors are similar to last Dec.06 errors listed on various mythtv/pvrxxx threads regrading v4l enumerator problems. -this could be due to my "pvr250" port just recently installed). needless, I can stream TV-channels with mplayer no problem "cxm0: encoder dma not enough buffer space free" pid 1560 (mythtv-setup), uid 119: exited on signal 11 (core dumped) 2007-04-07 05:21:54.205 Could not query inputs. "eno: Inappropriate ioctl for device (25)" >From: "Rick Nekus" <solarux@hotmail.com> >To: freebsd-multimedia@freebsd.org >CC: solarux@hotmail.com >Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. >Date: Sat, 07 Apr 2007 06:03:45 +0000 > >Hi all, >its me again,ha ha, sorry I forgot to setchannel - And (thanks Greg), I >just found your older thread regarding "cxm0: video decoder isn't locked >... " >:( > >-I rebooted, (without) the cxm modules loaded and then "kldload cxm,..." >(and of course setting up tuner/channel should help ;) > >/usr/local/bin/pvr250-setchannel -a on -m 1 13 > >ok, yipee, I got Channel 13 (NTSC, Ottawa, Canada) > >NOTE: >1st:/ I initialy tried installing with the "pvrxxx" port. but no go. >2nd:/ I don't know if its was usleeps "pvrxxx_port-01042007.tgz" port >install (which didn't seem to work, but it did appear to make a couple >changes?, or it might have been me, ?) >3./ In either caes, I then (re)installed a fresh >/usr/ports/multimedia/pvr250 <- which did install successfully this time >and I was able to load the cxm drivers, ... > >-anyway, jus' wanted to note this for anyone who has a newer pvr-350 >(North-america NTSC) which may be similar. > >-I'm sure much better instructions and port updates will follow. > >Thanks so very much guys/gals > >and MythTV, here I come ! > > >Rick. > > >>From: "Rick Nekus" <solarux@hotmail.com> >>To: freebsd-multimedia@freebsd.org >>Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. >>Date: Sat, 07 Apr 2007 04:52:07 +0000 >> >>Hi All, >>First,thanks Torfinn Ingolfsen for the pci TV-card info tips, and for >>heading me in the right direction. >> >>I tried installing the newer >>http://usleepless.110mb.com/pvrxxx_port-01042007.tgz from usleep, >>and it seemed to install some updates, sorry I didn't get the complete >>"make" output at that time, >>but the last several output lines gave me the same errors as "Anders >>Troback" got from his subject thread >>"Re: pvrxxx 0x75" >>-at this point I cleaned up my pvr ports; and installed the pvr250 port >>according to >>Jim Stapleton's reply to Anders's subject above. I have a newer pvr-350 >>too. >>sorry about these threads gettin' a little messy now >> >>anyway, for the first time I've been able to load the cxm drivers,.. >> >>I found a couple strange things; >> >>pv | grep pvr >>0B 0:12:56 [ 0B/s ] [<=> >> ] >>the output just sits there? >>and, >>when I run "cat /dev/cxm0 > filneame.mpg" i get >>"cxm0: video decoder isn't locked" in /var/log/messages >>? >> >>-but everything else looks sane (see below) >>Is there something else I can try to do. ? >> >>------------------------------------------------------------------------- >> >>pkg_info | grep -i pvr250 >>pvr250-20051030 Hauppauge PVR-250/350 TV cards driver for the cxm >>device >> >>------------------------------------------------------------------ >>[rick@tiger ~]$ sudo pciconf -lv | grep -B 4 video >>cxm0@pci2:10:0: class=0x040000 card=0x40000070 chip=0x08034444 rev=0x01 >>hdr=0x00 >> vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)' >> device = 'iTVC15/CX23415 MPEG Codec' >> class = multimedia >> subclass = video >>[rick@tiger ~]$ sudo lspci -vs 02:0a.0 >>02:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 >>MPEG-2 Encoder (rev 01) >> Subsystem: Hauppauge computer works