Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 25 Apr 2004 00:56:50 +0200
From:      Cyrille Lefevre <cyrille.lefevre@laposte.net>
To:        FreeBSD-gnats-submit@FreeBSD.org
Subject:   kern/65944: no console at boot time
Message-ID:  <20040424225649.GA34672@gits.dyndns.org>
Resent-Message-ID: <200404242300.i3ON0XaG005731@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         65944
>Category:       kern
>Synopsis:       no console at boot time
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Apr 24 16:00:32 PDT 2004
>Closed-Date:
>Last-Modified:
>Originator:     Cyrille Lefevre
>Release:        FreeBSD 5.2-CURRENT i386
>Organization:
ACME
>Environment:
System: FreeBSD gits 5.2-CURRENT FreeBSD 5.2-CURRENT #14: Mon Apr 19 05:29:50 CEST 2004 root@gits:/disk3/freebsd/current/obj/disk3/freebsd/current/src/sys/CUSTOM i386
OSRelDate: 502112
>Description:
	at boot time, while the kernel is loaded, while the start (-/|\)
	usually turns, it stop to turn and the pc console isn't accessible
	until /etc/rc.d/syscons is run. I don't see the Copyright notices.
	the only thing which happen is that the screen flash during the
	vesa initialisation. for instance, I've set-up a serial console to
	solve boot time problems, but I don't know how to fix this one !
	this problem also occur with the GENERIC kernel.

	I've booted w/ and w/o hint.atkbd.0.flags="0x1" with no luck.

	last cvsup/update/buildworld/buildkernel is from Sat, Apr 17, 2004.
>How-To-Repeat:
	boot
>Fix:
----------==========---------- device.hints ----------==========----------
# $FreeBSD$
exec=".( Loading /boot/device.hints ) cr"
# CUSTOM
hint.apm.0.at="nexus"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
# 0x01 Force detection of keyboard, else we always assume a keyboard
hint.atkbd.0.flags="0x1"
hint.vga.0.at="isa"
hint.sc.0.at="isa"
# 0x100 Probe for a keyboard device periodically if one is not present
hint.sc.0.flags="0x100"
hint.joy.0.at="isa"
hint.joy.0.port="0x201"
hint.sio.0.at="isa"
hint.sio.0.port="0x3F8"
hint.sio.0.irq="4"
# 0x00010 device is potential system console
# 0x00020 device is forced to become system console
# 0x20000 device is assumed to use a 16650A-type chip
hint.sio.0.flags="0x20030"
hint.sio.1.at="isa"
hint.sio.1.port="0x2F8"
hint.sio.1.irq="3"
hint.sio.1.flags="0x20000"
hint.fdc.0.at="isa"
hint.fdc.0.port="0x3F0"
hint.fdc.0.irq="6"
hint.fdc.0.drq="2"
hint.fdc.0.flags="0x0"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.fd.0.flags="0x0"
hint.fd.1.at="fdc0"
hint.fd.1.drive="1"
hint.fd.1.flags="0x0"
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
hint.pca.0.at="isa"
hint.pca.0.disabled="1"
hint.pca.0.port="0x040"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.npx.0.at="nexus"
hint.npx.0.port="0x0F0"
hint.npx.0.irq="13"
hint.npx.0.flags="0x0"
hint.ata.0.at="isa"
hint.ata.0.port="0x1F0"
hint.ata.0.irq="14"
hint.ata.1.at="isa"
hint.ata.1.port="0x170"
hint.ata.1.irq="15"
hint.scbus.0.at="sym0"
hint.scbus.1.at="ahc0"
# GENERIC
hint.adv.0.at="isa"
hint.adv.0.disabled="1"
hint.aha.0.at="isa"
hint.aha.0.disabled="1"
hint.aic.0.at="isa"
hint.aic.0.disabled="1"
hint.bt.0.at="isa"
hint.bt.0.disabled="1"
hint.cs.0.at="isa"
hint.cs.0.disabled="1"
hint.cs.0.port="0x300"
hint.ed.0.at="isa"
hint.ed.0.disabled="1"
hint.ed.0.irq="10"
hint.ed.0.maddr="0xd8000"
hint.ed.0.port="0x280"
hint.fe.0.at="isa"
hint.fe.0.disabled="1"
hint.fe.0.port="0x300"
hint.ie.0.at="isa"
hint.ie.0.disabled="1"
hint.ie.0.irq="10"
hint.ie.0.maddr="0xd0000"
hint.ie.0.port="0x300"
hint.lnc.0.at="isa"
hint.lnc.0.disabled="1"
hint.lnc.0.drq="0"
hint.lnc.0.irq="10"
hint.lnc.0.port="0x280"
hint.pcic.0.at="isa"
hint.pcic.0.disabled="1"
# hint.pcic.0.irq="10"
hint.pcic.0.maddr="0xd0000"
hint.pcic.0.port="0x3e0"
hint.pcic.1.at="isa"
hint.pcic.1.disabled="1"
hint.pcic.1.irq="11"
hint.pcic.1.maddr="0xd4000"
hint.pcic.1.port="0x3e2"
hint.sio.2.at="isa"
hint.sio.2.disabled="1"
hint.sio.2.irq="5"
hint.sio.2.port="0x3E8"
hint.sio.3.at="isa"
hint.sio.3.disabled="1"
hint.sio.3.irq="9"
hint.sio.3.port="0x2E8"
hint.sn.0.at="isa"
hint.sn.0.disabled="1"
hint.sn.0.irq="10"
hint.sn.0.port="0x300"
hint.vt.0.at="isa"
hint.vt.0.disabled="1"
----------==========---------- loader.conf.local ----------==========----------
# This file now contains just the overrides from /boot/defaults/loader.conf
# please make all changes to this file.

