Date: Fri, 2 Oct 2009 14:31:16 -0700 From: Ted Faber <faber@isi.edu> To: freebsd-current@freebsd.org Subject: Re: FreeBSD8-RELENG (sources from this morning) deadlock Message-ID: <20091002213116.GH88191@zod.isi.edu> In-Reply-To: <20090929041407.GA92280@zod.isi.edu> References: <20090929041407.GA92280@zod.isi.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
--jQIvE3yXcK9X9HBh Content-Type: multipart/mixed; boundary="ZYOWEO2dMm2Af3e3" Content-Disposition: inline --ZYOWEO2dMm2Af3e3 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Sep 28, 2009 at 09:14:07PM -0700, Ted Faber wrote: > I've been havinhard time getting this motherboard to work under FreeBSD > 8.0. It comes up fairly fine (though I didn't get the PATA disk > identified under 7-STABLE so it may also be shaky under 8), but after > between 3 and 10 minutes of running multi user it locks up hard, and > wont respond to input at all. No keyboard response, couldn't get into a > kernel debugger, nothing. I couldn't get a kernel dump for that reason. >=20 > However, when I bring the node up single user I'm able to do s full fsck > of the file systems - which is a 10 minute experience - without > deadlock. It doesn't ever seem to lock up single-user. >=20 > I booted a WITNESS/INVARIENTS/DIAGNOSTIC kernel on it today but didn't > get a whole lot of diagnostic info. I see one LOR as the system comes > up, a conflict between vfs_bio.c line 2559 and ufs_dirhash.c line 285, > which I've seen in other traces. >=20 > After a clean boot and as I'm shutting down, I see 2 LORs when unmounting= file > systems. The first is (ufs) vfs_mount.c 1200 and (devfs) ffs_vfsops.c > 1194 and the second is (ufs) vfs_mount.c 1200 and (syncer) vfs_subr.c > 2188. As I say it's difficult to capture the screen at this point, but > I'm happy to take pictures if the detailed traces would be a help. >=20 > That second reversal with the syncer holding one of the locks seems > suspicious to me. If the syncer is the source of the deadlock it would > explain the nondeterministic lock up times, and the lack of lockup > single user. >=20 > I've attached the dmesg from a verbose boot with the debug kernel. Any > ideas about how to get more information or what the problems might be > would be greatly appreciated. I'm still deadlocked, but trying to get more info. I tried a firewire debugging session using dcons, but that failed for reasons unclear. dconschat seems to do the right thing: --- musicbox:~$ sudo dconschat -v =E2=80=90br =E2=80=90G 12345 =E2=80=90t 00-00= -4c-01-00-00-3b-c7 dconschat: kvm_nlist: No such file or directory dcons_buf: 0xc0d74740 port 0 size offset gen pos output: 9184 56 1 1550 input : 3062 9240 0 106 port 1 size offset gen pos output: 3061 12302 0 0 input : 1021 15363 0 0 [dcons connected] (1)(1)(1)(1)(1) --- But the gdb fails to connect: ---- musicbox:~$ kgdb kernel GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain condition= s. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd"...(no debugging symbols fo= und)... (kgdb) target remote :12345 :12345: Connection refused. ---- Any help with this or the original query (dmesg attached) would be very appreciated. --=20 Ted Faber http://www.isi.edu/~faber PGP: http://www.isi.edu/~faber/pubkeys.= asc Unexpected attachment on this mail? See http://www.isi.edu/~faber/FAQ.html#= SIG --ZYOWEO2dMm2Af3e3 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RC1 #1: Mon Sep 28 09:03:11 PDT 2009 root@ylum.lunabase.org:/usr/obj/usr/src/sys/DEBUG WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc1175000. Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc11751d8. Preloaded elf module "/boot/kernel/sound.ko" at 0xc1175288. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3000127710 Hz CPU: AMD Athlon(tm) II X2 250 Processor (3000.13-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x100f62 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> TSC: P-state invariant Data TLB: 48 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x00000000cc4cdfff, 3406462976 bytes (831656 pages) avail memory = 3404414976 (3246 MB) Table 'FACP' at 0xcffb0200 Table 'APIC' at 0xcffb0390 MADT: Found table at 0xcffb0390 MP Configuration Table version 1.4 found at 0xc00fc2b0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled ACPI APIC Table: <051909 APIC2009> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f4ea0 pnpbios: Entry = f0000:664a Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf9580 00014 (v0 ACPIAM) ACPI: RSDT 0xcffb0000 0003C (v1 051909 RSDT2009 20090519 MSFT 00000097) ACPI: FACP 0xcffb0200 00084 (v1 051909 FACP2009 20090519 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0 0/1 20090521 tbfadt-655 ACPI: DSDT 0xcffb0440 0A5C4 (v1 1AAAA 1AAAA000 00000000 INTL 20051117) ACPI: FACS 0xcffbe000 00040 ACPI: APIC 0xcffb0390 0006C (v1 051909 APIC2009 20090519 MSFT 00000097) ACPI: MCFG 0xcffb0400 0003C (v1 051909 OEMMCFG 20090519 MSFT 00000097) ACPI: OEMB 0xcffbe040 00072 (v1 051909 OEMB2009 20090519 MSFT 00000097) ACPI: HPET 0xcffbaa10 00038 (v1 051909 OEMHPET 20090519 MSFT 00000097) ACPI: SSDT 0xcffbaa50 00458 (v1 A M I POWERNOW 00000001 AMD 00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface acpi0: <051909 RSDT2009> on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 