Date: Tue, 31 Jan 2006 09:10:09 -0600 From: Nikolas Britton <nikolas.britton@gmail.com> To: freebsd-x11@freebsd.org Subject: [dri] DRIScreenInit failed. Disabling DRI. Message-ID: <ef10de9a0601310710j2017bd8axedb3ca2055fe7db1@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
------=_Part_27934_21582807.1138720209157 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hello, I cannot get DRI working after upgrading my system to a triple-head setup. I had X.org 6.8 & 6.9 DRI working just fine with the one AGP card (Radeon QL R200 8500 LE) but when I added the two PCI Radeon QY RV100 7000/VE cards DRI stopped working. Attached are copy's of dmesg (verbose), /var/log/Xorg.0.log, and /etc/X11/xorg.conf Thanks. ------=_Part_27934_21582807.1138720209157 Content-Type: application/octet-stream; name=dmesg Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg" ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 04 00 01 10 01 00 01 26 01 00 01 2b 01 00 01 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 VESA: 56 mode(s) found VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc0a7dd82 (1000022) VESA: ATI RADEON 8500 VESA: ATI Technologies Inc. R200 01.00 mem: <memory> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMXSDT> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086) pcibios: BIOS version 2.10 Found $PIR table, 14 entries at 0xc00f5c70 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 2 8 A 0x68 3 4 5 6 7 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15 embedded 0 3 D 0x63 3 4 5 6 7 10 11 12 14 15 embedded 0 1 A 0x62 3 4 5 6 7 10 11 12 14 15 slot 1 2 9 A 0x69 3 4 5 6 7 10 11 12 14 15 slot 1 2 9 B 0x6a 3 4 5 6 7 10 11 12 14 15 slot 1 2 9 C 0x6b 3 4 5 6 7 10 11 12 14 15 slot 1 2 9 D 0x68 3 4 5 6 7 10 11 12 14 15 slot 2 2 10 A 0x6a 3 4 5 6 7 10 11 12 14 15 slot 2 2 10 B 0x6b 3 4 5 6 7 10 11 12 14 15 slot 2 2 10 C 0x68 3 4 5 6 7 10 11 12 14 15 slot 2 2 10 D 0x69 3 4 5 6 7 10 11 12 14 15 slot 3 2 11 A 0x6b 3 4 5 6 7 10 11 12 14 15 slot 3 2 11 B 0x68 3 4 5 6 7 10 11 12 14 15 slot 3 2 11 C 0x69 3 4 5 6 7 10 11 12 14 15 slot 3 2 11 D 0x6a 3 4 5 6 7 10 11 12 14 15 slot 4 2 12 A 0x68 3 4 5 6 7 10 11 12 14 15 slot 4 2 12 B 0x69 3 4 5 6 7 10 11 12 14 15 slot 4 2 12 C 0x6a 3 4 5 6 7 10 11 12 14 15 slot 4 2 12 D 0x6b 3 4 5 6 7 10 11 12 14 15 slot 5 2 13 A 0x69 3 4 5 6 7 10 11 12 14 15 slot 5 2 13 B 0x6a 3 4 5 6 7 10 11 12 14 15 slot 5 2 13 C 0x6b 3 4 5 6 7 10 11 12 14 15 slot 5 2 13 D 0x68 3 4 5 6 7 10 11 12 14 15 embedded 2 3 A 0x68 3 4 5 6 7 10 11 12 14 15 embedded 2 4 A 0x6b 3 4 5 6 7 10 11 12 14 15 embedded 2 5 A 0x6a 3 4 5 6 7 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 1 AcpiOsDerivePciId: bus 0 dev 31 func 2 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: <ACPI PCI Link LNKF> irq 10 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: <ACPI PCI Link LNKG> irq 5 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/0 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2570, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x2571, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 0000ef00, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type 4, range 32, base 0000ef20, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type 4, range 32, base 0000ef40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24de, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 0000ef80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febffc00, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 0000fc00, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x24d1, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type 4, range 32, base 0000eff0, size 3, enabled map[14]: type 4, range 32, base 0000efe4, size 2, enabled map[18]: type 4, range 32, base 0000efa8, size 3, enabled map[1c]: type 4, range 32, base 0000efe0, size 2, enabled map[20]: type 4, range 32, base 0000ef60, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24d3, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type 4, range 32, base 00000400, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x24d5, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 4, range 32, base 0000ee80, size 6, enabled map[18]: type 1, range 32, base febff800, size 9, enabled map[1c]: type 1, range 32, base febff400, size 8, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xfe800000-0xfe8fffff pcib1: prefetched decode 0xc7f00000-0xd7efffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x514c, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0187, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base c8000000, size 27, enabled pcib1: (null) requested memory range 0xc8000000-0xcfffffff: good map[14]: type 4, range 32, base 0000b000, size 8, enabled pcib1: (null) requested I/O range 0xb000-0xb0ff: in range map[18]: type 1, range 32, base fe8f0000, size 16, enabled pcib1: (null) requested memory range 0xfe8f0000-0xfe8fffff: good pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 drm0: <ATI Radeon QL R200 8500 LE> port 0xb000-0xb0ff mem 0xc8000000-0xcfffffff,0xfe8f0000-0xfe8fffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xf8000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef00 