Date: Fri, 16 May 2008 02:47:57 GMT From: Julian Elischer <julian@FreeBSD.org> To: Perforce Change Reviews <perforce@freebsd.org> Subject: PERFORCE change 141686 for review Message-ID: <200805160247.m4G2lvNI042465@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=141686 Change 141686 by julian@julian_trafmon1 on 2008/05/16 02:47:32 compile in_rmx.c and remove SCTP from VIMAGE Affected files ... .. //depot/projects/vimage/src/sys/i386/conf/VIMAGE#10 edit .. //depot/projects/vimage/src/sys/netinet/in_rmx.c#12 edit Differences ... ==== //depot/projects/vimage/src/sys/i386/conf/VIMAGE#10 (text+ko) ==== @@ -1,16 +1,328 @@ # -# VIMAGE - sample kernel configuration file with a virtualized network stack -# configure. +# GENERIC -- Generic kernel configuration file for FreeBSD/i386 +# +# For more information on this file, please read the handbook section on +# Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. # -# $FreeBSD$ +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. # -include GENERIC -ident VIMAGE +# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.486 2008/05/03 17:05:38 sam Exp $ + +cpu I486_CPU +cpu I586_CPU +cpu I686_CPU +ident GENERIC + +# To statically compile in device wiring instead of /boot/device.hints +#hints "GENERIC.hints" # Default places to look for devices. + +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols + +options VIMAGE # VIMAGE +options SCHED_ULE # ULE scheduler +options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +nooptions SCTP # Stream Control Transmission Protocol +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options MD_ROOT # MD is a potential root device +options NFSCLIENT # Network Filesystem Client +options NFSSERVER # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCLIENT +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] +options COMPAT_FREEBSD4 # Compatible with FreeBSD4 +options COMPAT_FREEBSD5 # Compatible with FreeBSD5 +options COMPAT_FREEBSD6 # Compatible with FreeBSD6 +options COMPAT_FREEBSD7 # Compatible with FreeBSD7 +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) support +options STACK # stack(9) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options STOP_NMI # Stop CPUS using NMI instead of IPI +options AUDIT # Security event auditing + +# Debugging for use in -current +options KDB # Enable kernel debugger support. +options DDB # Support DDB. +options GDB # Support remote GDB. +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed + +# To make an SMP kernel, the next two lines are needed +options SMP # Symmetric MultiProcessor Kernel +device apic # I/O APIC + +# CPU frequency control +device cpufreq + +# Bus support. +device eisa +device pci + +# Floppy drives +device fdc + +# ATA and ATAPI devices +device ata +device atadisk # ATA disk drives +device ataraid # ATA RAID drives +device atapicd # ATAPI CDROM drives +device atapifd # ATAPI floppy drives +device atapist # ATAPI tape drives +options ATA_STATIC_ID # Static device numbering + +# SCSI Controllers +device ahb # EISA AHA1742 family +device ahc # AHA2940 and onboard AIC7xxx devices +options AHC_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~128k to driver. +device ahd # AHA39320/29320 and onboard AIC79xx devices +options AHD_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~215k to driver. +device amd # AMD 53C974 (Tekram DC-390(T)) +device hptiop # Highpoint RocketRaid 3xxx series +device isp # Qlogic family +#device ispfw # Firmware for QLogic HBAs- normally a module +device mpt # LSI-Logic MPT-Fusion +#device ncr # NCR/Symbios Logic +device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') +device trm # Tekram DC395U/UW/F DC315U adapters + +device adv # Advansys SCSI adapters +device adw # Advansys wide SCSI adapters +device aha # Adaptec 154x SCSI adapters +device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. +device bt # Buslogic/Mylex MultiMaster SCSI adapters + +device ncv # NCR 53C500 +device nsp # Workbit Ninja SCSI-3 +device stg # TMC 18C30/18C50 + +# SCSI peripherals +device scbus # SCSI bus (required for SCSI) +device ch # SCSI media changers +device da # Direct Access (disks) +device sa # Sequential Access (tape etc) +device cd # CD +device pass # Passthrough device (direct SCSI access) +device ses # SCSI Environmental Services (and SAF-TE) + +# RAID controllers interfaced to the SCSI subsystem +device amr # AMI MegaRAID +device arcmsr # Areca SATA II RAID +device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID +device ciss # Compaq Smart RAID 5* +device dpt # DPT Smartcache III, IV - See NOTES for options +device hptmv # Highpoint RocketRAID 182x +device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx +device iir # Intel Integrated RAID +device ips # IBM (Adaptec) ServeRAID +device mly # Mylex AcceleRAID/eXtremeRAID +device twa # 3ware 9000 series PATA/SATA RAID + +# RAID controllers +device aac # Adaptec FSA RAID +device aacp # SCSI passthrough for aac (requires CAM) +device ida # Compaq Smart RAID +device mfi # LSI MegaRAID SAS +device mlx # Mylex DAC960 family +device pst # Promise Supertrak SX6000 +device twe # 3ware ATA RAID + +# atkbdc0 controls both the keyboard and the PS/2 mouse +device atkbdc # AT keyboard controller +device atkbd # AT keyboard +device psm # PS/2 mouse + +device kbdmux # keyboard multiplexer + +device vga # VGA video card driver + +device splash # Splash screen and screen saver support + +# syscons is the default console driver, resembling an SCO console +device sc + +device agp # support several AGP chipsets + +# Power management support (see NOTES for more options) +#device apm +# Add suspend/resume support for the i8254. +device pmtimer + +# PCCARD (PCMCIA) support +# PCMCIA and cardbus bridge support +device cbb # cardbus (yenta) bridge +device pccard # PC Card (16-bit) bus +device cardbus # CardBus (32-bit) bus + +# Serial (COM) ports +device sio # 8250, 16[45]50 based serial ports +device uart # Generic UART driver + +# Parallel port +device ppc +device ppbus # Parallel port bus (required) +device lpt # Printer +device plip # TCP/IP over parallel +device ppi # Parallel port interface device +#device vpo # Requires scbus and da + +# If you've got a "dumb" serial or parallel PCI card that is +# supported by the puc(4) glue driver, uncomment the following +# line to enable it (connects to sio, uart and/or ppc drivers): +#device puc + +# PCI Ethernet NICs. +device de # DEC/Intel DC21x4x (``Tulip'') +device em # Intel PRO/1000 adapter Gigabit Ethernet Card +device ixgb # Intel PRO/10GbE Ethernet Card +device le # AMD Am7900 LANCE and Am79C9xx PCnet +device txp # 3Com 3cR990 (``Typhoon'') +device vx # 3Com 3c590, 3c595 (``Vortex'') + +# PCI Ethernet NICs that use the common MII bus controller code. +# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! +device miibus # MII bus support +device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet +device bfe # Broadcom BCM440x 10/100 Ethernet +device bge # Broadcom BCM570xx Gigabit Ethernet +device dc # DEC/Intel 21143 and various workalikes +device fxp # Intel EtherExpress PRO/100B (82557, 82558) +device lge # Level 1 LXT1001 gigabit Ethernet +device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet +device nfe # nVidia nForce MCP on-board Ethernet +device nge # NatSemi DP83820 gigabit Ethernet +#device nve # nVidia nForce MCP on-board Ethernet Networking +device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') +device re # RealTek 8139C+/8169/8169S/8110S +device rl # RealTek 8129/8139 +device sf # Adaptec AIC-6915 (``Starfire'') +device sis # Silicon Integrated Systems SiS 900/SiS 7016 +device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet +device ste # Sundance ST201 (D-Link DFE-550TX) +device stge # Sundance/Tamarack TC9021 gigabit Ethernet +device ti # Alteon Networks Tigon I/II gigabit Ethernet +device tl # Texas Instruments ThunderLAN +device tx # SMC EtherPower II (83c170 ``EPIC'') +device vge # VIA VT612x gigabit Ethernet +device vr # VIA Rhine, Rhine II +device wb # Winbond W89C840F +device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') + +# ISA Ethernet NICs. pccard NICs included. +device cs # Crystal Semiconductor CS89x0 NIC +# 'device ed' requires 'device miibus' +device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards +device ex # Intel EtherExpress Pro/10 and Pro/10+ +device ep # Etherlink III based cards +device fe # Fujitsu MB8696x based cards +device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. +device sn # SMC's 9000 series of Ethernet chips +device xe # Xircom pccard Ethernet + +# Wireless NIC cards +device wlan # 802.11 support +options IEEE80211_DEBUG # enable debug msgs +options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's +device wlan_wep # 802.11 WEP support +device wlan_ccmp # 802.11 CCMP support +device wlan_tkip # 802.11 TKIP support +device wlan_amrr # AMRR transmit rate control algorithm +device an # Aironet 4500/4800 802.11 wireless NICs. +device ath # Atheros pci/cardbus NIC's +device ath_hal # Atheros HAL (Hardware Access Layer) +device ath_rate_sample # SampleRate tx rate control for ath +device ral # Ralink Technology RT2500 wireless NICs. +device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. +#device wl # Older non 802.11 Wavelan wireless NIC. + +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device