Date: Fri, 1 Feb 2002 13:08:13 -0800 From: "Remington" <madriax@garlic.com> To: "'Courtney Thomas'" <ccthomas@flash.net>, <freebsd-questions@FreeBSD.ORG> Subject: RE: Sound? Message-ID: <000001c1ab64$93361940$84038bd8@blah> In-Reply-To: <3C5B0548.5000701@flash.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hmm that's hard to say. At one point months ago I had my SB Live working and it worked gret with XMMS. Im not sure about the "digital" output though, I don't have digital speakers :( -----Original Message----- From: Courtney Thomas [mailto:ccthomas@flash.net] Sent: Friday, February 01, 2002 1:15 PM To: Remington Subject: Re: Sound? I am running the SBLive! 5.1 card also but don't have the "digital" output working. Does this channel work OK for your installation ? Appreciatively, Courtney Remington wrote: > I have a Sound Blaster Live! 5.1 Platimun and yes it is a custom kernel > > -----Original Message----- > From: Simon Siemonsma [mailto:simon.freebsd@hccnet.nl] > Sent: Friday, February 01, 2002 9:38 AM > To: Remington > Subject: Re: Sound? > > Which sound card do you have? > Did you build a new kernel? > > Simon Siemonsma > > On Friday 01 February 2002 07:34, you wrote: > >>Ok im having a problem getting my sound to work in FBSD 4.5-STABLE. My >>system looks like, this: >> >>FreeBSD 4.5-STABLE #0: Thu Jan 31 21:55:29 PST 2002 >> root@bathory.aria:/usr/src/sys/compile/Build2 >>Timecounter "i8254" frequency 1193182 Hz >>CPU: AMD Athlon(tm) Processor (1400.06-MHz 686-class CPU) >> Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 >> >> >> > Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, > >>MCA,CMOV,PAT,PSE36,MMX,FXSR> >> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> >>real memory = 536788992 (524208K bytes) >>config> di sn0 >>config> di lnc0 >>config> di ie0 >>config> di fe0 >>config> di ed0 >>config> di cs0 >>config> di bt0 >>config> di aic0 >>config> di aha0 >>config> di adv0 >>config> q >>avail memory = 517705728 (505572K bytes) >>Preloaded elf kernel "kernel" at 0xc047b000. >>Preloaded userconfig_script "/boot/kernel.conf" at 0xc047b09c. >>Pentium Pro MTRR support enabled >>md0: Malloc disk >>Using $PIR table, 9 entries at 0xc00f1370 >>npx0: <math processor> on motherboard >>npx0: INT 16 interface >>pcib0: <AMD-761 host to PCI bridge> on motherboard >>pci0: <PCI bus> on pcib0 >>pcib1: <AMD-761 PCI-PCI (4x AGP) bridge> at device 1.0 on pci0 >>pci1: <PCI bus> on pcib1 >>pci1: <NVidia GeForce2 GTS graphics accelerator> at 5.0 irq 11 >>isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 >>isa0: <ISA bus> on isab0 >>atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device >> > 4.1 > >>on pci0 >>ata0: at 0x1f0 irq 14 on atapci0 >>uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device >>4.2 on pci0 >>usb0: <VIA 83C572 USB controller> on uhci0 >>usb0: USB revision 1.0 >>uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub0: 2 ports with 2 removable, self powered >>ugen0: WINBOND W9967CF, rev 1.10/1.10, addr 2 >>uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device >>4.3 on pci0 >>usb1: <VIA 83C572 USB controller> on uhci1 >>usb1: USB revision 1.0 >>uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub1: 2 ports with 2 removable, self powered >>chip1: <VIA 82C686 ACPI interface> at device 4.4 on pci0 >>pcm0: <CMedia CMI8738> port 0xa400-0xa4ff irq 10 at device 5.0 on pci0 >>pcm1: <Creative EMU10K1> port 0xa000-0xa01f irq 7 at device 10.0 on >> > pci0 > >>atapci1: <Promise TX2 ATA100 controller> port >>0x8000-0x800f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 >>mem 0xe5800000-0xe5803fff irq 10 at device 11.0 on pci0 >>ata2: at 0x9400 on atapci1 >>ata3: at 0x8800 on atapci1 >>orm0: <Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcdfff on isa0 >>fdc0: direction bit not set >>fdc0: cmd 3 failed at out byte 1 of 3 >>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >>kbd0 at atkbd0 >>psm0: <PS/2 Mouse> irq 12 on atkbdc0 >>psm0: model Generic PS/2 mouse, device ID 0 >>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >>isa0 >>sc0: <System console> at flags 0x100 on isa0 >>sc0: VGA <16 virtual consoles, flags=0x300> >>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >>sio0: type 16550A >>sio1 at port 0x2f8-0x2ff irq 3 on isa0 >>sio1: type 16550A >>ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable >>ad0: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-master UDMA33 >>ad1: 6149MB <QUANTUM FIREBALL SE6.4A> [13328/15/63] at ata0-slave >> > UDMA33 > >>ad4: 12416MB <QUANTUM FIREBALL CR13.0A> [25228/16/63] at ata2-master >>UDMA66 >>Mounting root from ufs:/dev/ad1s1a >> >>And when I do a "cat /dev/dsp" it returns with: >> >>pcm1: record interrupt timeout, channel dead >>bathory# Jan 31 22:26:41 bathory /kernel: pcm1: record interrupt >>timeout, channe >>l dead >>Jan 31 22:26:41 bathory /kernel: pcm1: record interrupt timeout, >> > channel > >>dead >>Why does it do this? >>Windows, not worth the CD its burned on. >>-Remington >> >> >> >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-questions" in the body of the message >> > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c1ab64$93361940$84038bd8>