Date: Sat, 23 Mar 2002 19:59:49 +0100 From: dak <aurelien.nephtali@wanadoo.fr> To: stable@freebsd.org Subject: Sound problems Message-ID: <20020323185949.GA941@mars>
next in thread | raw e-mail | index | archive | help
--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi,
Since FreeBSD 4.2 i have a sound problem with my laptop, it doesn't work :<
As I'm on a laptop, i can't modifiy anything in the BIOS (just date, boot order ans stuff like that)
I have attached the dmesg, if somebody knows what to do or somebody can point me to doc/tuto a where
i can learn how to debug a 'hardware' problem i'll be happy :).
my laptop is Compaq Presario 12XL408 Serie 1200, i'm on 4.5-STABLE.
Thanks.
-- dak
--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Wed Mar 13 12:24:39 CET 2002
dak@mars:/usr/obj/usr/src/sys/laptop
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (697.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 129957888 (126912K bytes)
avail memory = 123428864 (120536K bytes)
Preloaded elf kernel "kernel" at 0xc0310000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fdf70
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8601)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8520 VGA-compatible display device> at 0.0 irq 9
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x1420-0x142f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 11
isab1: <PCI to ISA bridge (vendor=1106 device=3057)> at device 7.4 on pci0
pcm0: <VIA VT82C686A> irq 9 at device 7.5 on pci0
pcm0: cannot allocate bus resource.device_probe_and_attach: pcm0 attach returned 6
pci0: <unknown card> (vendor=0x14f1, dev=0x2013) at 9.0 irq 11
pci_cfgintr_linked: linked (2) to hard-routed irq 9
pci_cfgintr: 0:10 INTA routed to irq 9
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x484 irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
ad0: 9590MB <FUJITSU MHM2100AT> [19485/16/63] at ata0-master UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-7002Bc> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0
ed1 at port 0x240-0x25f irq 9 flags 0x80010 slot 0 on pccard0
ed1: address 00:e0:98:73:6f:27, type Linksys (16 bit)
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
--Nq2Wo0NMKNjxTN9z--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020323185949.GA941>