Date: Sun, 12 Nov 2006 00:02:02 +0100 From: =?ISO-8859-1?Q?Olivier_R=E9gnier?= <regnier.olivier@gmail.com> To: freebsd-hardware@freebsd.org Subject: Slimtype DVDRW SOSw-833S/VRS2 ATA/ATAPI Message-ID: <4556566A.5010505@gmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------060600080101010800090809 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Hello, I'm running on FreeBSD 6.1-RELEASE-p10 and i would like to listen a music cd, to look a dvd film or to burn a cd data but i can't do that. The material is new. Here some information about it: - Acer Aspire 3002WLMI - Mobile AMD Sempron processor 2800+ - 15.4 WXGA wide TFT LCD - 60GB HDD - DVD-Dual (Support DVD+R Double Layer/DVD+RW) - 512MB DDR - 802.11b/g wireless LAN To use my DVD/CD burner, i compiled my kernel with these parameters: # --------------- # Kernel. # --------------- # Options options CD9660 # ISO 9660 Filesystem # ATA and ATAPI devices device atapicd # ATAPI CDROM drives # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) # ATAPI/CAM device atapicam if you looks the dmesg file, i obtain these lines: acd0: DVDR <Slimtype DVDRW SOSW-833S/VRS2> at ata1-master UDMA33 acd0: FAILURE - PREVENT_ALLOW timed out acd0: FAILURE - PREVENT_ALLOW timed out acd0: FAILURE - READ_SUBCHANNEL timed out acd0: FAILURE - PAUSE ILLEGAL REQUEST asc=0xb9 ascq=0x00 Well, after i activated the dma for the dvd/cd burner with this line in my loader.conf: hw.ata.atapi_dma="1" After the new kernel is installed, and the system is rebooted, i modified my devfs.conf file with the good permissions, i think: own xpt0 olivier perm xpt0 0660 own acd0 olivier perm acd0 0660 link acd0 cdrom link acd0 dvd then, i tested my dvd/cd burner with xmms. I push on the play button, the cdrom engages and after 1 second, more nothing. Second test, i used mplayer to look my dvd film and nothing. I don't know what happened with it. Perhaps FreeBSD doesn't support my Slimtype DVDRW ? But if i use the atacontrol list command, i have this: ATA channel 1: Master: acd0 <Slimtype DVDRW SOSW-833S/VRS2> ATA/ATAPI revision 5 Slave: no device present It is terrible, when you cannot use your material. With Microsoft Windows, I do not have any problem and on the same laptop. Estranged no ? But i want to stay on FreeBSD to find a solution. My situation is delicate. Could you help me about this ? Thank you very much. Olivier Regnier. --------------060600080101010800090809 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE-p10 #3: Sat Nov 11 23:23:51 UTC 2006 root@elipse:/usr/src/sys/i386/compile/ORION ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile AMD Sempron(tm) Processor 2800+ (1600.06-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x10fc0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xc2500800<SYSCALL,NX,MMX+,FFXSR,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 468647936 (446 MB) avail memory = 449200128 (428 MB) ACPI-0377: *** Info: Table [SSDT] replaced by host OS ACPI: overriding DSDT/SSDT with custom table ACPI-0377: *** Info: Table [DSDT] replaced by host OS MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard wlan: mac acl policy registered acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 760 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 2.5 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <simple comms, generic modem> at device 2.6 (no driver attached) pcm0: <SiS 7012> port 0x1400-0x14ff,0x1c80-0x1cff irq 18 at device 2.7 on pci0 pcm0: <Avance Logic ALC203 AC97 Codec> ohci0: <SiS 5571 USB controller> mem 0xe2002000-0xe2002fff irq 20 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe2003000-0xe2003fff irq 21 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe2004000-0xe2004fff irq 23 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered sis0: <SiS 900 10/100BaseTX> port 0x1800-0x18ff mem 0xe2005000-0xe2005fff irq 19 at device 4.0 on pci0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:c0:9f:a4:d2:f0 cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ndis0: <Broadcom 802.11g Network Adapter> mem 0xe2000000-0xe2001fff irq 17 at device 11.0 on pci0 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: 00:0e:9b:d3:b5:7e acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd5fff,0xdc000-0xe3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1600064936 Hz quality 800 Timecounters tick every 1.000 msec ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100 acd0: DVDR <Slimtype DVDRW SOSW-833S/VRS2> at ata1-master UDMA33 acd0: FAILURE - PREVENT_ALLOW timed out acd0: FAILURE - PREVENT_ALLOW timed out Trying to mount root from ufs:/dev/ad0s2a acd0: FAILURE - READ_SUBCHANNEL timed out acd0: FAILURE - PAUSE ILLEGAL REQUEST asc=0xb9 ascq=0x00 --------------060600080101010800090809--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4556566A.5010505>