Date: Tue, 06 Nov 2007 04:37:24 -0500 From: "Aryeh M. Friedman" <aryeh.friedman@gmail.com> To: Jeremy Chadwick <koitsu@FreeBSD.org> Cc: freebsd-current@freebsd.org, d@delphij.net, Justin Hibbits <jrh29@alumni.cwru.edu> Subject: Re: [ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up Message-ID: <473035D4.3030200@gmail.com> In-Reply-To: <20071106091409.GB83703@eos.sc1.parodius.com> References: <472F466E.8050405@delphij.net> <472F5846.1020304@gmail.com> <472F5D9A.9050900@delphij.net> <472FCC15.9040903@gmail.com> <472FD0FB.9090608@delphij.net> <472FD23E.1060001@delphij.net> <47301CF6.8030808@delphij.net> <47301E91.7070303@gmail.com> <47301F40.8070605@delphij.net> <47302667.8030900@gmail.com> <20071106091409.GB83703@eos.sc1.parodius.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Jeremy Chadwick wrote: > On Tue, Nov 06, 2007 at 03:31:35AM -0500, Aryeh M. Friedman wrote: > >> Xin LI wrote: >> >>> Yes (so that you get the correct speed of ICH9, ironically I have >>> misunderstood the spec). I am working on a new patch. >>> >> The speeds are still incorrect (150 instead of 300) >> > > According to the thread and Wiki data I see, you're complaining that the > following two devices on your SATA bus are SATA150 when they should be > SATA300, correct? > > Master: ad8 <ST3500630AS/3.AAE> Serial ATA v1.0 > Master: acd0 <TSSTcorpCD/DVDW SH-S183L/SB01> Serial ATA v1.0 > yes btw due to god knows what reason the patch renumbered ad8 to ad6 > 1) Have you verified that the SATA150-limiting jumper on your Seagate > drive has been removed? SATA300 drives from Seagate come from the > factory with that jumper connected, limiting the drive to SATA150. > I will check but: 1. I was unaware of this "feature" 2. I didn't see any jumpers when I installed it > 2) Do you happen to be using a PATA-to-SATA adapter on the DVD drive? > It is native SATA (300) > 3) If No to #2, are you sure that the ICH9 does SATA300 with ATAPI > devices? Does the mainboard BIOS even support it for ATAPI? > Mobo has ATAPI I am not sure about the IHC issue though... will look it up and get back to you. -- Aryeh M. Friedman Developer, not business, friendly http://www.flosoft-systems.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?473035D4.3030200>