Date: Sun, 29 Apr 2007 11:40:17 +0200 From: Marc Fonvieille <blackend@freebsd.org> To: Mark Mumby <mmumby@xtra.co.nz> Cc: freebsd-questions@freebsd.org Subject: Re: Serial Converter Message-ID: <20070429094017.GA13702@abigail.blackend.org> In-Reply-To: <HJEFJHALJBPCMDFBKJGOEELMCDAA.mmumby@xtra.co.nz> References: <HJEFJHALJBPCMDFBKJGOEELMCDAA.mmumby@xtra.co.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Apr 29, 2007 at 08:31:54PM +1200, Mark Mumby wrote: > Hello, > > I am currently running 5.4 release and i have problems with a usb serial > converter (a FDTI version). > > When i do a usbdev -v i get - > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > SiS(0x0000), rev 1.00 > port 1 addr 2: full speed, self powered, config 1, Standard USB > Hub(0x3301), Atmel(0x03eb), rev 3.00 > port 1 powered > port 2 powered > port 3 addr 3: full speed, power 44 mA, config 1, USB to Serial > Converter(0x0421), Generic(0x0b39), rev 2.00 > port 4 powered > > In usbdev there is - > -- vendor part -- > vendor SIIG2 0x0b39 SIIG > > -- known products part -- > product SIIG2 US2308 0x0421 USB to Serial > > uftdi.c also seems to be aware of it - > if (uaa->vendor == USB_VENDOR_SIIG2 && > (uaa->product == USB_PRODUCT_SIIG2_US2308)) > > Everything seems to be there but for some reason i get the ugen driver which > does not work. Is uftdi.ko loaded? The command: kldstat -v | uftdi should gives something. If it's not the case you'll have to load uftdi(4) by hand or via /boot/loader.conf facility. -- Marc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070429094017.GA13702>