Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 29 Apr 2000 09:26:13 -0700
From:      Tim Pozar <pozar@lns.com>
To:        multimedia@FreeBSD.ORG, mobile@FreeBSD.ORG
Subject:   ESS Technology Maestro 2E Audio controller working yet?
Message-ID:  <20000429092613.A18874@lns.com>

next in thread | raw e-mail | index | archive | help
Anyone got the ESS Technology Maestro 2E Audio controller working
yet?  The data on the Maestro is thin in the mailling list archives.

I have a Dell Latitude CPx that uses it.  I have been pretty happy
with the laptop 'cept getting the sound working.

Thanks for any pointers....

dmesg follows..

Tim

PS. The Wavelan 802.11b support is great!  It is working just fine
with an Airport at home.
--
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #16: Thu Apr 27 22:03:05 PDT 2000
    root@tim.disappearing.com:/usr/src/sys/compile/FARNSWORTH
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (498.47-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 134152192 (131008K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 126373888 (123412K bytes)
Preloaded elf kernel "kernel" at 0xc0402000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040209c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0xd800-0xd8ff irq 5 at device 8.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
sb_reset_dsp failed
sb_reset_dsp failed
pca0 at port 0x40 on isa0
ad0: 17301MB <FUJITSU MHJ2181AT> [35152/16/63] at ata0-master using UDMA33
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 1
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 3 slot 1 on pccard1
wi0: Ethernet address: 00:60:1d:f1:6b:10
wi0: supplying EUI64: 00:60:1d:ff:fe:f1:6b:10
wi0: starting DAD for fe80:000b::0260:1dff:fef1:6b10
wi0: DAD complete for fe80:000b::0260:1dff:fef1:6b10 - no duplicates found
-- 
  Snail: Tim Pozar / LNS / 1978 45th Ave / San Francisco CA 94116 / USA
               POTS: +1 415 665 3790  Radio: KC6GNJ / KAE6247
"It's a damn poor mind that can only think of one way to spell a word."
                        - Andrew Jackson
"What is wanted is not the will to believe, but the will to find out,
    which is the exact opposite."              - Bertrand Russel


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000429092613.A18874>