Date: Sun, 07 Feb 1999 14:25:17 -0500 From: "Louis A. Mamakos" <louie@TransSys.COM> To: current@FreeBSD.ORG Subject: problems getting USB support working Message-ID: <199902071925.OAA28040@whizzo.transsys.com>
next in thread | raw e-mail | index | archive | help
This is a multipart MIME message.
--==_Exmh_-8810908180
Content-Type: text/plain; charset=us-ascii
I've been trying to play with the USB support lately, and haven't got
much success. I'm running a 4.0-current freshly CVSUPed, and less
than 24 hours old. In summary, here's excepts from what I'm seeing
when doing a verbose boot that appear to be relevent. During a boot,
there is a few second pause before each timeout message below before
the driver seems to abandon all hope and give up.
FreeBSD 4.0-CURRENT #12: Sun Feb 7 13:54:03 EST 1999
louie@whizzo.transsys.com:/usr/src/sys/compile/PLAY
[...]
CPU: AMD-K6(tm) 3D processor (350.82-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x580 Stepping=0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
[...]
uhci0: <VIA 83C572 USB Host Controller> rev 0x02 int d irq 5 on pci0.7.2
usb0: USB version 1.0, interrupting at 5
found-> vendor=0x1106, dev=0x3040, revid=0x10
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
[...]
usbd_match
usb0: <VIA 83C572 USB Host Controller>
usbd_attach
usbd_new_device bus=0xf0956000 depth=0 lowspeed=0
usbd_new_device: adding unit addr=1, rev=100, class=9, subclass=0, protocol=0,
maxpacket=64, ls=0
usbd_new_device: new dev (addr 1), dev=0xf0967c80, parent=0xf0964240
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
usbd_set_config_index: (addr 1) attr=0x40, selfpowered=1, power=0, powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
uhub0: 2 ports with 2 removable, self powered
usbd_init_port: adding hub port=1 status=0x0108 change=0x0000
usbd_init_port: adding hub port=2 status=0x0309 change=0x0001
uhub_explore: status change hub=1 port=2
usbd_new_device bus=0xf0956000 depth=1 lowspeed=512
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
usbd_new_device: addr=2, getting first desc failed
usbd_remove_device: 0xf0967980
uhub_explore: usb_new_device failed, error=17(TIMEOUT)
uhub0: device problem, disabling port 2
usb0: Host System Error
usb0: controller halted
I have a single USB peripheral plugged in at the moment, which is a
USB-capable joystick.
This same machine in the same configuration when booted in Windows98 has
a working USB joystick, so I'm pretty sure the hardware isn't completely
broken, or that I've forgotten to plug something in.
Out of the config file:
# USB support
controller uhci0
controller ohci0
controller usb0
device ums0
device ukbd0
device ulpt0
device uhub0
device ucom0
device umodem0
device hid0
device ugen0
options USB_DEBUG
options USBVERBOSE
Any pointers on where to start looking, or how to proceed?
louie
--==_Exmh_-8810908180
Content-Type: text/plain ; name="dmesg"; charset=us-ascii
Content-Description: boot messages
Content-Disposition: attachment; filename="dmesg"
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #12: Sun Feb 7 13:54:03 EST 1999
louie@whizzo.transsys.com:/usr/src/sys/compile/PLAY
Calibrating clock(s) ... TSC clock: 350816426 Hz, i8254 clock: 1193253 Hz
Timecounter "i8254" frequency 1193253 Hz
Timecounter "TSC" frequency 350816426 Hz
CPU: AMD-K6(tm) 3D processor (350.82-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x580 Stepping=0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 128M bytes
Write Allocate 15-16M bytes: Enable
Hardware Write Allocate Control: Disable
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002e8000 - 0x07ff5fff, 131129344 bytes (32014 pages)
avail memory = 127688704 (124696K bytes)
Found BIOS32 Service Directory header at 0xf00faf20
Entry = 0xfb3a0 (0xf00fb3a0) Rev = 0 Len = 1
PCI BIOS entry at 0xb3d0
DMI header at 0xf00f5d20
Version 2.0
Table at 0xf0800, 28 entries, 817 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fbfc0
Preloaded elf kernel "kernel" at 0xf02d7000.