exec=".( Loading /boot/loader.conf.local ) cr"

# -- sysinstall generated deltas -- #

#password="ashblas"

##############################################################
###  Basic configuration options  ############################
##############################################################

userconfig_script_load="YES"
verbose_loading="YES"

##############################################################
###  Splash screen configuration  ############################
##############################################################

splash_bmp_load="YES"
vesa_load="YES"		# configured
bitmap_load="YES"
# bitmap_name="/boot/splash/chuck_nebula.bmp"
bitmap_name="/boot/splash/daemon_640.bmp"
# bitmap_name="/boot/splash/dual_chuck-40.bmp"
# bitmap_name="/boot/splash/saturn_1_640.bmp"
bitmap_type="splash_image_data"

##############################################################
###  Loader settings  ########################################
##############################################################

currdev="disk5s1a"
root_disk_unit="0"
rootdev="disk5s1a"

##############################################################
###  Kernel settings  ########################################
##############################################################

# boot_single="YES"
# boot_verbose="YES"

##############################################################
###  Kernel tunables  ########################################
##############################################################

# hw.atamodes=dma,dma,dma,dma
# hw.ata.atapi_dma=1
# hw.ata.ata_dma=0
# hw.ata.wc=1
# hw.ata.tags=1

##############################################################
###  Hidden kernel tunables  #################################
##############################################################

# kern.hz=100
# kern.maxswzone=70*1024*1024
# kern.maxbcache=200*1024*1024
# kern.maxtsiz=128*1024*1024
# kern.dfldsiz=128*1024*1024
# kern.maxdsiz=512*1024*1024
# kern.dflssiz=8*1024*1024
# kern.maxssiz=64*1024*1024
# kern.sgrowsiz=128*1024
# kern.maxusers=physpages/(2*1024*1024/4096) # PAGE_SIZE
# kern.maxproc=20+16*maxusers
# kern.maxfiles=maxproc*2
# kern.ipc.nsfbufs=512+maxusers*16
# kern.nbuf=0
# kern.ncallout=16+maxproc+maxfiles
# kern.vm.kmem.size=200*1024*1024
kern.ipc.shmmni=256

##############################################################
###  Filesystem and related modules  #########################
##############################################################

#linprocfs_load="YES"	# fstab
#procfs_load="YES"	# fstab
#pseudofs_load="YES"	# autoloaded

##############################################################
###  Emulation modules  ######################################
##############################################################

#linux_load="YES"	# rc.d

##############################################################
###  Networking drivers  #####################################
##############################################################

#miibus_load="YES"	# autoloaded
#if_ep_load="YES"	# rc.d
#if_xl_load="YES"	# rc.d

##############################################################
###  Sound modules  ##########################################
##############################################################

#snd_pcm_load="YES"	# rc.local.d
#snd_sbc_load="YES"	# rc.local.d
#snd_sb16_load="YES"	# rc.local.d

##############################################################
###  Other modules  ##########################################
##############################################################

apm_load="YES"		# configured
#speaker_load="YES"	# configured
#ipfw_load="YES"	# configured
#pfsync_load="YES"
#pflog_load="YES"
#pf_load="YES"
#bktr_load="YES"
#lpt_load="YES"		# configured
#random_load="YES"	# configured
----------==========---------- CUSTOM ----------==========----------
#	$Id: CUSTOM 5-current root@gits.dyndns.org Sat Apr 17 01:47:15 CEST 2004
#
#	CUSTOM -- Gataway 2000 P5-200
#

machine		i386

cpu		I586_CPU		# aka Pentium

ident		CUSTOM
#hints		"CUSTOM.hints"

