Date: Fri, 18 May 2007 10:47:12 -0400 (EDT) From: Justin Muir <justinkmuir@yahoo.ca> To: freebsd-questions@freebsd.org Subject: Intel Pro/Wireless 3945ABG - if_ipw not working Message-ID: <670997.4322.qm@web33507.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
--0-735367190-1179499632=:4322 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Content-Id: Content-Disposition: inline Hello, I load the module and I'm not getting the ipw0 device. If I'm reading the instructions (damien.bergamini.free.fr/ipw/ipw-freebsd.html) correctly, I should be able to: 1. load the driver 2. see the ipw0 device 3. load the firmware into the device with ipwcontrol. The if_ipw kernel module loads without errors. I checked the device/driver under windows and that's what it's showing - Intel Pro/Wireless 3945ABG, IRQ 17 I checked my dmesg output and there is a network device with IRQ 17, but it states there is no driver loaded. Not sure what I'm doing wrong here.... Any suggestions? Thx, jkm ps - dmesg and uname output attached Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca --0-735367190-1179499632=:4322 Content-Type: text/plain; name="uname.output" Content-Description: 101646099-uname.output Content-Disposition: inline; filename="uname.output" FreeBSD 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386 --0-735367190-1179499632=:4322 Content-Type: text/plain; name="dmesg.out" Content-Description: 1996018754-dmesg.out Content-Disposition: inline; filename="dmesg.out" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2147221504 (2047 MB) avail memory = 2096107520 (1999 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMRSDT> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168B/8111B PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfd8ff000-0xfd8fffff irq 16 at device 0.0 on pci2 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re0: Ethernet address: 00:18:f3:83:1f:f5 re0: [FAST] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci6: <ACPI PCI bus> on pcib5 uhci0: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xe880-0xe89f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xe480-0xe49f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered umass0: SanDisk Corporation Staples Relay, rev 2.00/0.10, addr 2 ugen0: Syntek Semiconductor USB 2.0 Image Capture Controller, rev 2.00/0.05, addr 3 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci8: <ACPI PCI bus> on pcib6 fwohci0: <1394 Open Host Controller Interface> mem 0xfeaff800-0xfeafffff irq 16 at device 1.0 on pci8 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:76:e9:ac fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:76:e9:ac fwe0: Ethernet address: 02:e0:18:76:e9:ac fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci8: <base peripheral> at device 1.1 (no driver attached) pci8: <base peripheral> at device 1.2 (no driver attached) pci8: <base peripheral> at device 1.3 (no driver attached) pci8: <base peripheral> at device 1.4 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 1 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ugen1: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2 ugen2: vendor 0x0b05 product 0x1712, rev 2.00/19.15, addr 3 Timecounters tick every 1.000 msec ad0: 114473MB <Seagate ST9120822AS 3.ALA> at ata0-master SATA150 acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/AS05> at ata1-master UDMA33 SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: < Staples Relay 0.1> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 977MB (2001888 512 byte sectors: 64H 32S/T 977C) Trying to mount root from ufs:/dev/ad0s3a --0-735367190-1179499632=:4322--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?670997.4322.qm>