DEVFS: ready for devices
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=05971106)
Probing for devices on PCI bus 0:
found-> vendor=0x1106, dev=0x0597, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 3, range 32, base e0000000, size 26
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
found-> vendor=0x1106, dev=0x8598, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
found-> vendor=0x1106, dev=0x0586, revid=0x41
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
found-> vendor=0x1106, dev=0x0571, revid=0x06
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 00006400, size 4
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.7.1
via_571_status: Primary IDE prefetch/postwrite enabled/enabled
via_571_status: busmaster status read retry enabled
via_571_status: primary drive 0 data setup=4 active=3 recovery=1
via_571_status: primary ctrl active=16 recovery=1
via_571_status: secondary drive 1 udma method=0 enable=0 PIOmode=0 cycle=5
via_571_status: Primary IDE prefetch/postwrite enabled/enabled
via_571_status: busmaster status read retry enabled
via_571_status: primary drive 1 data setup=4 active=11 recovery=9
via_571_status: primary ctrl active=16 recovery=1
via_571_status: secondary drive 1 udma method=0 enable=0 PIOmode=0 cycle=5
ide_pci: busmaster 0 status: 64 from port: 00006402
ide_pci: ide0:0 has been configured for DMA by BIOS
ide_pci: ide0:1 has been configured for DMA by BIOS
via_571_status: Secondary IDE prefetch/postwrite enabled/disabled
via_571_status: busmaster status read retry enabled
via_571_status: secondary drive 0 data setup=4 active=3 recovery=1
via_571_status: secondary ctrl active=16 recovery=9
via_571_status: secondary drive 1 udma method=0 enable=0 PIOmode=0 cycle=5
via_571_status: Secondary IDE prefetch/postwrite enabled/disabled
via_571_status: busmaster status read retry enabled
via_571_status: secondary drive 1 data setup=4 active=11 recovery=9
via_571_status: secondary ctrl active=16 recovery=9
via_571_status: secondary drive 1 udma method=0 enable=0 PIOmode=0 cycle=5
ide_pci: busmaster 1 status: 64 from port: 0000640a
ide_pci: ide1:0 has been configured for DMA by BIOS
ide_pci: ide1:1 has been configured for DMA by BIOS
found-> vendor=0x1106, dev=0x3038, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[0]: type 4, range 32, base 00006800, size 5
uhci0: <VIA 83C572 USB Host Controller> rev 0x02 int d irq 5 on pci0.7.2
usb0: USB version 1.0, interrupting at 5
found-> vendor=0x1106, dev=0x3040, revid=0x10
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
found-> vendor=0x1011, dev=0x0009, revid=0x22
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 4, range 32, base 00006c00, size 7
map[1]: type 1, range 32, base e4000000, size 7
de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 10 on pci0.8.0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:42:d0:8a
bpf: de0 attached
found-> vendor=0x1102, dev=0x0002, revid=0x04
class=04-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 4, range 32, base 00007000, size 5
found-> vendor=0x1102, dev=0x7002, revid=0x01
class=09-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 00007400, size 3
Probing for devices on PCI bus 1:
found-> vendor=0x105d, dev=0x5348, revid=0x01
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 3, range 32, base a8000000, size 25
map[1]: type 3, range 32, base aa000000, size 25
map[2]: type 1, range 32, base d8010000, size 12
map[3]: type 1, range 32, base d8000000, size 16
map[4]: type 4, range 32, base 0000e000, size 8
vga0: <Number Nine model 5348 graphics accelerator> rev 0x01 int a irq 10 on pci1.0.0
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0 irq 12 flags 0xa00 on isa
psm0: model Generic PS/2 mouse, device ID 0, 2 buttons
psm0: config:00000a00, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x21 0x31 0x21 0x21
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: irq maps: 0x21 0x29 0x21 0x21
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pca0 on motherboard
pca0: PC speaker audio driver
ppc: parallel port found at 0x378
ppc0: 0x87 - 0xc 0x0 0xff 0x50 0x44 0x0 0x0 0x0 0x0 0x8c 0xa 0xc 0x28 0xab 0x0 0x0 0x0 0x0 0x0 0x0 0x7 0x0 0x1e 0xfc 0x21 0xff 0xde 0xfe 0xbe 0x23 0x25 0x43 0x60
ppc0: ECP+EPP SPP
ppc0 at 0x378 irq 7 on isa
ppc0: Winbond chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
lppps0: <Pulse per second Timing Interface> on ppbus 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC22500L>
wd0: 2441MB (4999680 sectors), 4960 cyls, 16 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0003, dmamword = 0000, apio = 0003, udma = 0000
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <ATAPI CD-ROM/>, removable, dma, iordy
acd0: drive speed 1367KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 27 59 4f 4f 9d 54 1b
ff ff 00 ef 0e 0f 00 00 07 80 7d 8f 1f 28 1f 1e
00 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 27 59 4f 4f 9d 54 1b
ff ff 00 ef 0d 0e 00 00 00 00 7d 8f 1f 28 1f 1e
00 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 27 59 4f 4f 9d 54 1b
ff ff 00 ef 0d 0e 00 00 00 00 7d 8f 1f 28 1f 1e
00 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 54083288 bytes/sec
bzero() bandwidth = 180799132 bytes/sec
joy0 at 0x201 on isa
joy0: joystick
imasks: bio c008c060, tty c003109a, net c0060400
usbd_match
usb0: <VIA 83C572 USB Host Controller>
usbd_attach
usbd_new_device bus=0xf0956000 depth=0 lowspeed=0
usbd_new_device: adding unit addr=1, rev=100, class=9, subclass=0, protocol=0, maxpacket=64, ls=0
usbd_new_device: new dev (addr 1), dev=0xf0967c80, parent=0xf0964240
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
usbd_set_config_index: (addr 1) attr=0x40, selfpowered=1, power=0, powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
uhub0: 2 ports with 2 removable, self powered
usbd_init_port: adding hub port=1 status=0x0108 change=0x0000
usbd_init_port: adding hub port=2 status=0x0309 change=0x0001
uhub_explore: status change hub=1 port=2
usbd_new_device bus=0xf0956000 depth=1 lowspeed=512
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
usbd_new_device: addr=2, getting first desc failed
usbd_remove_device: 0xf0967980
uhub_explore: usb_new_device failed, error=17(TIMEOUT)
uhub0: device problem, disabling port 2
usb0: Host System Error
usb0: controller halted
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
DEVFS: ready to run
bpf: tun0 attached
bpf: tun1 attached
bpf: lo0 attached
bpf: ds0 attached
Linux-ELF exec handler installed
de0 XXX: driver didn't set ifq_maxlen
lo0 XXX: driver didn't set ifq_maxlen
ds0 XXX: driver didn't set ifq_maxlen
Considering FFS root f/s.