Inc. WinTV PVR-350 >> Flags: bus master, medium devsel, latency 64, IRQ 21 >> Memory at f4000000 (32-bit, prefetchable) >> Capabilities: [44] Power Management version 2 >>--------------------------------------------------------------------------------- >>/var/log/messages >> >>Apr 6 22:23:25 tiger sudo: rick : TTY=ttyp1 ; PWD=/boot ; USER=root ; >>COMMAND=/usr/bin/vi loader.conf >>Apr 6 22:29:07 tiger sudo: rick : TTY=ttyp1 ; PWD=/usr/home/rick ; >>USER=root ; COMMAND=/sbin/kldload cxm_iic >>Apr 6 22:29:19 tiger sudo: rick : TTY=ttyp1 ; PWD=/usr/home/rick ; >>USER=root ; COMMAND=/sbin/kldload cxm >>Apr 6 22:32:13 tiger su: rick to root on /dev/ttyp1 >>Apr 6 23:34:15 tiger kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem >>0xf4000000-0xf7ffffff irq 21 at device 10.0 on pci2 >>Apr 6 23:34:15 tiger kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C >>controller> on cxm0 >>Apr 6 23:34:15 tiger kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 >>Apr 6 23:34:15 tiger kernel: iicbus0: <Philips I2C bus> on iicbb0 >>master-only >>Apr 6 23:34:15 tiger kernel: cxm0: LG Innotek TAPE-H001F tuner >>Apr 6 23:34:15 tiger kernel: cxm0: SAA7115 rev 1 video decoder >>Apr 6 23:34:15 tiger kernel: cxm0: MSP4448G-A2 audio decoder >>Apr 6 23:34:15 tiger kernel: cxm0: IR Remote >>Apr 6 23:34:15 tiger kernel: cxm0: [GIANT-LOCKED] >>Apr 6 23:34:18 tiger kernel: cxm0: encoder firmware version 0x2050032 >>Apr 6 23:34:18 tiger kernel: cxm0: decoder firmware version 0x2020023 >>---------------------------------------------------------------------------------- >>cr--r--r-- 1 root wheel 0, 41 Apr 6 23:40 /dev/cxm0 >>---------------------------------------------------------------------------------- >>dmesg: >>... >>cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at >>device 10.0 on pci2 >>cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 >>iicbb0: <I2C bit-banging driver> on cxm_iic0 >>iicbus0: <Philips I2C bus> on iicbb0 master-only >>cxm0: LG Innotek TAPE-H001F tuner >>cxm0: SAA7115 rev 1 video decoder >>cxm0: MSP4448G-A2 audio decoder >>cxm0: IR Remote >>cxm0: [GIANT-LOCKED] >>cxm0: encoder firmware version 0x2050032 >>cxm0: decoder firmware version 0x2020023 >>cxm0: video decoder isn't locked >>cxm0: video decoder isn't locked >>cxm0: video decoder isn't locked >>cxm0: video decoder isn't locked >>... >>---------------------------------------------------------------------------- >>[rick@tiger ~]$ cat /boot/loader.conf >>snd_ich_load="YES" >>atapicam_load="YES" >>hw.ata.atapi_dma="1" >>nvidia_load="YES" >>linux_load="YES" >>#bktr_load="YES" >>cxm_iic_load="YES" >>cxm_load="YES" >>------------------------------------------------------------------------------- >>tiger# kldstat >>Id Refs Address Size Name >>1 19 0xc0400000 70aee8 kernel >>2 2 0xc0b0b000 1adb8 linux.ko >>3 1 0xc0b26000 5fa0 snd_ich.ko >>4 2 0xc0b2c000 22b88 sound.ko >>5 1 0xc0b4f000 4ae8 atapicam.ko >>6 1 0xc0b54000 6d2a84 nvidia.ko >>7 2 0xc1227000 2d80 cxm_iic.ko >>8 1 0xc122a000 8fb04 cxm.ko >>9 1 0xc12ba000 59f20 acpi.ko >>------------------------------------------------------------------------- >> >> >> >>>From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> >>>To: freebsd-multimedia@freebsd.org >>>Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not >>>working. >>>Date: Sun, 01 Apr 2007 22:03:08 +0200 >>> >>>On Sun, 01 Apr 2007 19:08:48 +0000 >>>Rick Nekus <solarux@hotmail.com> wrote: >>> >>> > I did portscan fetch;portscan extract; portscan update >>> > that should do it right ?, or is there a special "usleepless" update >>> >>>If you mean "portsnap" here, yes, thayt should do it. >>> >>> >>> > available? >>> > umm, trying to make sense of other threads here, does