Date: Wed, 22 Jan 2014 16:12:05 +0100 From: Gerrit =?ISO-8859-1?Q?K=FChn?= <gerrit.kuehn@aei.mpg.de> To: Hans Petter Selasky <hps@bitfrost.no> Cc: freebsd-usb@FreeBSD.org Subject: Re: ATP USB flash failure (regression?) Message-ID: <20140122161205.77018862.gerrit.kuehn@aei.mpg.de> In-Reply-To: <52DFDBE8.10004@bitfrost.no> References: <20140122134116.1c589702.gerrit.kuehn@aei.mpg.de> <52DFC03F.6090002@bitfrost.no> <20140122154508.0958e414.gerrit.kuehn@aei.mpg.de> <52DFDBE8.10004@bitfrost.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 22 Jan 2014 15:55:36 +0100 Hans Petter Selasky <hps@bitfrost.no> wrote about Re: ATP USB flash failure (regression?): HPS> > I'm not sure I understand what to do here. The old quirk setting HPS> > that worked before was 0x0100. However, it looks like I cannot set HPS> > these, anyway: HPS> > root@mclane:~ # usbconfig -d 1.4 add_quirk NO_SYNCHRONIZE_CACHE HPS> > Adding quirk 'NO_SYNCHRONIZE_CACHE' failed, continuing. HPS> Correcting myself: HPS> usbconfig -d X.Y add_quirk UQ_MSC_NO_SYNC_CACHE I can add this just fine now. However, on reset it still fails: --- root@mclane:~ # usbconfig -d 1.4 add_quirk UQ_MSC_NO_SYNC_CACHE root@mclane:~ # usbconfig -d 1.4 reset umass0: at uhub3, port 5, addr 4 (disconnected) umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4101 umass0:8:0:-1: Attached to scbus8 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted --- Still no device node showing up. cu Gerrit
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140122161205.77018862.gerrit.kuehn>