pcibios: BIOS version 3.00 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc6b4f000 pa 0x1000 AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0 acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed ACPI HPET table warning: Sequence is non-zero (2) ACPI timer: 1/2 1/2 1/2 0/3 1/2 1/2 1/2 1/2 1/2 1/2 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 4 7 10 11 12 14 15 Validation 0 7 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 7 10 11 12 14 15 Validation 0 11 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 10 11 12 14 15 Validation 0 4 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1022, dev=0x9600, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x9602, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x9606, revid=0x00 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 18 found-> vendor=0x1022, dev=0x9607, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4390, revid=0x00 domain=0, bus=0, slot=17, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xa000, size 3, enabled map[14]: type I/O Port, range 32, base 0x9000, size 2, enabled map[18]: type I/O Port, range 32, base 0x8000, size 3, enabled map[1c]: type I/O Port, range 32, base 0x7000, size 2, enabled map[20]: type I/O Port, range 32, base 0x6000, size 4, enabled map[24]: type Memory, range 32, base 0xfe7ffc00, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=18, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[10]: type Memory, range 32, base 0xfe7fd000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe7ff800, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfe7fc000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfe7fb000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe7ff400, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4385, revid=0x3a domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x439c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 MSI supports 2 messages map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfe7f4000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x439d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4399, revid=0x00 domain=0, bus=0, slot=20, func=5 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type Memory, range 32, base 0xfe7fa000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xfe800000-0xfe9fffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x9614, revid=0x00 domain=0, bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[14]: type I/O Port, range 32, base 0xb000, size 8, enabled pcib1: requested I/O range 0xb000-0xb0ff: in range map[18]: type Memory, range 32, base 0xfe9f0000, size 16, enabled pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good map[24]: type Memory, range 32, base 0xfe800000, size 20, enabled pcib1: requested memory range 0xfe800000-0xfe8fffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x960f, revid=0x00 domain=0, bus=1, slot=5, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfe9e8000, size 14, enabled pcib1: requested memory range 0xfe9e8000-0xfe9ebfff: good pcib1: matched entry for 1.5.INTB pcib1: slot 5 INTB hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdfffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1 pci1: <multimedia, HDA> at device 5.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xfea00000-0xfeafffff pcib2: prefetched decode 0xfdf00000-0xfdffffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE6 - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xc800, size 8, enabled pcib2: requested I/O range 0xc800-0xc8ff: in range map[18]: type Memory, range 64, base 0xfeaff000, size 12, enabled pcib2: requested memory range 0xfeaff000-0xfeafffff: good map[20]: type Prefetchable Memory, range 64, base 0xfdff0000, size 16, enabled pcib2: requested memory range 0xfdff0000-0xfdffffff: good pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 18 pcib2: slot 0 INTA is routed to irq 18 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111DP PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfeaff000-0xfeafffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci2 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfeaff000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:25:11:41:af:03 re0: [MPSAFE] re0: [FILTER] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xd000-0xefff pcib3: memory decode 0xfeb00000-0xfebfffff pcib3: no prefetched decode pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE7 - AE_NOT_FOUND pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x197b, dev=0x2361, revid=0x02 domain=0, bus=3, slot=0, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe800, size 3, enabled pcib3: requested I/O range 0xe800-0xe807: in range map[14]: type I/O Port, range 32, base 0xe400, size 2, enabled pcib3: requested I/O range 0xe400-0xe403: in range map[18]: type I/O Port, range 32, base 0xe000, size 3, enabled pcib3: requested I/O range 0xe000-0xe007: in range map[1c]: type I/O Port, range 32, base 0xd800, size 2, enabled pcib3: requested I/O range 0xd800-0xd803: in range map[20]: type I/O Port, range 32, base 0xd400, size 4, enabled pcib3: requested I/O range 0xd400-0xd40f: in range map[24]: type Memory, range 32, base 0xfebfe000, size 13, enabled pcib3: requested memory range 0xfebfe000-0xfebfffff: good pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 pcib3: slot 0 INTA is routed to irq 19 atapci0: <JMicron JMB361 SATA300 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xd800-0xd803,0xd400-0xd40f mem 0xfebfe000-0xfebfffff irq 19 at device 0.