Date: Wed, 27 Jan 1999 02:00:05 -0500 (EST) From: Simon Shapiro <shimon@simon-shapiro.org> To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: freebsd-alpha@FreeBSD.ORG, Mark Salyzyn <salyzyn_mark@dpt.com> Subject: Re: Alpha/PCI Help Request Message-ID: <XFMail.990127020005.shimon@simon-shapiro.org> In-Reply-To: <13999.42675.900087.538238@grasshopper.cs.duke.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Andrew Gallatin, On 28-Jan-99 you wrote: > > Simon Shapiro writes: > > Hi Y'll > > * The PCI probe banner announces that the card is on int a, irq 0. > this > > does not look good to me. I have no idea how to set the IRQ, > other than > > what is done already in the driver (sys/pci/dpt_pci.c, and > > sys/dev/dpt/dpt_scsi.c) > > I assume you're on a machine that treats pci interrupts differently > than ISA interrupts (nearly everything but an AS200 or a multia)? If > so, then all's well. But the message should probably either have 16 > added to it so that it matches the output from vmstat -i, or it should > read 'int a PCI irq 0'... Yup. Same 164LX bugger. Who is fixing what? (i.e. vmstat, or the printf in the driver? > > * The system abort booting at this point, dropping back to the SRM > which > > says: > > > > halted CPU 0 > > > > halt code = 7 > > machine check while in PAL mode > > PC = 18400 > > boot failure > > >>> > > You *might* be able to get a meaningful ra out of the SRM console. > Try something like: > > >>>e -virtual ra > gpr: 1A ( R26) FFFFFC0000498560 I get; gpr: 1A ( R26) FFFFFC000036CA64 is that supposed to be meaningful? :-) Simon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.990127020005.shimon>