# maxusers	128

# === OPTIONS ===

# --- cpu ---

#options	HZ=1000

options 	CPU_SUSP_HLT

#options	PQ_CACHESIZE=512

#options 	CLK_USE_I8254_CALIBRATION
#options 	CLK_USE_TSC_CALIBRATION

# --- config ---

# strings -n 3 /kernel | sed -ne 's/^___//p'
options 	INCLUDE_CONFIG_FILE

# --- scheduler ---

#options 	SCHED_4BSD
options		SCHED_ULE

# --- compat ---

options 	COMPAT_43
options 	COMPAT_FREEBSD4

options 	SYSVSHM
options 	SYSVSEM
options 	SYSVMSG

# --- emul ---

options 	COMPAT_AOUT		# mod: aout req: gzip
#options 	COMPAT_LINUX		# mod: linux

#options 	COMPAT_SVR4		# mod: svr4
#device		streams			# mod: streams

#options 	IBCS2			# mod: ibcs2 ibcs2_coff

# --- posix ---

options 	P1003_1B_SEMAPHORES
options 	_KPOSIX_PRIORITY_SCHEDULING

# --- debug ---

options 	DDB
#options	DDB_UNATTENDED
options 	KTRACE
#options 	INVARIANTS
#options 	INVARIANT_SUPPORT
#options 	WITNESS
#options 	WITNESS_SKIPSPIN
#options 	DIAGNOSTIC
#options 	PERFMON
options		SW_WATCHDOG

# --- network ---

options 	INET
options 	INET6

options 	IPSEC
options 	IPSEC_ESP
#options 	FAST_IPSEC
#options	CRYPTO

#options 	NETGRAPH		# mod: netgraph

#options 	MROUTING		# mod: ip_mroute req: PIM
#options	PIM			# dep: MROUTING

#options 	IPFIREWALL		# mod: ipfw req: dummynet
#options 	IPFIREWALL_VERBOSE	# mod: ipfw
##options 	IPFIREWALL_VERBOSE_LIMIT=100	# mod: ipfw
##options 	IPFIREWALL_DEFAULT_TO_ACCEPT	# mod: ipfw

#options 	IPV6FIREWALL		# mod: ip6fw
#options 	IPV6FIREWALL_VERBOSE	# mod: ip6fw
##options 	IPV6FIREWALL_VERBOSE_LIMIT=100
##options 	IPV6FIREWALL_DEFAULT_TO_ACCEPT

options 	IPDIVERT

#options 	IPFILTER		# mod: ipfilter
#options 	IPFILTER_LOG		# mod: ipfilter
#options	IPFILTER_DEFAULT_BLOCK	# mod: ipfilter

options		PFIL_HOOKS		# req: pf

options 	IPSTEALTH

options 	RANDOM_IP_ID		# req: pf

#options	ACCEPT_FILTER_DATA	# mod: accf_data
#options	ACCEPT_FILTER_HTTP	# mod: accf_http

#options 	TCPDEBUG

options 	TCP_DROP_SYNFIN
#options 	TCP_RESTRICT_RST

#options 	DUMMYNET		# mod: dummynet
#options 	BRIDGE

#options	DEVICE_POLLING

#options	NETSMB			# mod: smbfs req: libmchain libiconv smbfs
#options	NETSMBCRYPTO		# mod: smbfs dep: netsmb
##options	LIBMCHAIN		# mod: libmchain dep: netsmb
#options	LIBICONV		# mod: libiconv dep: netsmb

# --- security ---

#options	MAC

# --- filesystem ---

#options		GEOM_SUNLABEL
#options		DIRECTIO

options 	FFS
options 	SOFTUPDATES
#options	UFS_ACL			# dep: ufs_extattr
options 	UFS_DIRHASH
#options	UFS_EXTATTR		# req: ufs_acl ufs_extattr_autostart
#options	UFS_EXTATTR_AUTOSTART	# dep: ufs_extattr
#options 	QUOTA
#options 	SUIDDIR

#options 	MFS			# mod: mfs
#options 	MD_ROOT			# mod: md
#device		md			# mod: md

#options 	BOOTP
#options 	BOOTP_NFSROOT
#options 	BOOTP_NFSV3
#options 	BOOTP_COMPAT
##options 	BOOTP_WIRED_TO=ep0

