Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Feb 2008 11:14:26 -0500
From:      Dimitri Yioulos <dyioulos@firstbhph.com>
To:        freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 7RC2 and VMware tools
Message-ID:  <200802271114.27548.dyioulos@firstbhph.com>
In-Reply-To: <20080218215649.M25552@firstbhph.com>
References:  <20080217180601.M82827@firstbhph.com> <200802181558.27096.lists@jnielsen.net> <20080218215649.M25552@firstbhph.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 18 February 2008 5:02 pm, Dimitri Yioulos wrote:
> On Mon, 18 Feb 2008 15:58:26 -0500, John Nielsen wrote
>
> > On Monday 18 February 2008 01:47:14 pm Dimitri Yioulos wrote:
> > > On Mon, 18 Feb 2008 13:29:28 -0500, John Nielsen wrote
> > >
> > > > On Monday 18 February 2008 12:31:37 pm Dimitri Yioulos wrote:
> > > > > On Sun, 17 Feb 2008 22:44:17 -0500, John Nielsen wrote
> > > > >
> > > > > > On Sunday 17 February 2008 01:06:28 pm Dimitri Yioulos wrote:
> > > > > > > I'm not sure whether to have posted this here or on a VMware
> > > > > > > list; apologies if I'm in the wrong place.
> > > > > > >
> > > > > > > The other day, I did a fresh install of v. 7RC2 from the
> > > > > > > minimal CD on a CentOS 5.1 box running VMware server 1.0.4.  I
> > > > > > > had previously successfully installed v. 6.2, and upgraded to
> > > > > > > 6.3 on the same box. All has gone well, except for the
> > > > > > > installation of VMware Tools. Getting the Tools tarball and
> > > > > > > extracting the requisite files was trivial. However, when I try
> > > > > > > to run Vmware-Config-Tools.pl, I get a message saying that the
> > > > > > > program must be run on a virtual machine. Well, it is.  Is
> > > > > > > there a needed FBSD package I'm missing (the Tools install
> > > > > > > program doesn't complain about it).  A known issue, or bug,
> > > > > > > maybe?  Or is VMware support not yet enabled?  Help would be
> > > > > > > greatly appreciated.
> > > > > >
> > > > > > I just went through almost the same thing, installing FreeBSD 7
> > > > > > under VMware Workstation on Windows. The config-tools script has
> > > > > > a hard-coded version check which looks for libc.so.6 under /lib
> > > > > > only. Rather than mess with the script, I just hard-linked the
> > > > > > library from /usr/local/lib/compat (where it was installed by the
> > > > > > compat6x port). Seemed to work fine after that. You'll need to be
> > > > > > careful not to erase it if you ever run "make delete-old-libs",
> > > > > > though.
> > > > >
> > > > > Thanks for the response!
> > > > >
> > > > > A symlink won't do for the above?
> > > >
> > > > Try it and see! I think I decided on a hard link since the script
> > > > uses something like "if [ -f /lib/libc.so.6 ]" so it's looking only
> > > > for a regular file and not a symlink.
> > >
> > > Hmm, when I try to hard-link ("ln /usr/compat/linux/lib/libc.so.6
> > > libc.so.6"), I get "ln: ./libc.so.6: Cross-device link".  But, when I
> > > do a symlink, which takes, I get "/usr/libexec/ld-elf.so.1: Shared
> > > object "ld-linux.so.2" not found, required by "libc.so.6"" when i run
> > > vmware-config-tools.pl.  So, I symlink ld-linux.so.2, and run tools.
> > > Then, I get "/usr/libexec/ld-elf.so.1: Undefined symbol "__stdoutp"
> > > referenced from COPY relocation in /usr/local/sbin/vmware-checkvm".
> > > Arrgh.  Any other ideas?
> >
> > You have /usr on a different partition than / in your VM, so you can't do
> > a hard link. I would just copy the file back to /lib and not worry about
> > it. Linking in other random libraries will cause problems, as you've
> > observed.
> >
> > JN
>
> If I copy libc.so.6 to /lib, then tools complains about ld-linux.so.2.  If
> I copy ld-linux.so.2, it then complains about "/usr/libexec/ld-elf.so.1:
> Undefined symbol "__stdoutp" referenced from COPY relocation in
> /usr/local/sbin/vmware-checkvm".  This is pretty much the same as if I
> symlink the two files.  Even though I'm a "glass half-full" guy, this is
> beginning to look dire (but it's the worst thing to happen to me, I'm sure
> I'll live).  Still, it would be nice to get this working.

I did this a few days ago:

/lib/libc.so. existed.  I symlinked libc.so.6 to it.  I then proceeded to 
install VMware Tools without complaint.

However, I'm not sure if there's a vmware FreeBSD NIC driver.  If there is, 
it's not being used (as per dmesg, the AMD PCnet-PCI driver appears to be 
used).  On a Linux vm (please, no stone throwing  :-)  ), to use the vmxnet 
driver, I'd stop the network service, load the vmxnet driver module, then 
restart the service.  Is there a similar procedure on FreeBSD?

Thanks.

Dimitri

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200802271114.27548.dyioulos>