Date: Fri, 13 Sep 1996 13:45:05 -0700 From: Anthony Fleisher <fleisher@mind.net> To: Greg Flint <grflint@rs6000.cmp.ilstu.edu>, freebsd-questions@FreeBSD.ORG Subject: Re: Kernel Probs Message-ID: <2.2.32.19960913204505.009533ec@mind.net>
next in thread | raw e-mail | index | archive | help
Your problem is that the de0 device is for a NIC located on the pci bus, and you have the pci0 controller commented out. Remove the '#' from the pci0 line and all should work fine. (or, if you have no de0 device, comment that line out towards the end of the config file) Regards, ----------------------------------------------- Anthony Fleisher <fleisher@mind.net> System Administrator InfoStructure Ashland, Oregon Voice: (541)488-1962 Fax: (541)488-7599 ----------------------------------------------- At 10:46 PM 9/9/96 -0500, Greg Flint wrote: >This is my Kernel conf file. I get an error when I do the make. If anyone >could help me out with this one I would greatly appreciate it. >System Specs >VESA Local Bus >1.44 FD >420 HDD >486-DX 33 8M RAM >1M VESA Video Card >No CD-Rom >If you need more specs, lemmie know. Thanks, > Greg > >#Kernel by Greg Flint created on 9-5-96 for Quantex 486-33 8M RAM ># ># > >machine "i386" >cpu "I486_CPU" >ident GRFKERNEL >maxusers 10 > >options INET #InterNETworking >options FFS #Berkeley Fast Filesystem >#options NFS #Network Filesystem >#options MSDOSFS #MSDOS Filesystem >#options "CD9660" #ISO 9660 Filesystem >options PROCFS #Process filesystem >options "COMPAT_43" #Compatible with BSD 4.3 >options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device >options BOUNCE_BUFFERS #include support for DMA bounce buffers >options UCONSOLE #Allow users to grab the console > >options SYSVSHM >options SYSVSEM >options SYSVMSG > >config kernel root on wd0 > >controller isa0 >controller eisa0 >#controller pci0 ^^^^^^^^^^^^^^^^^^^^ Your problem is right HERE. > >controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr >disk fd0 at fdc0 drive 0 >#disk fd1 at fdc0 drive 1 >tape ft0 at fdc0 drive 2 > >controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr >disk wd0 at wdc0 drive 0 >disk wd1 at wdc0 drive 1 > >#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr >#disk wd2 at wdc1 drive 0 >#disk wd3 at wdc1 drive 1 > >#options ATAPI #Enable ATAPI support for IDE bus >#device wcd0 #IDE CD-ROM > >controller ncr0 >controller ahb0 >controller ahc0 > >#controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr >#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr >#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr >#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr >#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr >#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr >#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr > >#controller scbus0 > >#device sd0 > >#device st0 > >#device cd0 #Only need one of these, the code dynamically grows > >#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr >#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr > >#controller matcd0 at isa? port 0x230 bio > >#device scd0 at isa? port 0x230 bio > ># syscons is the default console driver, resembling an SCO console >device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr ># Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver >#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint >#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 >#options XSERVER # include code for XFree86 ># If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines >#options PCVT_SCANSET=2 # IBM keyboards are non-std > ># Mandatory, don't remove >device npx0 at isa? port "IO_NPX" irq 13 vector npxintr > ># ># Laptop support (see LINT for more options) ># >#device apm0 at isa? # Advanced Power Management >#options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS > >device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr >device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr >#device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr >#device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr > >device lpt0 at isa? port? tty irq 7 vector lptintr >#device lpt1 at isa? port? tty >#device mse0 at isa? port 0x23c tty irq 5 vector mseintr >#device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr >#device ># Order is important here due to intrusive probes, do *not* alphabetize ># this list of network interfaces until the probes have been fixed. ># Right now it appears that the ie0 must be probed before ep0. See ># revision 1.20 of this file. >device de0 ^^^^^^^^^^^ This device needs a pci controller. >device fxp0 >device vx0 >#device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr >#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr >#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr >device ep0 at isa? port 0x300 net irq 10 vector epintr >#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector >ixintr >#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr >#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr >#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr >#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr > >pseudo-device loop >pseudo-device ether >pseudo-device log >pseudo-device sl 1 ># ijppp uses tun instead of ppp device >pseudo-device ppp 1 >pseudo-device tun 1 >pseudo-device pty 16 >pseudo-device gzip # Exec gzipped a.out's > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2.2.32.19960913204505.009533ec>