Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Aug 2008 11:07:41 -0400
From:      "Kevin" <k@kevinkevin.com>
To:        "'Gavin Atkinson'" <gavin.atkinson@ury.york.ac.uk>
Cc:        freebsd-stable@freebsd.org
Subject:   RE: RTL8187 drivers for FreeBSD (usb wlan device)
Message-ID:  <005501c8fe1f$80f350d0$82d9f270$@com>
In-Reply-To: <20080814155037.A29502@ury.york.ac.uk>
References:  <004c01c8fe12$f2386df0$d6a949d0$@com> <20080814155037.A29502@ury.york.ac.uk>

next in thread | previous in thread | raw e-mail | index | archive | help
> Be aware that the RTL8187, RTL8187B and RTL8187L are all different
> chipsets.  I believe Linux has two drivers for them, one driver covers
> two
> chips.


I believe it is the RTL8187L chipset. The actual device is an Alfa Network
"AWUS036H" , product information is
http://dplanet.biz/alfa.com/product_info.php?products_id=342 .





> Some work on supporting USB under NDIS has been done, it might be worth
> investigating just how far from completion it is.

I'll look into this -- I believe ndisgen is built into freebsd by default,
however I'm not sure. 


> Linux drivers are often hard to port, purely because they are badly
> documented and often use "magic" values which may need to be different
> under FreeBSD.  I looked at the code a little while starting my own
> RTL8087B driver, but ended up preferring to monitor how Windows talked
> to
> the device.  Note, however, that my driver is nowhere near finished
> (doesn't even have code to send/receive yet), so there's no point me
> sending it to you...


Ideally I'd like to utilize a stable port/driver.
/usr/ports/devel/linux-kmod-compat was recommended to me
(http://info.iet.unipi.it/~luigi/FreeBSD/linux_bsd_kld.html) , however I
don't believe this to be a viable option since it was primarily developed to
"wrap" drivers for usb webcams.

Thanks for your suggestions, I will look into the ndisgen progress in any
case. Hopefully USB support is more defined, or will be more defined in the
near future.





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?005501c8fe1f$80f350d0$82d9f270$>