Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 25 Oct 2009 15:05:11 -0700
From:      David Ehrmann <ehrmann@gmail.com>
To:        Ivan Voras <ivoras@freebsd.org>
Cc:        pyunyh@gmail.com, freebsd-current@freebsd.org
Subject:   Re: Strange issue with Samba on 8.0rc1
Message-ID:  <6e0e5340910251505r15614b7bqb9d42c0055d8f940@mail.gmail.com>
In-Reply-To: <9bbcef730910251440y30c05f45w149a3e4ab06849df@mail.gmail.com>
References:  <4ADF70F1.5060300@gmail.com> <hbpaqv$3n4$1@ger.gmane.org> <4AE0DCDF.7090604@gmail.com> <20091023183708.GA6050@michelle.cdnetworks.com> <6e0e5340910231237v3f19b27ex1cbefd3f9a01af54@mail.gmail.com> <20091023194755.GC6050@michelle.cdnetworks.com> <20091023202604.GD6050@michelle.cdnetworks.com> <6e0e5340910231531n737ac71ds11a07117c3f7667e@mail.gmail.com> <6e0e5340910251429n7b95143emb9a97b29d329ab1c@mail.gmail.com> <9bbcef730910251440y30c05f45w149a3e4ab06849df@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Oct 25, 2009 at 2:40 PM, Ivan Voras <ivoras@freebsd.org> wrote:

>
> Sorry, but I can only give you generic ideas:
> - It is unlikely that the storage media (flash) with FreeBSD has
> errors in such a way that would cause this subtle error
>

I agree about the flash.  I would expect it to fail in blocks, and if it
were out of spare blocks, almost everything would be acting strange.  I can
probably test for this by comparing files in /usr/obj and /usr.

- Can you try a "known good" FreeBSD 8 configuration? I.e. from a Live
> CD or USB media? The "live" edition has csup and everything else you
> could need.
>

That's a good idea, and the next thing I'll try.

- Can you try a simple cheap "known good" NIC? I see that retail
> Realtek-based PCI NICs sell for less than $10.
>

I'd have to choose between PCI-E and USB, and the PCI-E is tricky because
the case doesn't have a cutout for it.  I did try the vr0 interface, too
(but not exclusively; I left the vge interface up), and it had the same
problems.  Since these things are usually wired directly to the Southbridge,
a problem in the Southbridge driver would show up with any PCI(E) device.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6e0e5340910251505r15614b7bqb9d42c0055d8f940>