Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 May 2008 14:29:40 -0400
From:      Brodey Dover <pcfxer@rogers.com>
To:        gnome@freebsd.org
Cc:        Joe Marcus Clarke <marcus@freebsd.org>
Subject:   Re: How to configure policykit
Message-ID:  <4831C714.70604@rogers.com>
In-Reply-To: <4831C20E.8070904@freebsd.org>
References:  <4830190F.5090104@rogers.com> <48307B68.7090007@freebsd.org>	 <4830A007.5040209@rogers.com> <1211170971.23315.3.camel@shumai.marcuscom.com> <48319D11.405@rogers.com> <4831A60A.2020707@freebsd.org> <4831BCD6.9090205@rogers.com> <4831C20E.8070904@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Okay this is what I have then :

I start gnome using gdm via gnome_enable. Which then should mean I don't 
need to do any other configuration...but that is not the case so, I 
check to see if ck is working:

%ck-list-sessions
Session1:
    uid = '1001'
    realname = 'Brodey Dover'
    seat = 'Seat1'
    session-type = ''
    active = TRUE
    x11-display = ':0'
    x11-display-device = '/dev/ttyv8'
    display-device = ''
    remote-host-name = ''
    is-local = TRUE
    on-since = '2008-05-19T17:56:12Z'

ck seems to be working fine. sysctl disk stuff:

0 DISK da1 1023934464 512 hd 64 sc 32
1 MBR da1s2 941681152 512 i 1 o 82252800 ty 11
2 LABEL msdosfs/IPOD 941681152 512 i 0 o 0
0 DISK ad4 320072933376 512 hd 16 sc 63
1 MBR ad4s2 266383434240 512 i 1 o 53686886400 ty 165
2 BSD ad4s2f 257849426432 512 i 5 o 8534007808 ty 7
2 BSD ad4s2e 536870912 512 i 4 o 7997136896 ty 7
2 BSD ad4s2d 3202351104 512 i 3 o 4794785792 ty 7
2 BSD ad4s2c 266383434240 512 i 2 o 0 ty 0
2 BSD ad4s2b 4257914880 512 i 1 o 536870912 ty 1
2 BSD ad4s2a 536870912 512 i 0 o 0 ty 7
1 MBR ad4s1 53686854144 512 i 0 o 32256 ty 7

FSTAB:

%cat /etc/fstab
# Device        Mountpoint    FStype    Options        Dump    Pass#
/dev/ad4s2b        none        swap    sw        0    0
/dev/ad4s2a        /        ufs    rw        1    1
/dev/ad4s2e        /tmp        ufs    rw        2    2
/dev/ad4s2f        /usr        ufs    rw        2    2
/dev/ad4s2d        /var        ufs    rw        2    2
/dev/acd0        /cdrom        cd9660    ro,noauto    0    0
proc            /proc        procfs    rw        0    0

Mounting using mount dock-applet:

Error org.freedesktop.DBus.Error.AccessDenied.
...(rejected message had interface "org.freedesktop.Hal.Device.Volume" 
member "Mount" error name "(unset)" destination "org.freedesktop.Hal")

DMESG:

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #2: Tue Apr 29 16:11:18 EDT 2008
    Brodey@Brodey.doverosx.com:/usr/obj/usr/src/sys/DOVER0
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2100.02-MHz 
686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
  
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
real memory  = 2146304000 (2046 MB)
avail memory = 2082357248 (1985 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Apr 29 2008 16:11:01)
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on 
acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at 
device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at 
device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
umass0: <USB 2.0 Flash Disk, class 0/0, rev 2.00/30.00, addr 2> on uhub1
umass1: <Apple iPod, class 0/0, rev 2.00/0.02, addr 3> on uhub1
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 
0xfe02d000-0xfe02dfff irq 20 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 
0xfe02c000-0xfe02cfff irq 21 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 
0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f 
mem 0xfe02b000-0xfe02bfff irq 22 at device 5.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, audio> at device 7.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 
0xfdeff000-0xfdeff0ff irq 18 at device 8.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0e:2e:bd:d8:03
rl0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci2: <ACPI PCI bus> on pcib2
nvidia0: <GeForce 7600 GT> port 0x9c00-0x9c7f mem 
0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16 
at device 0.0 on pci2
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 
2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <ASUS DRW-1612BL/1.10> at ata0-master UDMA33
ad4: 305245MB <Seagate ST3320620AS 3.AAC> at ata2-master SATA300
GEOM_LABEL: Label for provider acd0 is iso9660/TDU.
SMP: AP CPU #1 Launched!
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Apple iPod 1.62> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 976MB (1999872 512 byte sectors: 64H 32S/T 976C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB 2.0 Flash Disk 3000> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 123MB (252928 512 byte sectors: 64H 32S/T 123C)
GEOM_LABEL: Label for provider da0s1 is msdosfs/OPPO.
GEOM_LABEL: Label for provider da1s2 is msdosfs/IPOD.
Trying to mount root from ufs:/dev/ad4s2a
rl0: link state changed to UP
sblive0: [ITHREAD]
sblive0: <SB Audigy2 Value> port 0xac00-0xac3f irq 17 at device 7.0 on pci1
rl0: link state changed to DOWN
rl0: link state changed to UP
umass0: at uhub1 port 5 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
GEOM_LABEL: Label msdosfs/OPPO removed.
umass0: detached
umass0: <USB 2.0 Flash Disk, class 0/0, rev 2.00/30.00, addr 2> on uhub1
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB 2.0 Flash Disk 3000> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 123MB (252928 512 byte sectors: 64H 32S/T 123C)
GEOM_LABEL: Label for provider da0s1 is msdosfs/OPPO.

GNOME MOUNT:

gnome-mount --block --no-ui --verbose --hal-udi 
/org/freedesktop/Hal/devices/volume_uuid_FC4A_C262
gnome-mount 0.8
** (gnome-mount:2382): DEBUG: Mounting 
/org/freedesktop/Hal/devices/volume_uuid_FC4A_C262
** (gnome-mount:2382): DEBUG: read default option 'longnames' from gconf 
strlist key /system/storage/default_options/vfat/mount_options
** (gnome-mount:2382): DEBUG: read default option '-u=' from gconf 
strlist key /system/storage/default_options/vfat/mount_options
** (gnome-mount:2382): DEBUG: Mounting 
/org/freedesktop/Hal/devices/volume_uuid_FC4A_C262 with 
mount_point='OPPO', fstype='', num_options=2
** (gnome-mount:2382): DEBUG:   option='longnames'
** (gnome-mount:2382): DEBUG:   option='-u=1001'
** Message: Mount failed for 
/org/freedesktop/Hal/devices/volume_uuid_FC4A_C262
org.freedesktop.DBus.Error.AccessDenied : A security policy in place 
prevents this sender from sending this message to this recipient, see 
message bus configuration file (rejected message had interface 
"org.freedesktop.Hal.Device.Volume" member "Mount" error name "(unset)" 
destination "org.freedesktop.Hal")



      







Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4831C714.70604>