#options 	NFSSERVER		# mod: nfsserver
#options 	NFSCLIENT		# mod: nfsclient
#options 	NFS_ROOT

#options 	CD9660			# mod: cd9660
#options	CD9660_ICONV		# mod: cd9660_iconv
#options 	CD9660_ROOT
#options	UDF			# mod: udf
#options	UDF_ICONV		# mod: udf_iconv

#options 	NODEVFS
#options 	EXT2FS			# mod: ext2fs
#options 	FDESCFS			# mod: fdesc

#options 	MSDOSFS			# mod: msdosfs
#options	MSDOSFS_ICONV		# mod: msdosfs_iconv
#options 	NTFS			# mod: ntfs
#options	NTFS_ICONV		# mod: ntfs_iconv
#options 	NWFS			# mod: nwfs

#options 	NULLFS			# mod: nullfs
##options 	NULLFS_DIAGNOSTIC

#options 	PORTALFS		# mod: portalfs
#options 	PROCFS			# mod: procfs
#options	PSEUSOFS		# mod: pseudofs

#options	SMBFS			# mod: smbfs dep: netsmb

#options 	UMAPFS			# mod: umapfs
##options 	UMAPFS_DIAGNOSTIC

#options 	UNIONFS			# mod: unionfs
##options 	UNIONFS_DIAGNOSTIC

# --- misc ---

options 	MSGBUF_SIZE=65536
options 	SHOW_BUSYBUFS

#options	NBUF=0
#options	NMBCLUSTERS=8192
#options	NMBUFS=4096

# === ISA ===

device		isa

# --- power ---

#device		apm	# flags 0x20	# mod: apm
device		pmtimer

# --- keyboard ---

device		atkbdc
device		atkbd	# flags 0x1
options 	KBD_INSTALL_CDEV

# --- graphic ---

device		vga
#options 	VESA			# mod: vesa

# --- console ---

device		sc	# flags 0x100
options 	MAXCONS=8
#options	SC_CUT_SEPCHARS=" "
options 	SC_CUT_SPACES2TABS
#options	SC_DISABLE_DDBKEY
#options	SC_DISABLE_REBOOT
options 	SC_HISTORY_SIZE=250

# --- joystick ---

#device		joy			# mod: joy

# --- serial ---

device		sio
#device		nmdm			# mod: nmdm

# --- floppy ---

device		fdc			# mod: fdc

# --- parallel ---

device		ppc			# req: ppbus
device		ppbus			# mod: ppbus dep: ppc req: lpt
device		lpt			# mod: lpt dep: ppc ppbus

# --- sound ---

#device		pcm			# mod: snd_pcm req: sbc sb16
#device		sbc			# mod: snd_sbc dep: pcm req: sb16
#device		sb			# mod: snd_sb16 dep: pcm sbc

# --- speaker ---

#device		pca

# --- network ---

#device		ep			# mod: if_ep
#device		miibus			# mod: miibus req: xl
#device		xl			# mod: if_xl dep: miibus

# --- mouse ---

device		psm

# --- fpu ---

device		npx	# flags 0x0 iosiz 0x0

# === PCI ===

device		pci
#options 	PCI_QUIET

# --- video ---

#device		smbus			# req: bktr
#device		iicbus			# req: bktr
#device		iicbb			# req: bktr dep: iicbus
#device		bktr			# mod: bktr dep: smbus iicbus iicbb
#options	BKTR_USE_FREEBSD_SMBUS

# --- scsi ---

device		ahc			# mod: ahc
options 	AHC_ALLOW_MEMIO
options 	AHC_REG_PRETTY_PRINT

device		sym			# mod: sym
#options	SYM_SETUP_SCSI_DIFF	# 895 (U2W) 896 897
					# 825a 875 (F) 876 885 ?

#device		trm

# --- atapi ---

device		ata

# === SCSI ===

device		scbus

options 	CAMDEBUG
options 	SCSI_DELAY=5000
#options 	SCSI_NO_SENSE_STRINGS
#options 	SCSI_NO_OP_STRINGS
options 	SES_ENABLE_PASSTHROUGH

device		cd
#device		ch
device		da
device		pass
#device		ses
device		pt
device		sa
#device		targ
#device		targbh

# === ATAPI ===

options 	ATA_STATIC_ID

device		atadisk
device		ataraid
device		atapicd
#device		atapifd
#device		atapist
device		atapicam

# === PSEUDOS ===

# --- network ---

device	bpf
#device	disc			# mod: if_disc
device	ether
device	loop
#device	sl			# mod: if_sl
#device	tap			# mod: if_tap
#device	tun			# mod: if_tun req: ppp
#device	vlan			# mod: if_vlan
#device	wlan			# mod: wlan