ether # Ethernet support +device sl # Kernel SLIP +device ppp # Kernel PPP +device tun # Packet tunnel. +device pty # Pseudo-ttys (telnet etc) +device md # Memory "disks" +device gif # IPv6 and IPv4 tunneling +device faith # IPv6-to-IPv4 relaying (translation) +device firmware # firmware assist module + +# The `bpf' device enables the Berkeley Packet Filter. +# Be aware of the administrative consequences of enabling this! +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter -options VIMAGE +# USB support +device uhci # UHCI PCI->USB interface +device ohci # OHCI PCI->USB interface +device ehci # EHCI PCI->USB interface (USB 2.0) +device usb # USB Bus (required) +#device udbp # USB Double Bulk Pipe devices +device ugen # Generic +device uhid # "Human Interface Devices" +device ukbd # Keyboard +device ulpt # Printer +device umass # Disks/Mass storage - Requires scbus and da +device ums # Mouse +device ural # Ralink Technology RT2500USB wireless NICs +device rum # Ralink Technology RT2501USB wireless NICs +device zyd # ZyDAS zb1211/zb1211b wireless NICs +device urio # Diamond Rio 500 MP3 player +device uscanner # Scanners +# USB Serial devices +device ucom # Generic com ttys +device uark # Technologies ARK3116 based serial adapters +device ubsa # Belkin F5U103 and compatible serial adapters +device ubser # BWCT console serial adapters +device uftdi # For FTDI usb serial adapters +device uipaq # Some WinCE based devices +device uplcom # Prolific PL-2303 serial adapters +device uslcom # SI Labs CP2101/CP2102 serial adapters +device uvisor # Visor and Palm devices +device uvscom # USB serial support for DDI pocket's PHS +# USB Ethernet, requires miibus +device aue # ADMtek USB Ethernet +device axe # ASIX Electronics USB Ethernet +device cdce # Generic USB over Ethernet +device cue # CATC USB Ethernet +device kue # Kawasaki LSI USB Ethernet +device rue # RealTek RTL8150 USB Ethernet +device udav # Davicom DM9601E USB -# -# Some kernel subsystems and functions don't yet compile with VIMAGE. Remove -# from the configuration for now. -# -nooptions SCTP +# FireWire support +device firewire # FireWire bus code +device sbp # SCSI over FireWire (Requires scbus and da) +device fwe # Ethernet over FireWire (non-standard!) +device fwip # IP over FireWire (RFC 2734,3146) +device dcons # Dumb console driver +device dcons_crom # Configuration ROM for dcons ==== //depot/projects/vimage/src/sys/netinet/in_rmx.c#12 (text+ko) ==== @@ -271,34 +271,10 @@ static struct callout rtq_timer; #endif -static void in_rtqtimo_one(void *rock); - static void -in_rtqtimo(void *rock) +in_rtqtimo_one(struct radix_node_head *rnh) { - int fibnum; - void *newrock; - CURVNET_SET_QUIET((struct vnet *) rock); - INIT_VNET_NET((struct vnet *) rock); - INIT_VNET_INET((struct vnet *) rock); - struct timeval atv; - - KASSERT((rock == (void *)rt_tables[0][AF_INET]), - ("in_rtqtimo: unexpected arg")); - for (fibnum = 0; fibnum < rt_numfibs; fibnum++) { - if ((newrock = V_rt_tables[fibnum][AF_INET]) != NULL) - in_rtqtimo_one(newrock); - } - atv.tv_usec = 0; - atv.tv_sec = V_rtq_timeout; - callout_reset(&V_rtq_timer, tvtohz(&atv), in_rtqtimo, rock); - CURVNET_RESTORE(); -} - -static void -in_rtqtimo_one(void *rnh) -{ - INIT_VNET_NET(curvnet); + INIT_VNET_INET(curvnet); struct rtqk_arg arg; static time_t last_adjusted_timeout = 0; @@ -337,19 +313,40 @@ rnh->rnh_walktree(rnh, in_rtqkill, &arg); RADIX_NODE_HEAD_UNLOCK(rnh); } +} + +static void +in_rtqtimo(void *rock) +{ + int fibnum; + void *newrock; + CURVNET_SET_QUIET((struct vnet *) rock); + INIT_VNET_NET((struct vnet *) rock); + INIT_VNET_INET((struct vnet *) rock); + struct timeval atv; + KASSERT((rock == (void *)rt_tables[0][AF_INET]), + ("in_rtqtimo: unexpected arg")); + for (fibnum = 0; fibnum < rt_numfibs; fibnum++) { + if ((newrock = V_rt_tables[fibnum][AF_INET]) != NULL) + in_rtqtimo_one(newrock); + } + atv.tv_usec = 0; + atv.tv_sec = V_rtq_timeout; + callout_reset(&V_rtq_timer, tvtohz(&atv), in_rtqtimo, rock); CURVNET_RESTORE(); } void in_rtqdrain(void) { - VNET_ITERLOOP_BEGIN(); - INIT_VNET_NET(vnet_iter); struct radix_node_head *rnh; struct rtqk_arg arg; int fibnum; + VNET_ITERLOOP_BEGIN(); + INIT_VNET_NET(vnet_iter); + for ( fibnum = 0; fibnum < rt_numfibs; fibnum++) { rnh = V_rt_tables[fibnum][AF_INET]; arg.found = arg.killed = 0; @@ -361,6 +358,7 @@ rnh->rnh_walktree(rnh, in_rtqkill, &arg); RADIX_NODE_HEAD_UNLOCK(rnh); } + VNET_ITERLOOP_END(); } static int _in_rt_was_here; @@ -370,7 +368,6 @@ int in_inithead(void **head, int off) { - INIT_VNET_NET(curvnet); INIT_VNET_INET(curvnet); struct radix_node_head *rnh;
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805160247.m4G2lvNI042465>