Date: Tue, 5 May 2020 15:20:37 +0200 From: Polytropon <freebsd@edvax.de> To: Christoph Kukulies <kuku@kukulies.org> Cc: freebsd-questions@freebsd.org Subject: Re: Probe0 sym0 Error 5 unretryable error Message-ID: <20200505152037.f6c19bce.freebsd@edvax.de> In-Reply-To: <83C5D2F5-6ABC-4BFD-90A8-F5DA0F02BD08@kukulies.org> References: <83C5D2F5-6ABC-4BFD-90A8-F5DA0F02BD08@kukulies.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 5 May 2020 15:10:17 +0200, Christoph Kukulies wrote: > After powering down devices that were attached to the SCSI-bus (sym0), > an SCSI CDROM got detached. > > I did a camcontrol rescann all and the CDROM got attached again. > Nonethless an error was screened: > > cd1 at sym0 bus 0 scbus7 target 4 lun 0 > cd1: <TEAC CD-R55S 1.0R> Removable CD-ROM SCSI-2 device > cd1: Serial Number 8X32458B > cd1: 10.000MB/s transfers (10.000MHz, offset 8) > cd1: 656MB (335925 2048 byte sectors) > (probe0:sym0:0:4:7): INQUIRY. CDB: 12 e0 00 00 24 00 > (probe0:sym0:0:4:7): CAM status: Auto-Sense Retrieval Failed > (probe0:sym0:0:4:7): Error 5, Unretryable error > > Just for the record and if an SCSI/sym0 expert ca make head or tail of it? Maybe you can use # camcontrol reset all to make sure the controller can mark this bus as "not in use with any device"? -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20200505152037.f6c19bce.freebsd>