changing root device to wd0s2a
wd0s1: type 0xe, start 207711, end = 2837519, size 2629809 : OK
wd0s2: type 0xa5, start 63, end = 207647, size 207585 : OK
wd0s3: type 0xa5, start 2837520, end = 4999679, size 2162160 : OK
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
de0: enabling 10baseT port
--==_Exmh_-8810908180
Content-Type: text/plain ; name="PLAY"; charset=us-ascii
Content-Description: kernel config file for "PLAY" machine
Content-Disposition: attachment; filename="PLAY"
machine "i386"
cpu "I586_CPU" # aka Pentium(tm)
ident PLAY
#
# The `maxusers' parameter controls the static sizing of a number of
# internal system tables by a complicated formula defined in param.c.
#
maxusers 20
config "kernel" root on da0 dumps on da0
options INCLUDE_CONFIG_FILE
options "COMPAT_43"
options USER_LDT #allow user-level control of i386 ldt
options SYSVSHM
options SYSVSEM
options SYSVMSG
options "VM86"
options KTRACE #kernel tracing
options UCONSOLE
options INET #Internet communications protocols
#options MROUTING # Multicast routing
options PERFMON
options "CLK_USE_I8254_CALIBRATION"
options "CLK_USE_TSC_CALIBRATION"
options DDB
options DDB_UNATTENDED
options INVARIANTS
options INVARIANT_SUPPORT
options USERCONFIG #boot -c editor
pseudo-device ether #Generic Ethernet
pseudo-device loop #Network loopback device
pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device tun 2 #Tunnel driver(user process ppp)
pseudo-device disc
options FFS #Fast filesystem
options FFS_ROOT
options NFS #Network File System
options "CD9660" #ISO 9660 filesystem
options FDESC #File descriptor filesystem
options KERNFS #Kernel filesystem
options MSDOSFS #MS DOS File System
options PROCFS #Process filesystem
options DEVFS #devices filesystem
options SOFTUPDATES #oh, boy!
pseudo-device pty 64 #Pseudo ttys - can go as high as 64
pseudo-device speaker #Play IBM BASIC-style noises out your speaker
pseudo-device vn #Vnode driver (turns a file into a device)
pseudo-device snp 3 #Snoop device - to look at pty/vty/etc..
options "MSGBUF_SIZE=40960"
options PPS_SYNC
#####################################################################
# HARDWARE DEVICE CONFIGURATION
# ISA and EISA devices:
# Currently there is no separate support for EISA. There should be.
# Micro Channel is not supported at all.
#
# Mandatory ISA devices: isa, sc or vt, npx
#
controller isa0
pseudo-device splash
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12 flags 0xa00
device vga0 at isa? port ? conflicts
device sc0 at isa? tty
device npx0 at isa? port "IO_NPX" irq 13
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
device sio0 at isa? port "IO_COM1" tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options IDE_DELAY=8000 # Be optimistic about Joe IDE device
# IDE CD-ROM driver - requires wdc controller and ATAPI option
device acd0
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device pca0 at isa? port IO_TIMER1 tty
device joy0 at isa? port "IO_GAME"
#
# PCI devices:
#
controller pci0
device de0
controller smbus0
controller iicbus0
controller iicbb0
controller ppbus0
device nlpt0 at ppbus?
device ppi0 at ppbus?
device pps0 at ppbus?
device lpbb0 at ppbus?
controller ppc0 at isa? port ? tty irq 7
# USB support
controller uhci0
controller ohci0
controller usb0
device ums0
device ukbd0
device ulpt0
device uhub0
device ucom0
device umodem0
device hid0
device ugen0
options USB_DEBUG
options USBVERBOSE
options COMPAT_LINUX
--==_Exmh_-8810908180--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902071925.OAA28040>