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 50 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfebfe000 atapci0: AHCI called from vendor specific driver atapci0: AHCI v1.00 controller with 2 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ AL CLO 3Gbps PM PMD 32cmd 2ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect timeout status=00000000 ata2: AHCI reset done: phy reset found no device ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe800 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe400 ata3: reset tp1 mask=03 ostat0=60 ostat1=70 ata3: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata3: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata3: reset tp2 stat0=20 stat1=30 devices=0x0 ata3: [MPSAFE] ata3: [ITHREAD] atapci1: <ATI IXP700/800 SATA300 controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfe7ffc00-0xfe7fffff irq 22 at device 17.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6000 atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe7ffc00 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM supported atapci1: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 4ports ata4: <ATA channel 0> on atapci1 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 2> on atapci1 ata6: AHCI reset... ata6: hardware reset ... ata6: SATA connect timeout status=00000000 ata6: AHCI reset done: phy reset found no device ata6: [MPSAFE] ata6: [ITHREAD] ata7: <ATA channel 3> on atapci1 ata7: AHCI reset... ata7: hardware reset ... ata7: SATA connect timeout status=00000000 ata7: AHCI reset done: phy reset found no device ata7: [MPSAFE] ata7: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fe000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fd000 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe7ff800 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fc000 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 18 at device 19.1 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fb000 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci3 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0 ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe7ff400 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci2: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00 ata0: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci2: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci2: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 56 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at device 20.5 on pci0 ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe7fa000 ohci4: [MPSAFE] ohci4: [ITHREAD] usbus6: <OHCI (generic) USB controller> on ohci4 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc: atkbdc-1 already exists; skipping it driver bug: Unable to set devclass (devname: (null)) cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 cpu1: <ACPI CPU> on acpi0 atkbdc: atkbdc-1 already exists; skipping it driver bug: Unable to set devclass (devname: (null)) ahc_isa_probe 0: ioport 0xc00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 214309 -> 100000 procfs registered lapic: Divisor 2, Frequency 100004264 hz Timecounter "TSC" frequency 3000127710 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata1: Identifying devices: 00000001 ata1: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad2: setting PIO4 on IXP700/800 chip ad2: setting UDMA100 on IXP700/800 chip ad2: 238475MB <Seagate ST3250620A 3.AAD> at ata1-master UDMA100 ad2: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad2 ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen6.1: <ATI> at usbus6 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ad2: Silicon Image check3 failed ad2: Adaptec check1 failed ad2: LSI (v3) check1 failed ad2: LSI (v2) check1 failed ad2: FreeBSD check1 failed ata2: Identifying devices: 00000000 ata2: New devices: 00000000 ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ata6: Identifying devices: 00000000 ata6: New devices: 00000000 ata7: Identifying devices: 00000000 ata7: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 49 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51 msi: Assigning MSI IRQ 256 to local APIC 1 vector 52 WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub6: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered Root mount waiting for: usbus5 usbus2 Root mount waiting for: usbus5 usbus2 uhub2: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/label/root ct_to_ts([2009-09-29 02:39:53]) = 1254191993.000000000 start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled Expensive timeout(9) function: 0xc07324a0(0xc6f2b000) 0.004008889 s re0: link state changed to UP --ZYOWEO2dMm2Af3e3-- --jQIvE3yXcK9X9HBh Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.13 (FreeBSD) iEYEARECAAYFAkrGcSQACgkQaUz3f+Zf+XtGMQCeLkCBqzLHv9zazHHPkUBB3qVW u8wAnjAGoIzqwhIPjNuHJukBKjRSQm5X =5vVD -----END PGP SIGNATURE----- --jQIvE3yXcK9X9HBh--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091002213116.GH88191>