Date: Fri, 2 Oct 2009 21:25:49 +0200 (CEST) From: kama <kama@pvp.se> To: Erwin Lansing <erwin@FreeBSD.org> Cc: current@FreeBSD.org Subject: Re: bge(4) hang on 8.0-RC1 Message-ID: <20091002212131.U37424@ns1.as.pvp.se> In-Reply-To: <20090922165228.GD54962@droso.net> References: <20090922165228.GD54962@droso.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 22 Sep 2009, Erwin Lansing wrote: > Configuring an inet address on bge(4) to up the interface hangs the > system on todays RELENG_8 or leads to an instant reboot. The system > becomes completely unresponsive and I haven't managed to break into the > debugger. Disabling hw.bge.allow_asf fixes the symptoms. Some relevant > information about the hardware: > http://people.freebsd.org/~erwin/bge-20090922.txt I can confirm that this is still an issue on an DL385 (Opteron running i386) and setting hw.bge.allow_asf to 0 make it boot up. /Bjorn bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xf7ff0000-0xf7ffffff irq 28 at device 6.0 on pci3 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf7ff0000 bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus0: <MII bus> on bge0 bge0: bpf attached bge0: Ethernet address: 00:17:a4:8d:f9:2a bge0: [MPSAFE] bge0: [ITHREAD] bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xf7fe0000-0xf7feffff irq 29 at device 6.1 on pci3 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf7fe0000 bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus1: <MII bus> on bge1 bge1: bpf attached bge1: Ethernet address: 00:17:a4:8d:f9:29 bge1: [MPSAFE] bge1: [ITHREAD]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091002212131.U37424>