Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 9 Mar 2013 19:12:52 +0100
From:      Daniel Nebdal <dnebdal@gmail.com>
To:        Yasir hussan <kolyasir@gmail.com>
Cc:        Zaphod Beeblebrox <zbeeble@gmail.com>, Current <freebsd-current@freebsd.org>
Subject:   Re: multi-homing in freebsd
Message-ID:  <CA%2Bt49PJnQW-0jND4sjiQPzn%2Ba%2BX5YAQo_k5jgOmR-KEJDphbtQ@mail.gmail.com>
In-Reply-To: <CAMwCe3QXarU%2BRh5qJWF-oY9aZiM_%2BY=2EcG02QAHVuq_mkOeuQ@mail.gmail.com>
References:  <CAMwCe3T1f8Ze8AnS%2BAXzPxatH522qUH0brGTE5ZmduxazPyivA@mail.gmail.com> <CAMwCe3QgcQeL=yhxAkNLxKLESHJkRrMT=sFKds_Gqa29KQ_Atw@mail.gmail.com> <CACpH0Mf=sxF8eFVeSA9FMBHv-PpreFPD5LKzLE90xQxP2TBAKg@mail.gmail.com> <CAMwCe3SXygBW1seqiJuB9vGTpHJLs1udsPZ2%2B3hjm5dK5du2-g@mail.gmail.com> <CA%2Bt49PJ0AarR%2Bdtc3dRfCg=ZmRHA730gCah3ZqBobFdVBmhJCg@mail.gmail.com> <CAMwCe3QXarU%2BRh5qJWF-oY9aZiM_%2BY=2EcG02QAHVuq_mkOeuQ@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Oh, you specifically need them to have different interfaces? That's a
bit more complicated. I guess you could rig something with netgraph
(ngctl and such), but I'm not familiar with it...

--
Daniel Nebdal

On Sat, Mar 9, 2013 at 2:57 PM, Yasir hussan <kolyasir@gmail.com> wrote:
> i want to have differnet ips`s and each should have different interface, it
> could be a virtual interface. like u can made it like
>
> ifconfig arge0.1 create
>
> but each ip should able to access from differnet machine
>
> On Sat, Mar 9, 2013 at 7:29 AM, Daniel Nebdal <dnebdal@gmail.com> wrote:
>>
>> Going by Zaphod's recommendation of using a /32 for each IP, how about
>> this?
>>
>> ifconfig arge0 inet 192.168.1.100/32
>> ifconfig arge0 alias 192.169.1.100/32
>>
>> I wouldn't recommend 192.169, though - only 192.168.x.x is reserved
>> for private networks, and 192.169 is a valid IP-routable prefix,
>> assigned to some US company.
>> To be exact: The ranges from RFC1918 are 10.0.0.0/8, 172.16.0.0 /20
>> and 192.168.0.0/24.
>>
>> On Sat, Mar 9, 2013 at 9:57 AM, Yasir hussan <kolyasir@gmail.com> wrote:
>> > Kindly will u give me example with cammand line, which can test on my
>> > freebsd machine, i want two ips 192.168.1.100 and 192.169.1.100 to be
>> > work
>> > on single network interface, my default interface for network is arge0
>> >
>> > On Sat, Mar 9, 2013 at 3:08 AM, Zaphod Beeblebrox <zbeeble@gmail.com>
>> > wrote:
>> >
>> >> On Sat, Mar 9, 2013 at 3:04 AM, Yasir hussan <kolyasir@gmail.com>
>> >> wrote:
>> >>
>> >>> i just want to run multiple IPs for single network card in freebsd
>> >>>
>> >>>
>> >> OK.  A better question.  About the only caution I can give here
>> >> (assuming
>> >> you don't mean something more interesting like vlans and whatnot) is
>> >> that
>> >> if both IP addresses are on the SAME network, use a /32 as the netmask
>> >> (it
>> >> works better).  If they are on different networks, specify the netmask
>> >> as
>> >> normal.
>> >>
>> >> You may, at this point,  need a method to choose which IP address to
>> >> use
>> >> for any particular connection.  There's a pile of documentation waiting
>> >> for
>> >> you.
>> >>
>> >>
>> > _______________________________________________
>> > freebsd-current@freebsd.org mailing list
>> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
>> > To unsubscribe, send any mail to
>> > "freebsd-current-unsubscribe@freebsd.org"
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2Bt49PJnQW-0jND4sjiQPzn%2Ba%2BX5YAQo_k5jgOmR-KEJDphbtQ>