Date: Mon, 19 Jul 2004 21:20:13 GMT From: Alex K <lesha@intercaf.ru> To: freebsd-i386@FreeBSD.org Subject: Re: i386/68090: EHCI is not working with Intel 82801DB (ICH4) Message-ID: <200407192120.i6JLKDIi024087@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/68090; it has been noted by GNATS. From: Alex K <lesha@intercaf.ru> To: freebsd-gnats-submit@FreeBSD.org Cc: Subject: Re: i386/68090: EHCI is not working with Intel 82801DB (ICH4) Date: Tue, 20 Jul 2004 01:13:57 +0400 Lukas, now USB2.0 (Agrosy) disk connects ok, but stops responding after transfering about 50M of data with: da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: Invalid CSW: tag 442 should be 449 disk is detected as: umass0: vendor 0x0840 USB 2.0 Storage Device, rev 2.00/0.01, addr 2 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:3:0:-1: Attached to scbus3 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB 2.0 Storage Device 0100> Fixed Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 78533MB (160836480 512 byte sectors: 255H 63S/T 10011C) which is correct, only not sure about 1Mb/s, it gives me about 6-7Mb/s rate Sony Memory stick won't work, as I assume USB2.0 hubs are not yet supported. -- perl -e 'print unpack("u","1;&5S:&%`:6YT97)C868N<G4`");'
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200407192120.i6JLKDIi024087>