Date: Sat, 23 Mar 2002 08:33:46 -0800 From: "Drew Tomlinson" <drew@mykitchentable.net> To: <stable@freebsd.org> Subject: Machine Lockups on 4.5-RELEASE Message-ID: <048501c1d288$8150b5a0$0301a8c0@bigdaddy>
next in thread | raw e-mail | index | archive | help
I have an AMD 486 DX-100 machine that has run flawlessly since
4.0-RELEASE. Although slow, I build custom kernels, and use ports to
build and install software. The software on this machine is minimal
as I use it for my firewall and to serve DHCP requests. Here is the
list of installed ports:
blacksheep# pkg_info
autoconf213-2.13.000227_1 Automatically configure source code on many
Un*x platforms
dhcping-1.1 Send DHCP request to DHCP server for monitoring
purposes
gettext-0.10.35_1 GNU gettext package
gmake-3.79.1 GNU version of 'make' utility
isakmpd-20020104 OpenBSD IKE daemon
isc-dhcp3-3.0.1.r6 ISC Dynamic Host Configuration Protocol client and
server c
libtool-1.3.4_2 Generic shared library support script
m4-1.4_1 GNU's m4
mpd-3.6 Multi-link PPP daemon based on netgraph(4)
pkg_tarup-1.2_3 Generates binary package from installed package
portupgrade-20020227 Very powerful FreeBSD ports/packages upgrading
tool and mor
ruby-1.6.7.2002.03.13 An object-oriented interpreted scripting
language
ruby-bdb1-0.1.6 Ruby interface to Berkeley DB revision 1.8x with
full featu
ruby-fnmatch-1.1b_1 A Ruby module which provides File::fnmatch and
File::FNM_*
ruby-optparse-0.8.6 Yet another command line option parser for Ruby
sharity-light-1.2 An userland smbfs --- SMB to NFS protocols
converter
snort-1.8.3 Lightweight network intrusion detection system
I've had no problems until upgrading from 4.4-RELEASE to 4.5-RELEASE.
Since the upgrade, my machine locks up occasionally when under heavy
load, doing things like compiling or updating to ports database. The
only thing I can do at this point is power off/on the machine.
I know at first this appears hardware related but I don't suspect it
is because it started right after the upgrade. Is there anything that
happened between 4.4 & 4.5 that could account for this? If so, has it
been fixed in -STABLE? If it helps, I'd be willing to revert to
4.4-RELEASE and see if the problem persists.
Thanks for any input,
Drew
dmesg output follows:
blacksheep# dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-RELEASE #3: Tue Jan 29 21:45:21 PST 2002
mylogin@blacksheep.mykitchentable.net:/usr/obj/usr/src/sys/BLACKSHEEP
Timecounter "i8254" frequency 1193852 Hz
CPU: AMD Enhanced Am486DX4 Write-Through (486-class CPU)
Origin = "AuthenticAMD" Id = 0x484 Stepping = 4
Features=0x1<FPU>
real memory = 50331648 (49152K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di cs0
config> en ed0
config> po ed0 0x240
config> ir ed0 9
config> iom ed0 0xd8000
config> f ed0 0
config> en ed1
config> po ed1 0x260
config> ir ed1 11
config> iom ed1 0xd0000
config> f ed1 0
config> q
avail memory = 45703168 (44632K bytes)
Preloaded elf kernel "kernel" at 0xc034f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034f09c.
netsmb_dev: loaded
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
isa0: too many dependant configs (8)
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 at port 0x240-0x25f iomem 0xd8000 irq 9 drq 0 on isa0
ed0: address 00:40:05:66:b2:55, type NE2000 (16 bit)
ed1 at port 0x260-0x27f iomem 0xd0000 irq 11 drq 0 on isa0
ed1: address 00:40:05:66:b2:52, type NE2000 (16 bit)
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, unlimited logging
IPsec: Initialized Security Association Processing.
ad0: 814MB <WDC AC2850F> [1654/16/63] at ata0-master BIOSPIO
ad1: 814MB <WDC AC2850F> [1654/16/63] at ata0-slave BIOSPIO
ad2: 4103MB <ST34342A> [8894/15/63] at ata1-master BIOSPIO
acd0: CDROM <CRD-8160B> at ata1-slave using BIOSPIO
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?048501c1d288$8150b5a0$0301a8c0>