this mean >>> > install FreeBSD 5.3 ? (is that the alternative for now?), ... >>> >>>No, by all means. I know it is April Fools' Day, but therer is no need >>>to go backwards. :-) >>>FreeBSD 6.2 will be fine. >>> >>> > uhh ok, well thats' a small letdown, should I use the pvr250 ( they >>> >>>I should rephrase that; the pvrxxx port doesn't work with the pvr-350 >>>in *my* machine right now. This might be caused by other things than >>>the port itself, which I haven't ruled out yet (a bad cable, for >>>example). >>> >>> > both look the same to me pvr250/xxx ?) or maybe (on a dry-humour note) >>> >>>The pvr250 and the pvrxxx port might look the same, but the last time I >>>checked, the pvr250 port was missing some needed ioctl's that MythTV >>>required. This is some months ago, so things might have changed. Or >>>not, I haven't checked. >>> >>>You could try the pvr250 port; if it works - good. >>> >>> > it sounds close to me ?, am I reading this wrong, but how did you get >>> >>>Yes, I guess our cards are equal, perhaps except for the tuner. >>> >>> > "yours'" working (or did you?) being you have the same cx23415 chip >>> >>>I got mine working, or actually, usleep got mine working while >>>testing the pvrxxx driver. Right now, the canle signal is down, so I >>>can only watch recordings, not test drivers. >>> >>> > (PVR-350) set I have -or is this a tuner specific fullfilment that is >>> > not supported? >>> >>>I don't think the tuner is shown in the pciconf / lspci output, I think >>>you will have to load a driver for that. Here is what the pvrxxx driver >>>says about my card (from dmesg): >>>cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf8000000-0xfbffffff irq 20 at >>>device 0.0 on pci2 >>>cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 >>>iicbb0: <I2C bit-banging driver> on cxm_iic0 >>>iicbus0: <Philips I2C bus> on iicbb0 master-only >>>cxm0: Philips FM1216ME MK3 tuner >>>cxm0: SAA7115 rev 1 video decoder >>>cxm0: MSP4418G-B3 audio decoder >>>cxm0: IR Remote >>>cxm0: [FAST] >>>cxm0: encoder firmware version 0x2060039 >>>cxm0: decoder firmware version 0x2020023 >>> >>>This is with driver: >>>root@kg-quiet# pv | grep pvr >>>pvrxxx-20060822 = up-to-date with port >>> >>>(possibly modified) >>>on a machine running: >>>root@kg-quiet# uname -a >>>FreeBSD kg-quiet.kg4.no 6.2-STABLE FreeBSD 6.2-STABLE #15: Thu Jan 25 >>>21:44:50 CET 2007 root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET >>>amd64 >>> >>>HTH >>>PS. You don't have to CC me, I am subscribed to the freebsd-mobile list. >>>-- >>>Regards, >>>Torfinn Ingolfsen, >>>Norway >>>_______________________________________________ >>>freebsd-multimedia@freebsd.org mailing list >>>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >>>To unsubscribe, send any mail to >>>"freebsd-multimedia-unsubscribe@freebsd.org" >> >>_________________________________________________________________ >>Your Space. Your Friends. Your Stories. Share your world with Windows Live >>Spaces. http://spaces.live.com/?mkt=en-ca >> >>_______________________________________________ >>freebsd-multimedia@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >>To unsubscribe, send any mail to >>"freebsd-multimedia-unsubscribe@freebsd.org" > >_________________________________________________________________ >Fine Dining & Fancy Food. Check Out This Collection Of Good Eats. >http://local.live.com/?mkt=en-ca/?v=2&cid=A6D6BDB4586E357F!378 > _________________________________________________________________ Don’t waste time standing in line—try shopping online. Visit Sympatico / MSN Shopping today! http://shopping.sympatico.msn.ca
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY134-F21E6C13CE918857FA9C0AA15B0>