#device	faith			# mod: if_faith req: inet6
#device	gif			# mod: if_gif req: inet6
#device	stf			# mod: if_stf req: inet6

#device	gre			# mod: if_gre req: pf
#device	pf			# mod: pf dep: gre req: pflog pfsync
#device	pflog			# mod: pflog dep: pf
#device	pfsync			# mod: pfsync dep: pf

#device	ppp			# mod: if_ppp req: pppd
#options 	PPP_BSDCOMP	# mod: if_ppp
#options 	PPP_DEFLATE	# mod: if_ppp
#options 	PPP_FILTER	# mod: if_ppp dep: bpf

# --- misc ---

#device	ccd			# mod: ccd
device	gzip			# dep: aout
device	pty
device	random			# mod: random
#device	snp			# mod: snp
device	speaker			# mod: speaker
device	splash			# req: splash_* *_saver
#device	vinum			# mod: vinum
#device	vn			# mod: vn

# eof
----------==========---------- dmesg.boot ----------==========----------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #14: Mon Apr 19 05:29:50 CEST 2004
    root@gits:/disk3/freebsd/current/obj/disk3/freebsd/current/src/sys/CUSTOM
can't re-use a leaf (nsfbufs)!
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0826000.
Preloaded elf module "/boot/modules/vesa.ko" at 0xc0826164.
Preloaded elf module "/boot/modules/apm.ko" at 0xc0826210.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (198.95-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 134217728 (128 MB)
avail memory = 121761792 (116 MB)
Intel Pentium detected, installing workaround for F00F bug
random: <entropy source, Software, Yarrow>
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc081d302 (1000022)
VESA: Matrox Graphics Inc.
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX WDMA2 controller> at device 7.1 on pci0
atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0
atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0
atapci0: Lazy allocation of 0x1 bytes rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Lazy allocation of 0x8 bytes rid 0x18 type 4 at 0x170
atapci0: Lazy allocation of 0x1 bytes rid 0x1c type 4 at 0x376
ata1: at 0x170 irq 15 on atapci0
pci0: <network, ethernet> at device 13.0 (no driver attached)
pci0: <display, VGA> at device 14.0 (no driver attached)
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xf800-0xf8ff mem 0xffbea000-0xffbeafff irq 11 at device 15.0 on pci0
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xffbea000
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 2944 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xffbeb000-0xffbebfff irq 9 at device 16.0 on pci0
ahc1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xffbeb000
ahc1: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
orm0: <Option ROMs> at iomem 0xed000-0xedfff,0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20030 on isa0
sio0: type ST16650A, console
sio1 at port 0x2f8-0x2ff irq 3 flags 0x20000 on isa0
sio1: type ST16650A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0201> can't assign resources (port)
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
ppc1: parallel port not found.
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ad0: 9543MB <Maxtor 91000D8> [19390/16/63] at ata0-master BIOSPIO
ad1: 39082MB <Maxtor 54098U8> [79406/16/63] at ata0-slave BIOSPIO
ad2: 9543MB <Maxtor 91000D8> [19390/16/63] at ata1-master BIOSPIO
WARNING: Expected rawoffset 6506325, found 13012713
ad3: 19531MB <Maxtor 92048D8> [39683/16/63] at ata1-slave BIOSPIO
Waiting 5 seconds for SCSI devices to settle
da0 at ahc1 bus 0 target 0 lun 0
da0: <HP C3325W HP08> Fixed Direct Access SCSI-2 device 
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C)
da1 at ahc1 bus 0 target 8 lun 0
da1: <SEAGATE ST19171W HP06> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da2 at ahc1 bus 0 target 9 lun 0
da2: <SEAGATE ST19171W HP06> Fixed Direct Access SCSI-2 device 
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <YAMAHA CRW4260 1.0q> Removable CD-ROM SCSI-2 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/da0s1a
Entropy device is blocking. Dance fandango on keyboard to unblock.
IP packet filtering version 2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
pci0: driver added
pci0:13:0: reprobing on driver added
xl0: <3Com 3c905B-COMBO Fast Etherlink XL> port 0xf480-0xf4ff mem 0xffbe9c00-0xffbe9c7f irq 11 at device 13.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xffbe9c00
xl0: Ethernet address: 00:01:02:e0:2d:61
xl0: [GIANT-LOCKED]
pci0:14:0: reprobing on driver added
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Accounting enabled
>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040424225649.GA34672>