Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 17 Jan 2009 09:07:18 +1000
From:      Da Rock <rock_on_the_web@comcen.com.au>
To:        freebsd-questions@freebsd.org
Subject:   Re: age0 driver power issues - device_attach error 6
Message-ID:  <1232147238.1190.25.camel@laptop2.herveybayaustralia.com.au>
In-Reply-To: <3a142e750901160819l12b03cafvf2c9ddfb833d16b0@mail.gmail.com>
References:  <1232072061.22938.34.camel@laptop2.herveybayaustralia.com.au> <3a142e750901160819l12b03cafvf2c9ddfb833d16b0@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 2009-01-16 at 17:19 +0100, Paul B. Mahol wrote:
> On 1/16/09, Da Rock <rock_on_the_web@comcen.com.au> wrote:
> > I'm getting issues similar to what others have seen in the pre-release
> > 7.1. I'm using the release version because it supposedly has this
> > driver, but the issue is when I'm on battery it'll work and load the
> > driver, on ac forget it.
> 
> What is its output on battery and on ac? "pciconv -lvc"
> 

pciconf -lvc:

<snip>
age0@pci0:3:0:0:		class=0x020000 card=0x14e51043 chip=0x10481969
rev=0xb0 hdr=0x00
	vendor		= 'Attansic (Now owned by Atheros)'
	device		= 'L1 Gigabit Ethernet 10/100/1000Base-T Ethernet Controller'
	class		= network
	subclass	= ethernet
	cap 01[40]	= powerspec 2 supports D0 D3 current D0
	cap 05[48]	= MSI supports 1 message, 64 bit
	cap 10[58]	= PCI-Express 1 endpoint
	cap 03[6c]	= VPD
</snip>

dmesg:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE-p2 #0: Thu Jan 15 16:27:55 EST 2009
    admin@laptop1.herveybayaustralia.com.au:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (2194.51-MHz
K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 1051660288 (1002 MB)
avail memory  = 1013219328 (966 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem
0xfeb00000-0xfebfffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xfe900000-0xfe9fffff at device
2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xe000-0xe01f irq
16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xdc00-0xdc1f irq
21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xfeaff400-0xfeaff7ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <Syntek Semiconductor USB 2.0 Image Capture Controller, class
0/0, rev 2.00/0.05, addr 2> on uhub2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
age0: <Attansic Technology Corp, L1 Gigabit Ethernet> mem
0xfdcc0000-0xfdcfffff irq 18 at device 0.0 on pci3
age0: master reset timeout!
age0: reset timeout(0xffffffff)!
age0: PCI device revision : 0x00b0
age0: Chip id/revision : 0xffff
age0: invalid chip revision : 0xffff -- not initialized?
device_attach: age0 attach returned 6
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci7: <ACPI PCI bus> on pcib6
pci7: <network> at device 0.0 (no driver attached)
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xd880-0xd89f irq
23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xd800-0xd81f irq
19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xd480-0xd49f irq
18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xfeaff000-0xfeaff3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
axe0: <vendor 0x0b95 product 0x7720, class 255/255, rev 2.00/0.01, addr
2> on uhub6
axe0: AX88772, bufsz 1536, boundary 64
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: WARNING: using obsoleted if_watchdog interface
axe0: WARNING: using obsoleted IFF_NEEDSGIANT flag
axe0: Ethernet address: 00:40:f4:e5:e5:44
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib7
fwohci0: <1394 Open Host Controller Interface> mem 0xfe6ff800-0xfe6fffff
irq 16 at device 1.0 on pci8
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1e:8c:00:01:23:ab:c6
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x10e8000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:23:ab:c6
fwe0: Ethernet address: 02:1e:8c:23:ab:c6
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:01:23:ab:c6 @ 0xfffe00000000, S400,
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci8: <base peripheral> at device 1.1 (no driver attached)
pci8: <base peripheral> at device 1.2 (no driver attached)
pci8: <base peripheral> at device 1.3 (no driver attached)
pci8: <base peripheral> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel AHCI controller> port
0xe880-0xe887,0xe800-0xe803,0xe480-0xe487,0xe400-0xe403,0xe080-0xe09f
mem 0xfeaff800-0xfeafffff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [ATKG] -  FB,
should be 59 [20070320]
cpu0: invalid _CST state count (3 != 2)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6120b2806000b28
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <HL-DT-ST DVDRAM GSA-T20L/NR02> at ata0-master UDMA33
ad4: 152627MB <Seagate ST9160821AS 3.ALC> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a


I just noticed another problem in the dmesg- the acpi reference. Could
this relate the 2 problems (age0 and est1)? Should I be taking this to
the acpi list?

The laptop is an asus f3e series.

Cheers




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1232147238.1190.25.camel>