Date: Wed, 6 Dec 2000 16:33:29 +1300 From: "Dan Langille" <dan@langille.org> To: Rick Hamell <hamellr@1nova.com> Cc: freebsd-questions@freebsd.org Subject: Re: sym SCSI card problems during settle wait Message-ID: <200012060333.QAA11614@ducky.nz.freebsd.org> In-Reply-To: <Pine.BSF.4.21.0012041731540.532-100000@heorot.1nova.com> References: <200012060033.NAA09788@ducky.nz.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 4 Dec 2000, at 17:32, Rick Hamell wrote: > > > sym0: <810a> port 0x6100-0x61ff mem 0xc1001000-0x10010ff irq 9 at > > device 17.0 on pci0 > > sym0: No NVRAM, ID 7, Fast-10, SE parity checking > > > > The card has 53C810A on a SYMBIOS chip if that helps. > > > > The last message displayed is: > > Waiting 15 seconds for SCSI devices to settle. > > > > Then it stops and never comes back. Any ideas why? > > Usually it's poor termination, ID number duplication, or IRQ > sharing. thanks. I've looked through the probes. No IRQ sharing I could see. All conflicts were removed during the configuration stage. I've tried with a single SCSI disk to remove ID duplication possibilities. As for termination, I've tried 4 SCSI drives, each of which I think I've terminated properly. The card is a loaner and worked previously. So unless there's another idea, I'll start suspecting termination. -- Dan Langille The FreeBSD Diary - http://www.freebsddiary.org/ NZ ADSL - http://www.unixathome.org/adsl/ NZ Broadband - http://www.unixathome.org/broadband/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200012060333.QAA11614>