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef20 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef40 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef80 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebffc00 ehci0: [GIANT-LOCKED] usb4: waiting for BIOS to give up control usb4: timed out waiting for BIOS usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xdfff pcib2: memory decode 0xfe900000-0xfeafffff pcib2: prefetched decode 0xd7f00000-0xf7efffff pcib2: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x11ab, dev=0x4320, revid=0x13 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base feaec000, size 14, enabled pcib2: (null) requested memory range 0xfeaec000-0xfeaeffff: good map[14]: type 4, range 32, base 0000d800, size 8, enabled pcib2: (null) requested I/O range 0xd800-0xd8ff: in range pcib2: matched entry for 2.5.INTA pcib2: slot 5 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=2, slot=9, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0080, statreg=0x0290, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e8000000, size 27, memory disabled pcib2: (null) requested memory range 0xe8000000-0xefffffff: good map[14]: type 4, range 32, base 0000d000, size 8, port disabled pcib2: (null) requested I/O range 0xd000-0xd0ff: in range map[18]: type 1, range 32, base feaf0000, size 16, enabled pcib2: (null) requested memory range 0xfeaf0000-0xfeafffff: good pcib2: matched entry for 2.9.INTA pcib2: slot 9 INTA hardwired to IRQ 21 found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=2, slot=11, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0080, statreg=0x0290, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, memory disabled pcib2: (null) requested memory range 0xe0000000-0xe7ffffff: good map[14]: type 4, range 32, base 0000c000, size 8, port disabled pcib2: (null) requested I/O range 0xc000-0xc0ff: in range map[18]: type 1, range 32, base fea90000, size 16, enabled pcib2: (null) requested memory range 0xfea90000-0xfea9ffff: good pcib2: matched entry for 2.11.INTA pcib2: slot 11 INTA hardwired to IRQ 23 found-> vendor=0x1102, dev=0x0002, revid=0x08 bus=2, slot=13, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000df80, size 5, enabled pcib2: (null) requested I/O range 0xdf80-0xdf9f: in range pcib2: matched entry for 2.13.INTA pcib2: slot 13 INTA hardwired to IRQ 21 found-> vendor=0x1102, dev=0x7002, revid=0x08 bus=2, slot=13, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000dff0, size 3, enabled pcib2: (null) requested I/O range 0xdff0-0xdff7: in range skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaec000-0xfeaeffff irq 22 at device 5.0 on pci2 skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeaec000 skc0: interrupt moderation is 100 us skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) skc0: PN: Yukon 88E8001 skc0: EC: Rev. 1.3 skc0: MN: Marvell skc0: SN: AbCdEfG334454 skc0: chip ver = 0xb1 skc0: chip rev = 0x09 skc0: SK_EPROM0 = 0x10 skc0: SRAM size = 0x010000 sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: bpf attached sk0: Ethernet address: 00:15:f2:1e:c0:b3 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto skc0: [MPSAFE] drm1: <ATI Radeon QY RV100 7000/VE> port 0xd000-0xd0ff mem 0xe8000000-0xefffffff,0xfeaf0000-0xfeafffff irq 21 at device 9.0 on pci2 info: [drm] Initialized radeon 1.16.0 20050311 on minor 1 drm2: <ATI Radeon QY RV100 7000/VE> port 0xc000-0xc0ff mem 0xe0000000-0xe7ffffff,0xfea90000-0xfea9ffff irq 23 at device 11.0 on pci2 can't re-use a leaf (name)! info: [drm] Initialized radeon 1.16.0 20050311 on minor 2 pcm0: <Creative EMU10K1> port 0xdf80-0xdf9f irq 21 at device 13.0 on pci2 pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xdf80 emu: setmap (3dfb0000, 800), nseg=1, error=0 emu: setmap (3e231000, 1000), nseg=1, error=0 pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: [MPSAFE] emu: setmap (3e98c000, 1000), nseg=1, error=0 emu: setmap (3e969000, 1000), nseg=1, error=0 emu: setmap (3e947000, 1000), nseg=1, error=0 emu: setmap (3e7a5000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap 3e76e000, 1000; 0xc243a000 -> 3e76e000 pcm0: sndbuf_setmap 3e92c000, 1000; 0xc2438000 -> 3e92c000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] atapci1: <Intel ICH5 SATA150 controller> port 0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef60-0xef6f irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xef60 atapci1: [MPSAFE] atapci1: failed to enable memory mapping! ata2: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xeff0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xefe4 ata2: reset tp1 mask=01 ostat0=80 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xefa8 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xefe0 ata3: reset tp1 mask=01 ostat0=7f ostat1=00 ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=00 devices=0x0 ata3: [MPSAFE] ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x400-0x41f irq 17 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x400 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: SPP ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered lapic: Divisor 2, Frequency 70000195 hz Timecounter "TSC" frequency 2380012948 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on Intel ICH5 chip ad0: setting UDMA100 on Intel ICH5 chip ad0: 76319MB <WDC WD800JB-00FMA0 13.03G13> at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on Intel ICH5 chip acd0: setting UDMA33 on Intel ICH5 chip acd0: <CREATIVEDVD1240E/3C14> DVDROM drive at ata1 as master acd0: read 6875KB/s (6875KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: setting PIO4 on Intel ICH5 chip acd1: setting UDMA33 on Intel ICH5 chip acd1: <YAMAHA CRW2200E/1.0C> CDRW drive at ata1 as slave acd1: read 6890KB/s (6890KB/s) write 3445KB/s (3445KB/s), 8192KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, packet acd1: Writes: CDR, CDRW, test write, burnproof acd1: Audio: play, 256 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: CD-ROM unknown ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 381554MB <Seagate ST3400832AS 3.03> at ata2-master SATA150 ad4: 781422768 sectors [775221C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ATA PseudoRAID loaded ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0 GEOM: new disk ad0 GEOM: new disk ad4 Trying to mount root from ufs:/dev/ad4s1a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered ------=_Part_27934_21582807.1138720209157 Content-Type: application/octet-stream; name=xorg.conf Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="xorg.conf" Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" LeftOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerFlags" Option "Xinerama" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "extmod" Load "glx" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "type1" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" #DisplaySize 350 260 # mm Identifier "Monitor0" VendorName "SAM" ModelName "SyncMaster 997DF" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 30.0 - 96.0 VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Monitor" #DisplaySize 370 280 # mm Identifier "Monitor1" VendorName "NEC" ModelName "NEC FE950+" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 30.0 - 96.0 VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Monitor" #DisplaySize 370 280 # mm Identifier "Monitor2" VendorName "NEC" ModelName "NEC FE950+" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 30.0 - 96.0 VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "PanelOff" # [<bool>] #Option "DDCMode" # [<bool>] #Option "MonitorLayout" # [<str>] #Option "IgnoreEDID" # [<bool>] #Option "UseFBDev" # [<bool>] #Option "MergedFB" # [<bool>] #Option "CRT2HSync" # [<str>] #Option "CRT2VRefresh" # [<str>] #Option "CRT2Position" # [<str>] #Option "MetaModes" # [<str>] #Option "MergedDPI" # [<str>] #Option "MergedXinerama" # [<bool>] #Option "MergedXineramaCRT2IsScreen0" # [<bool>] #Option "MergedNonRectangular" # [<bool>] #Option "MergedMouseRestriction" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "BIOSHotkeys" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> Identifier "Card0" Driver "ati" VendorName "ATI Technologies Inc" BoardName "Radeon R200 QL [Radeon 8500 LE]" BusID "PCI:1:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "PanelOff" # [<bool>] #Option "DDCMode" # [<bool>] #Option "MonitorLayout" # [<str>] #Option "IgnoreEDID" # [<bool>] #Option "UseFBDev" # [<bool>] #Option "MergedFB" # [<bool>] #Option "CRT2HSync" # [<str>] #Option "CRT2VRefresh" # [<str>] #Option "CRT2Position" # [<str>] #Option "MetaModes" # [<str>] #Option "MergedDPI" # [<str>] #Option "MergedXinerama" # [<bool>] #Option "MergedXineramaCRT2IsScreen0" # [<bool>] #Option "MergedNonRectangular" # [<bool>] #Option "MergedMouseRestriction" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "BIOSHotkeys" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> Identifier "Card1" Driver "ati" VendorName "ATI Technologies Inc" BoardName "Radeon RV100 QY [Radeon 7000/VE]" BusID "PCI:2:9:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "PanelOff" # [<bool>] #Option "DDCMode" # [<bool>] #Option "MonitorLayout" # [<str>] #Option "IgnoreEDID" # [<bool>] #Option "UseFBDev" # [<bool>] #Option "MergedFB" # [<bool>] #Option "CRT2HSync" # [<str>] #Option "CRT2VRefresh" # [<str>] #Option "CRT2Position" # [<str>] #Option "MetaModes" # [<str>] #Option "MergedDPI" # [<str>] #Option "MergedXinerama" # [<bool>] #Option "MergedXineramaCRT2IsScreen0" # [<bool>] #Option "MergedNonRectangular" # [<bool>] #Option "MergedMouseRestriction" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "BIOSHotkeys" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> Identifier "Card2" Driver "ati" VendorName "ATI Technologies Inc" BoardName "Radeon RV100 QY [Radeon 7000/VE]" BusID "PCI:2:11:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card2" Monitor "Monitor2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" EndSubSection EndSection ------=_Part_27934_21582807.1138720209157--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ef10de9a0601310710j2017bd8axedb3ca2055fe7db1>