Date: Sat, 28 Dec 2013 15:58:54 +0000 From: James Griffin <jmzgriffin@gmail.com> To: freebsd-questions@freebsd.org Subject: Re: Remapkey spanish keyboard Message-ID: <52BEF53E.7060609@gmail.com> In-Reply-To: <20131228164937.00000273.emorrasg@yahoo.es> References: <CAMSA9wcJVFs57N0Mu=k2COZO=K3X=KsDUgcxsTmP9632kdf9AA@mail.gmail.com> <20131228164937.00000273.emorrasg@yahoo.es>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/28/2013 15:49, Eduardo wrote: > El Sat, 28 Dec 2013 10:35:07 -0200 > Isma Tim <ismatim@gmail.com> escribió: >> Hi FreeBSD, >> >> This is my first question in the post. I've made a research before to >> make a question. After the installation, some keys of my keyboard >> wasn't well mapped. So I started to do it manually. Using kbdcontrol >> -l mykey_spanish. I could map keys like '<', '>'; but the problem >> comes when I want to map keys like ´ñ´ or ´Ñ´ in ASCII its values are >> 164, and 165 respectively. I edited the file mapkey file in the >> column base, with the scan code 039, and replace the value for the >> ascii value. I reloaded again with the kbdcontrol command; but in the >> screen appears \244 when I pressed the key. Later, I replaced for the >> 'dtil' value, and then with 241 without luck. So: >> >> How it must to be setup? >> > Is this on X or on terminal tty? I'm not of my FreeBSDs now. > > If it's on terminal tty, adding the keymap in rc.conf is enough: > > keymap="spanish.iso.acc" > > (I think this is the keymap code, but not > sure). > > You can set it up while install the system, selecting the keymap on > first steps. > > If it's on X, you can use hald/dbus. Enable them on rc.conf and add > this code to file /usr/local/etc/hal/fdi/policy/x11-input.fdi > > <?xml version="1.0" encoding="ISO-8859-1"?> > <deviceinfo version="0.2"> > <device> > <match key="info.capabilities" contains="input.keyboard"> > <merge key="input.x11_options.XkbModel" > type="string">pc105</merge> <merge key="input.x11_options.XkbLayout" > type="string">es</merge> </match> > </device> > </deviceinfo> > > > Later I'll write again with my configuration > > HTH > You could try setxkbmap in your .xinitrc or .xsession ?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52BEF53E.7060609>